How to activate cruise control in CRV?

1 Answers
KathrynDella
07/30/25 6:46am
To activate cruise control in CRV, follow these steps: 1. Press the power button to turn on the system, at which point the cruise control indicator light on the dashboard will illuminate; 2. Accelerate to the desired speed and press the SET button, allowing you to release the accelerator pedal as the speed is now fixed at the current rate; 3. If cruise control is canceled by braking or pressing the cancel button, you can press the RES button to resume the previous cruise control speed. The CRV is an SUV model under Honda, with body dimensions of 4585mm in length, 1855mm in width, and 1679mm in height, and a wheelbase of 2660mm. In terms of suspension, the CRV features an independent suspension design with front MacPherson struts and rear multi-link setup.
Was this review help?
11
5
Share
More Forum Discussions

Is the Lynk & Co 03 Sedan Equipped with a Volvo Engine?

The Lynk & Co 03 sedan is not equipped with a Volvo engine. The engine of the Lynk & Co 03 is jointly developed by Geely Auto and Volvo Cars. Taking the 2021 Lynk & Co 03 as an example, it belongs to the compact car category with body dimensions of 4639mm in length, 1840mm in width, and 1472mm in height, a wheelbase of 2730mm, and a curb weight of 1395kg. The 2021 Lynk & Co 03 features a MacPherson independent front suspension and a multi-link independent rear suspension. It is powered by a 1.5T turbocharged engine delivering a maximum horsepower of 156PS, a maximum power of 115kW, and a maximum torque of 245Nm, paired with a 6-speed manual transmission.
6
1
Share

What is the tire model of the Hyundai Elantra?

The tire model of the Elantra is 195/65r15. The following is a related introduction about tire pressure: Tire pressure: Both excessively high or low tire pressure will affect the service life of the tire. In winter, the tire pressure can be slightly higher than in summer. The recommended summer tire pressure is between 2.2-2.5bar, and the winter tire pressure should not exceed 2.8bar. Adjust the tire pressure appropriately according to the load conditions. Insufficient inflation pressure: Insufficient tire inflation pressure can also cause excessive tire wear, poor vehicle control, and reduced fuel economy. It may also lead to wheel deformation, so the tire inflation pressure should be kept within the specified value. Excessive inflation pressure: If the tire inflation pressure is too high, it will cause discomfort during driving, excessive wear in the center of the tire tread, and increase the possibility of tire damage on hazardous road surfaces.
9
2
Share

What are the methods for treating rust on a sedan?

Methods for treating rust on a sedan are: 1. Remove the paint from the rusted area using a wire brush or sandpaper, and decide whether to replace the entire panel or repair the damaged part based on the extent of the damage; 2. For severe damage, apply zinc sand to the hole and then spread filler around the sand, fill with filler, and repaint; 3. For minor damage, use thin aluminum sheet to patch, press it firmly onto the panel, then fill with filler and repaint. The reasons for car body rust include: 1. Uneven roads causing body vibration; 2. Engine operation-induced vibration leading to welded connections coming apart or cracking; 3. Sun exposure and extreme cold causing paint surface cracking; 4. Thin steel sheets being eroded by moisture, damaging the protective layers on both inner and outer surfaces, leading to gradual body corrosion.
16
5
Share

What Causes the Sound of Running Water in a Car's Air Conditioning System?

Car air conditioning systems produce a sound resembling running water due to water passing through the heater core. Below is relevant information about car air conditioning: 1. Compressor: Driven by the engine, it continuously draws in low-temperature, low-pressure refrigerant vapor generated by heat absorption and vaporization in the evaporator. After compression, it forms high-temperature, high-pressure refrigerant vapor, which is then discharged to the condenser, creating high-pressure conditions for continuous condensation and heat release in the condenser. Simultaneously, it overcomes the circulation resistance of the refrigerant in the cooling circuit. 2. Condenser: It releases the heat contained in the high-temperature, high-pressure refrigerant vapor discharged by the compressor to the outside air flowing through the condenser, and condenses the refrigerant vapor into refrigerant liquid at a certain temperature. Most condensers are located in front of the radiator at the front of the vehicle and are cooled by the cooling fan and the oncoming airflow generated by the car's movement.
17
5
Share

Which car brand has a horse logo?

There are four car brands with horse logos: Ferrari, Ford Mustang, Porsche, and Baojun. Here is the relevant information: 1. Ferrari logo: The most classic horse logo belongs to Ferrari. The prototype of the Ferrari logo is actually a heroic horse. As a well-known luxury car brand, the exquisite Ferrari logo exudes a sense of wildness and speed that leaps off the page, making it very vivid. 2. Ford Mustang logo: The Ford Mustang is a coupe brand under Ford, with a history spanning many years. Although it is not a million-dollar luxury car, it is still a high-end coupe. The Ford Mustang logo features a galloping mustang, which is very agile and dynamic, giving viewers an impulse to race. 3. Porsche logo: Porsche is a world-renowned luxury sports car brand. The Porsche logo also includes a horse in the middle, which is a famous local steed. This logo design is more noble and elegant, yet still very refined. 4. Baojun logo: 'Jun' means horse in Chinese. Therefore, the Baojun logo is not a donkey but a horse.
1
2
Share

What causes water accumulation under the rear floor mats of a Sylphy car?

Water under the floor mats of a Sylphy is typically caused by leaks from the cabin drain plug, sunroof drainage pipe, door seals, heater core antifreeze leakage, or damage/misinstallation of the air conditioning drainage pipe. To address water accumulation under the car mats, first remove the soaked mats and then clean out any remaining water inside the vehicle. Additional information: Solutions: If the water ingress is not severe, after removing the accumulated water, simply open the windows on sunny days to allow thorough drying. Park the car in a sunny area with the doors open for ventilation, or adjust the air circulation system to internal circulation to expel moisture from the cabin through the AC system. If the water ingress is serious, or if a musty odor persists after drying, it indicates that the flooring beneath the mats, including foam materials, has also absorbed moisture and may be moldy.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.