How often should the brake fluid of Teana be replaced?

1 Answers
EthanDella
07/29/25 11:44pm
The brake fluid of Teana should generally be replaced every 2 years or 40,000 kilometers. The main functions of brake fluid are: 1. It has a very low freezing point and maintains good fluidity at low temperatures; 2. The boiling point of automotive brake fluid is extremely high, preventing vapor lock at high temperatures; 3. When using automotive brake fluid, you will notice minimal quality changes, and it does not cause corrosion to metals or rubber. Additional notes: There are several points to pay attention to when using brake fluid: 1. Do not mix different types or brands of brake fluid, as different formulations can lead to a decline in the performance of the brake fluid. 2. If the brake fluid absorbs moisture or contains impurities, it should be replaced or filtered promptly; otherwise, it may result in insufficient braking pressure and affect braking performance. 3. If the vehicle has been driven normally for 40,000 kilometers or the brake fluid has been in continuous use for more than 2 years, the brake fluid may deteriorate due to prolonged use and should be replaced promptly. 4. During normal driving, if you experience inconsistent braking force, the brake fluid should be replaced immediately. Before replacement, clean the braking system thoroughly with alcohol.
Was this review help?
12
3
Share
More Forum Discussions

Do Commuter Cars Require a Driver's License?

Commuter cars require a driver's license. The so-called fully enclosed, battery-powered "commuter vehicles" fall under the category of motor vehicles and must be registered with the vehicle management department. The driver must hold a valid license, and all necessary procedures must be completed. Otherwise, driving such a vehicle on the road is illegal. Here is some relevant information about commuter vehicles: 1. As of June 2019, there is no clear legal definition for "commuter vehicles." Driving a commuter vehicle without a license is illegal. 2. Ordinary simple commuter vehicles are classified under the category of "motorized wheelchairs for the disabled." These vehicles must also comply with relevant national standards to be allowed on the road, and the driver must hold a specialized "driver's license."
12
1
Share

What does it mean when a red light on the car dashboard is on?

When a red light on the car dashboard is illuminated, it indicates that the anti-theft system is activated. If the car door is not properly closed and cannot be locked, the hazard warning lights will flash. Below is additional information: 1. Car Dashboard: The door status indicator light shows whether the doors are fully closed. When a door is open or not properly closed, the corresponding indicator light will illuminate, alerting the driver that the door is not shut properly. The light turns off once the door is closed. 2. Parking Brake Indicator: This light turns on when the parking brake handle (i.e., handbrake) is pulled up. The light automatically turns off when the handbrake is released. In some car models, this light may also illuminate when the brake fluid level is low.
20
4
Share

What are the methods to prevent fogging on rearview mirrors?

To defog the rearview mirrors, you can activate the rearview mirror heating function. Below are the specific details about the rearview mirror heating function: 1. Function: After pressing the button, the electric heating elements behind the rearview mirror glass will quickly heat up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. Warm air will emerge from both left and right rearview mirrors, and the water droplets on the mirror surface will gradually evaporate due to the rising temperature, causing the fog to slowly disappear. This effectively heats the mirror, removing fog and frost. 2. Usage during engine operation: When using the rearview mirror heating function, ensure the vehicle is in an active state. Avoid using this function when the car is cold. If the battery is low on charge or malfunctioning, the rearview mirror heating may not activate. 3. Duration of use: Each use should not exceed 30 minutes, as prolonged use may affect the mirror's lifespan and clarity.
7
4
Share

What Does Mid-Cycle Facelift Mean?

Mid-cycle facelift refers to some modifications made to the exterior of a car, enhancing its recognizability through detailed changes. Here are some introductions about mid-cycle facelifts in automobiles: 1、Defects: In essence, a mid-cycle facelift is a series of modifications made to keep up with automotive trends and narrow the gap with later models. For consumers, facelifted models often appear somewhat abrupt in terms of exterior changes, lacking overall harmony. 2、Notes: Initially, it mainly addresses issues that arise after the new car's release, and repairs are usually very necessary. Therefore, purchasing the initial version of this car is relatively cost-effective. After some time of experience accumulation, many problems are resolved. Engine performance needs to be recalibrated, such as increasing horsepower, enlarging wheels, etc.
2
4
Share

What is the fuel tank capacity of the XC60 in liters?

The fuel tank capacity of the Volvo XC60 is 70 liters, as officially announced. The recommended fuel grade for the Volvo XC60 is 95, with a fuel consumption of 7.0-7.4L per 100 kilometers. A full tank can cover a distance of 946-1000km. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. Generally, the fuel level is observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will accurately reflect on the gauge. The fuel gauge typically has 5 to 6 segments. It is advisable to refuel when there are about 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space is designed to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
6
4
Share

Running-in Period RPM?

During the running-in period of a new car, it is generally best to keep the RPM around 3000, as this is most beneficial for vehicle maintenance. Below are some relevant details about RPM: 1. For domestic cars during the running-in period, the speed should ideally be between 40 to 70 km/h, while for imported cars, it should generally be within 100 km/h, with the RPM kept below 3000 rpm. 2. This is because the surfaces of new rotating components always have certain imperfections, which can cause insufficiently tight contact and meshing between parts during operation, leading to more intense friction at the contact points. 3. The process where new rotating components undergo a period of operation and friction to achieve very close contact and smooth surfaces in their meshing and joining is called the running-in process.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.