How often should a new car be waxed?

2 Answers
Jocelyn
07/24/25 2:15am
Generally, a new car should not be waxed casually. Because the paint layer of a new car already has a layer of protective wax, waxing too early will remove the original wax on the surface of the new car, causing unnecessary waste. Usually, there is no need to rush to wax a new car within a few months of purchase. Depending on the driving environment and parking location of the vehicle, the interval for waxing should also vary. Here are the specific details: 1. Cars parked in garages: For vehicles that are usually parked in garages and mostly driven on good roads, waxing once every 3-4 months is sufficient. 2. Cars parked outdoors: For vehicles parked outdoors, exposed to wind and rain, it is best to wax them every 2-3 months.
Was this review help?
4
5
Share
MacOlive
08/10/25 9:54pm
How often should you wax a new car? I think this should be discussed based on personal experience. When I bought my first car, the salesperson told me that new cars come with a factory protective coating, so waxing too early would be a waste. I waited six months before getting a professional wax, and the car looked so shiny that dirt just wiped right off. Since then, I wax every three months because there's a lot of dust in the city, and wax helps block UV rays and prevent paint aging. Don't listen to people who say you can wait indefinitely—regular waxing keeps your car's value high, so it'll still be worth something when you sell it used years later. The key is not to wait too long, or the paint will dull and you'll end up spending more on touch-ups. My advice to beginners is not to rush; waiting six months is a good starting point.
Was this review help?
1
5
Share
Expand All
More Forum Discussions

What Causes Air Leakage from the Driver's Door?

Here are the reasons for air leakage from the driver's door: 1. Deformation of the door hinge. A deformed door hinge can affect the door's sealing performance. 2. Premature aging of rubber. The door sealing strip is made of rubber, and improper maintenance or other reasons during daily use can cause the rubber to age prematurely, thereby affecting the door's sealing performance. It is recommended to visit a 4S store for adjustment or replacement of the door sealing performance. Additional information: The method for replacing the door sealing strip is as follows: 1. Remove the trim panel. For aesthetic and fixing purposes, most vehicle models on the market have their sealing strips wrapped with a door skirt trim panel. To remove the sealing strip, first, this part of the trim panel needs to be removed. The removal method is simple: similar to removing a phone back cover to replace the battery, just push and pull upwards with force to easily remove it. 2. Pry off the sealing strip. Since there are no clips, removing the sealing strip is much easier than removing the trim panel. Just pry it open with both hands. Note: It's best to remove the sealing strip from top to bottom to save effort. 3. Replace the sealing strip. Since the sealing strip has the same shape as the door structure, when replacing, the corners of the sealing strip should correspond to the door corners for accurate installation. After fixing the corners, simply push the sealing strip along the door edge into place. 4. Reattach the trim panel. After ensuring the sealing strip is fully secured and tightly fitted to the door, finally, just reattach the trim panel. Note: When installing the trim panel, ensure that the clip positions are fully secured. If loose, it may cause abnormal noises while driving.
1
5
Share

What materials are required for the 6-year exemption inspection of company vehicles?

The documents required for the 6-year exemption inspection of vehicles are as follows: vehicle license, ID card. Handle any traffic violations and clear all fines. Insurance policy for compulsory traffic insurance issued by the insurance company. Preparations for the annual inspection: 1. Dim lights or modified xenon headlights may cause your annual inspection to fail. During the inspection, the vehicle management office will check the vehicle's lights. If the lights are found to be too dim or too bright, the vehicle will be deemed unqualified and will not pass the inspection. Therefore, it is necessary to check the vehicle's lights in advance. If the lights are too dim, check the wiring and bulbs for aging and replace them if necessary. If xenon headlights have been installed, it is recommended to restore the original headlights before the inspection to pass the test. 2. Ensure the vehicle's braking performance is good; replace brake pads if needed. The braking performance is one of the most important safety indicators of a vehicle and is a mandatory inspection item. Therefore, the braking system should be checked in advance. Brake fluid and brake pads are the two key areas of focus. Dirty brake fluid or high water content can cause soft braking, while excessively worn brake pads can lead to reduced braking force and noise. After inspection, perform necessary maintenance to ensure the vehicle passes the annual inspection. 3. Handle any traffic violation records before the annual inspection. Unresolved traffic violations will affect the inspection's outcome. Check for any traffic violations before the inspection and pay any fines promptly. Traffic violation fines can be paid at banks that handle such transactions. 4. Renew insurance before the annual inspection. The annual inspection is based on the vehicle's registration date, which often coincides with the insurance expiration date. If the insurance policy is due to expire within 15 days, renew it before the inspection. Documents required for obtaining the inspection pass mark: "Motor Vehicle License Application Form," "Motor Vehicle Inspection Record," and "Motor Vehicle Safety Technical Inspection Certificate." For company vehicles, bring the company seal and a letter of authorization, and the agent should present their original ID card.
15
3
Share

Why is the fuel measurement system for cylinder bank 1 too rich?

Causes of an overly rich fuel measurement system in cylinder bank 1: An overly rich air-fuel mixture, commonly referred to as too much fuel and too little air, can be caused by the following common faults: 1. Faulty charcoal canister solenoid valve, charcoal canister, or fuel vapor lines. 2. Gasoline leakage from the high-pressure fuel pump into the crankcase. 3. Incorrect installation of the fuel filter (400kPa installed as 600kPa). 4. Faulty fuel injectors. 5. Restricted airflow due to a clogged air filter or faulty intake lines. 6. Incorrect load signals caused by faulty sensor readings. 7. Excessive carbon buildup in the combustion chamber. 8. Faulty oxygen sensor. 9. Internal ECU malfunction. 10. Other faults. Check the intake air flow sensor, coolant temperature sensor, and oxygen sensor signals for normal operation. Also, verify that the fuel pump pressure is within the standard range and inspect the fuel injectors for leaks. If any faults are found, repair them promptly.
18
5
Share

What is the displacement of the Bora?

The new Bora comes with two displacement options: 1.6L and 1.4T. Here is more information about the Bora: 1. The new Bora is equipped with two engines, one is a 1.5L naturally aspirated engine, and the other is a 1.4L turbocharged engine. The 1.5L naturally aspirated engine has the model code EA211-DMB, with a maximum power of 83kW, maximum torque of 145Nm, maximum power speed of 6000 rpm, and maximum torque speed of 3900 rpm. 2. The Bora is a classic model under Volkswagen. The interior of the new Bora draws inspiration from the high-end model Magotan, featuring a simple and symmetrical design style that highlights a stable and elegant atmosphere. 3. In terms of configuration, the top-tier model is still equipped with a 1.4TSI engine paired with a DSG transmission.
5
1
Share

Is It Safe to Store Gasoline in Iron Drums During Summer?

It is not safe. Below are precautions for storing gasoline: 1. It is best to use metal containers for gasoline storage: The lid must be tightly screwed to prevent gasoline molecules from escaping. The gasoline drum should be placed in a cool, well-ventilated area away from fire, electricity, and heat sources, and where it is not easily knocked over. Never place it in living rooms, kitchens, corridors, or wooden staircases. 2. If you suddenly smell gasoline at home: Conduct an inspection immediately, but never use an open flame for illumination. If you find a gasoline storage container is cracked or leaking, replace it promptly. Welding is strictly prohibited as it can easily cause an explosion. 3. If a gasoline storage container is knocked over: If a large amount of gasoline spills indoors, evacuate all household members quickly and immediately extinguish all ignition sources indoors and outdoors. Do not turn on lights or operate electrical switches, as the resulting sparks can cause gasoline to ignite. Also, open windows and doors for ventilation. 4. Gasoline storage containers: Do not fill them completely; leave at least 5% of the container's volume empty to allow gasoline molecules room to "move," as gasoline expands when heated, which can force the container to "bulge" or even rupture. 5. When using iron or fiberglass containers for storage: Ensure they are tightly sealed. Avoid plastic containers, as they can generate static electricity. Store in a cool place, and do not store too much gasoline for too long, as it can deteriorate. Keeping gasoline fresh is beneficial for the engine. 6. Empty gasoline drums: If they are no longer used for gasoline, they must be processed. Residual gasoline in the drum can easily volatilize and explode if exposed to fire. Therefore, before any heat processing, fill the drum with water and empty it repeatedly to wash away the gasoline.
19
3
Share

How to Use Geely's Cruise Control?

Specific steps for using Geely's cruise control: 1. Activate the speed cruise system by setting the sliding switch to the "ON" position. 2. Set the cruise speed After the system is activated, press the "SET" button when the desired speed is reached, and the car will maintain this speed continuously. Below is more information about using cruise control: 1. After setting the cruise speed, you can still accelerate using the accelerator pedal as usual. When the accelerator pedal is released, the system will restore the speed to the set cruise speed; if the speed exceeds the cruise speed by more than 10km/h and maintains this speed for more than 5 minutes, the cruise speed must be reset. 2. To decrease the cruise speed, press the "SET" button, and the speed will decrease by 1.5km/h; if the button is held down, the car will continue to decrease speed. Once the button is released, the current driving speed will be stored in the memory.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.