···
Log in / Register

How often should the brake pads of Lavida be replaced?

6Answers
JustinLee
09/02/2025, 04:29:43 AM

Lavida brake pads should be replaced every 60,000 to 70,000 kilometers. The replacement method for brake pads is as follows: 1. Open the engine compartment to check the brake fluid level to prevent overflow during replacement; 2. Remove the wheel where the brake is located; 3. Remove the bolts of the brake caliper and take out the brake pads; 4. Install new brake pads and tighten the guide bolts. Taking the 2021 Lavida as an example, it is a compact car with body dimensions of 4670mm in length, 1806mm in width, 1474mm in height, a wheelbase of 2688mm, a fuel tank capacity of 51 liters, and a trunk capacity of 510 liters.

Was this review help?
104
Share
MollyAnn
09/14/2025, 11:37:18 PM

I've driven the Lavida for many years, and brake pad replacement really depends on your driving style and road conditions. Generally, it's recommended to inspect them every 30,000-50,000 kilometers. In city driving with frequent stops and starts, where brakes are used more often, you might need to replace them just over 30,000 km. If you drive mostly on highways with less braking, they can last longer, up to 40,000-50,000 km. But don't just rely on mileage – regularly measure the thickness; replace them when they're down to 3 mm. Once I waited until I heard squeaking before fixing them, and the discs got damaged, costing me extra money and being dangerous. Weather also plays a role; driving in rainy or snowy conditions wears them out faster. It's best to do a quick thickness check during your biannual maintenance using a measuring tool, and always follow the owner's manual for safety. Remember, safety comes first – if your brakes fail, nothing else matters. Don't wait for the warning light to come on.

Was this review help?
12
Share
Expand All
DiLouis
10/29/2025, 12:16:41 AM

I'm the type who's extremely cautious about safety, and when it comes to driving the Lavida to pick up and drop off my kids, I never take the brake pads lightly. Experts say the Lavida's brake pads typically need replacement every 40,000 kilometers, but for peace of mind, I have them checked at the 4S store every 30,000 kilometers and consider replacing them if they're below 5mm. City driving during rush hour with frequent braking wears them out faster, and issues might arise as early as 20,000 kilometers. Always listen for sounds—any high-pitched squealing means an immediate check is needed. Don't forget to consider the material; original factory pads last longer, while aftermarket ones might fail sooner. Brakes are a matter of life and death, so don't skimp on cost or time. Checking is simple—the technician can do it in two minutes during maintenance. The manual is the bible; the Lavida's design ensures good compatibility, so following it is the most worry-free approach. Don't trust random guesses online; measuring them yourself is also easy.

Was this review help?
14
Share
Expand All
VanGemma
12/11/2025, 11:28:31 PM

I've done quite a few car modifications, and the lifespan of Lavida brake pads varies greatly. Material is key: ceramic pads can last 50,000-60,000 km, while organic ones last around 30,000 km. Driving habits also matter - aggressive driving with hard braking means faster replacement, while smooth driving extends their life. I recommend checking thickness every 10,000 km using simple tools; replace when only 3mm remains. Don't ignore the warning light on Lavida's dashboard. High temperatures or slippery roads accelerate wear. Never choose cheap inferior products when replacing - OEM parts have better compatibility, saving money may damage the rotors. I check them during seasonal maintenance.

Was this review help?
3
Share
Expand All
SanColin
02/01/2026, 12:37:36 AM

Driving a Lavida for daily commute is a nightmare in traffic jams, and the brake pads wear out super fast. Normally they need replacement every 30,000-40,000 km, but with constant braking in the city, you should pay attention after just 2 years. My car had them replaced at just over 30,000 km when I noticed the brakes felt soft. If you drive less on highways, the wear is slower and they might last until 40,000 km. Regularly checking the thickness is crucial—have the mechanic measure it during maintenance. Listen for any unusual noises or vibrations; those are warning signs. Brake more often in rain or snow, which shortens their lifespan. Don’t wait until they fail—it’s a major safety risk. And remember to choose high-quality replacements.

Was this review help?
10
Share
Expand All
AlexandraMarie
04/26/2026, 05:50:33 PM

When I first bought my Lavida, I was also worried about this—there's no fixed rule for when to replace brake pads. I asked a technician, who said it's usually around 40,000 kilometers, but it depends on your driving habits. New drivers tend to brake hard, so they may need replacements sooner; experienced drivers who drive smoothly can go longer. Checking the thickness is crucial—below 3 millimeters is dangerous, so it's recommended to measure it every 20,000 kilometers. The Lavida has a warning function, so don’t ignore any sounds or warning lights. A friend of mine ignored it and ended up in an accident. For safety, stick to regular maintenance checks and use the manual’s recommendation of 30,000–50,000 kilometers as a guideline. Consulting a professional shop doesn’t cost much.

Was this review help?
15
Share
Expand All
More Q&A

How to Drive the Envision?

Envision driving method: First, turn on the power, press the brake, shift to N gear, then start the ignition. After that, shift from N gear to D gear, release the handbrake, lift the foot brake, and start moving. When parking, press the foot brake until the vehicle comes to a complete stop, then move the gear lever to N gear, engage the handbrake, shift the gear lever to P gear, and turn off the ignition. The Envision is a model under Shanghai General Motors, with a length of 4686 mm, width of 1839 mm, height of 1660 mm, and a wheelbase of 2750 mm. In terms of configuration, this car is equipped with an ACC adaptive cruise system, LKA lane-keeping system, SBZA side blind zone warning system, APA automatic parking system, intelligent headlight system, FDI front distance indicator, etc.
116
Share

Is the Auto Start-Stop Light On Indicating Activation or Deactivation?

Auto Start-Stop light on indicates deactivation. When the vehicle is initially started, the Auto Start-Stop system defaults to the activated state, and the light remains off. If the Auto Start-Stop is turned off, there will be a prompt on the dashboard: a yellow light illuminates, with a circular A symbol accompanied by the letters OFF below, indicating the Auto Start-Stop is deactivated. The display may vary depending on the vehicle model; some models show a circular A with a diagonal slash. The working principle of Auto Start-Stop involves embedding an enhanced motor with idle start-stop functionality into a traditional engine. This allows the engine to completely shut off and cease operation when the vehicle meets the conditions for idling stop. When the vehicle needs to start moving again, the idle start-stop motor system quickly responds to the driver's start command, rapidly restarting the engine.
109
Share

What is the difference between manual transmission and automatic transmission cars?

Manual transmission and automatic transmission cars differ mainly in the complexity of operation: Manual transmission cars rely primarily on the driver manually operating the clutch to change gears, which is more cumbersome and requires higher driving skills, resulting in greater physical exertion and mental effort; Automatic transmission cars utilize the hydraulic torque converter's automatic shifting principle to complete gear changes, allowing beginners with limited automotive knowledge to quickly adapt, with significantly reduced physical and mental workload. The gear positions of an automatic transmission car include: 1. P (Parking) gear: When the gear lever is in this position, the drive wheels are mechanically locked, and the engine can be started; 2. R (Reverse) gear: Simply press the unlock button on the gear lever without needing to depress the brake pedal.
117
Share

What does 102h on a tire represent?

102h on a tire represents: 102 indicates the load index of the tire, with 102 corresponding to a maximum single-tire load capacity of 850 kilograms; h represents the speed rating of the tire, with h corresponding to a maximum speed of 210 kilometers per hour. The method for identifying tire models is: 1. The tire width in mm is the percentage of the tire thickness to the tire width; 2. R stands for rim diameter (in inches); 3. The tire is marked with speed limit symbols, represented by letters such as P, R, S, T, H, V, Z, etc., indicating the maximum speed at which the tire can carry the specified load under specified conditions. Tires are circular elastic rubber products assembled on various vehicles or machinery for ground rolling.
103
Share

Are Japanese Cars Really Thin-Skinned and Unsafe?

Of course they are safe, because sufficient structural strength ensures safety, and Japanese cars are not lacking in body structural strength. Here is some relevant information about Japanese cars: Japanese brand image: Japanese brand sedans, whether Honda or Toyota, have representative models characterized by fuel economy, stable performance, exquisite interiors, and high cost-effectiveness. The Guangzhou Honda Accord sedan set a price benchmark for mid-to-high-end cars upon its new product launch, with a price reduction exceeding expectations. Types of Japanese car brands: Toyota TOYOTA, Nissan NISSAN, Honda HONDA, Lexus LEXUS, Infiniti INFINITI, Acura ACURA, Subaru SUBARU, Mazda MAZDA, Mitsubishi MITSUBISI, Isuzu ISUZU, Suzuki SUZUKI, Daihatsu, Mitsuoka.
105
Share

What Color Stickers Suit a Brown Car Body?

For a golden brown car body, black stickers can create a striking visual effect. Here is some relevant information about car stickers: Introduction: Car stickers are decorative elements applied to vehicles, glass, motorcycles, and other surfaces for aesthetic enhancement. They can be broadly categorized into three types: sports stickers, modification stickers, and personalized stickers. Materials: The primary material for car stickers is PVC outdoor adhesive specifically designed to withstand outdoor conditions. These materials are more durable and UV-resistant compared to standard advertising-grade materials. While the variety of textures and colors may not be as extensive as fabric options for clothing, there are still numerous choices available, including standard, glow-in-the-dark, metallic reflective, laser reflective, and metallic brushed finishes.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.