How often should fuel system cleaner be added?

2 Answers
StMaddox
07/25/25 6:10am
Fuel system cleaner should be added every 5,000 kilometers. More information about fuel system cleaner is as follows: 1. Introduction: Fuel system cleaner is a general term for cleaning agents that remove carbon deposits, gum, and sludge from fuel injectors, intake valves, cylinder walls, piston tops, and intake pipes. Using such products can significantly reduce harmful emissions from vehicle exhaust, help vehicles pass exhaust tests, restore engine power, and improve engine efficiency and fuel economy. 2. Product benefits: Removes gum and dirt from the fuel system; Saves fuel and reduces exhaust emissions; Protects engine components and effectively prevents corrosion and rust.
Was this review help?
3
2
Share
PhoebeRose
08/10/25 6:03pm
I've been driving for over a decade and always pay attention to maintenance. As for fuel system cleaners, adding one every 5,000 to 10,000 kilometers is generally sufficient. New cars don't need it for the first couple of years—start using after driving 20,000-30,000 kilometers. Monitoring engine condition is crucial: if you notice slower acceleration, unexplained increased fuel consumption, or obvious idle vibration, it might indicate carbon buildup, and you should add a bottle promptly. I prefer adding it before long trips—the cleaning effect is excellent after highway driving since high engine temperatures help burn off carbon deposits. Always choose reputable brands; avoid random products recommended at gas stations.
Was this review help?
14
5
Share
Expand All
More Forum Discussions

Why Did the Coolant Change from Green to Brown?

The reasons for the coolant changing from green to brown are: 1. The coolant has reached the replacement mileage or time limit; 2. When replacing the new coolant, the old coolant in the vehicle was not completely drained, causing a chemical reaction when mixed with the new coolant. The steps to replace the coolant are: 1. Unscrew the radiator cap to drain the coolant; 2. Run the engine at idle and inject clean water until the radiator discharges clean water; 3. Close the water valve after the clean water has completely drained; 4. Add new coolant until the liquid level is between the max and min water level marks; 5. Close the cap and let the engine idle for two to three minutes. The functions of the coolant are: 1. To provide anti-freeze protection for the engine against low-temperature environments; 2. To offer efficient heat dissipation; 3. To prevent the coolant from freezing and cracking the radiator or damaging the engine cylinder block and cylinder head during cold winter parking.
8
2
Share

What does a cumulative score of 0 mean?

A cumulative score of 0 means no points have been deducted yet. Driving license point rules: Class C license: If 12 points are accumulated within a scoring cycle, the license holder must attend a training course at the vehicle management office as required, followed by an exam. The license can only be used again after passing the exam. For Class A and B licenses, accumulating 12 points within a scoring cycle not only requires attending training and passing an exam but also results in license downgrade. Driving license point deduction rules: Driving under the influence of alcohol, driving a vehicle that does not match the license type, or overloading a school bus will result in 12 points deducted at once; driving with a suspended license or violating traffic signals will result in 6 points deducted at once; driving below the minimum speed limit on highways or failing to undergo regular safety inspections will result in 3 points deducted at once; not driving according to regulations or engaging in behavior that hinders safe driving will result in 2 points deducted at once, etc.
12
2
Share

How to Use the Windshield Wipers on a Mercedes-Benz?

Here is how to use the windshield wipers on a Mercedes-Benz: 1. The windshield wipers on a Mercedes-Benz are controlled by the lever on the left side of the steering wheel, and the usage method is the same as that of vehicles where the wipers are controlled by the right-side lever. 2. To activate the washer jets, press the button on the top of the control lever. Additional Information: 1. The wiper integrated into the lever on a Mercedes-Benz is divided into three parts: A, B, and C. 2. Part A is a silver button located at the end of the lever, which controls the washer function of the front wipers; Part B controls the oscillation speed of the front wipers, with five settings starting from 0, representing wiper stop, low-frequency intermittent oscillation, high-frequency intermittent oscillation, continuous low-speed oscillation, and continuous high-speed oscillation; Part C is a toggle switch mainly used to adjust the washer and oscillation of the rear window wiper.
1
4
Share

What is the actual range of Tesla Model Y?

Tesla Model Y Standard Range Rear-Wheel Drive version has an NEDC range of 525 km, Long Range All-Wheel Drive version has an NEDC range of 594 km, and Performance All-Wheel Drive version has an NEDC range of 540 km. Real Range Explanation: The actual range in real-world usage for each version will be lower than the NEDC range, depending on factors such as whether the air conditioning is on, vehicle load, external temperature, etc. Factors Affecting Range: The vehicle's range is influenced by various other factors, such as battery high-low temperature technology, battery BMS technology optimization, vehicle energy recovery system upgrades, body lightweighting, and hardware energy-saving technologies. Additionally, factors like external driving conditions, air resistance coefficient, mechanical transmission efficiency, vehicle mass, and number of passengers can all affect the actual range of an electric vehicle.
20
5
Share

How to fix P0172 code in Toyota Camry?

Toyota Camry P0172 code solutions are: 1. Replace the engine's oxygen sensor; 2. Replace the engine's ignition coils and spark plugs; 3. Clean the engine's intake and exhaust systems; 4. Clean the vehicle's evaporative emission system; 5. Inspect and replace the mass airflow sensor; 6. Clean the fuel injectors and fuel lines, replace the fuel filter; 7. Replace the engine's PCV system and clean the throttle body. Taking the 2021 Toyota Camry as an example, it is a mid-size sedan with body dimensions of: length 4885mm, width 1840mm, height 1455mm, wheelbase 2825mm, and curb weight 1530kg. The 2021 Toyota Camry features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 2.0L naturally aspirated engine producing maximum power of 178PS (131kW) and maximum torque of 210Nm, paired with a 10-speed continuously variable transmission.
2
5
Share

What are the functions of the Haval M6 Plus key?

Haval M6 Plus key functions include: 1. Unlock button; 2. Lock button; 3. Trunk opening button (press twice consecutively to open the trunk); 4. Remote start button (usable when the vehicle is locked); 5. Automatic parking button (press and hold for 3 seconds after use to exit remote control mode). Taking the 2021 Haval M6 as an example, it is a compact SUV with body dimensions of 4664mm in length, 1830mm in width, 1729mm in height, and a wheelbase of 2680mm. The vehicle weight is 1500kg. The 2021 Haval M6 features a MacPherson independent front suspension and a double-wishbone independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 210Nm, and a maximum power of 110kW, paired with a 6-speed manual transmission.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.