How often should a China V diesel vehicle clean its muffler?

2 Answers
PeytonRose
07/23/25 11:27pm
There is no time limit for cleaning the muffler of a China V diesel vehicle, but it needs to be cleaned regularly. Owners can clean it together when washing the car. China V generally refers to the National Phase V Motor Vehicle Pollutant Emission Standard, and its control level is equivalent to the European Phase 5 emission standard. The car muffler is a component used to reduce the noise generated by the engine when the motor vehicle is working. Since the length difference between the two pipes is equal to half the wavelength of the sound wave emitted by the car, the two sound waves interfere and cancel each other out when superimposed, weakening the sound intensity, reducing the sound, and thus achieving the effect of noise reduction.
Was this review help?
15
1
Share
OBrayden
08/10/25 7:18pm
I previously drove a China V diesel vehicle, and the excessive carbon buildup in the muffler was due to incomplete diesel combustion, which was worse in congested urban traffic conditions. My recommendation is to inspect it every 30,000 kilometers or so. If you mostly drive at low speeds with frequent idling, it's best to shorten the interval to cleaning every 20,000 kilometers. The cleaning method usually involves removing it and rinsing with water or using specialized chemical agents to avoid blockages that could affect exhaust emissions. Regular maintenance can extend the exhaust pipe's lifespan and prevent increased noise or higher fuel consumption. Overall, pay more attention to driving habits and don't wait until problems arise to take action.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

Must the second retake of Subject 1 be conducted on the same day?

Subject 1 exam does not allow the second retake opportunity on the same day; you must reschedule it through the "Traffic Management 12123" APP. The total duration of the Subject 1 exam is 45 minutes. The test paper consists of 100 questions, including true/false and single-choice questions, with a full score of 100 and a passing score of 90. The test paper is randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations". Subject 1 exam process: Follow the staff's arrangements and receive your driving training file in order in the waiting area; Carry and present your ID card for inspection by the supervising officer; Mobile phones must be turned off upon entering the exam area; No loud noises are allowed in the exam area; Regulation textbooks are not allowed in the exam area (or should be placed in your bag); After the exam, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the exam room; Candidates who pass the exam should sign under the guidance of the staff at the exit before leaving; Candidates who fail the exam can leave the exam room and wait for their driving school to notify them of the retake time.
20
0
Share

Which gear should be used for oncoming traffic in Subject 3?

For oncoming traffic in Subject 3, either 2nd or 3rd gear can be used, depending on the vehicle speed. Precautions for oncoming traffic and gear shifting methods are as follows: Precautions for oncoming traffic: Pay attention to traffic signals and signs during oncoming traffic; in situations with unclear visibility, reduce speed in advance and drive with low beams; avoid using emergency braking, suddenly releasing the accelerator, or jerking the steering wheel during oncoming traffic; avoid oncoming traffic near obstacles; avoid oncoming traffic in narrow bridges, narrow roads, tunnels, sharp turns, and other complex locations; avoid not turning off high beams during nighttime oncoming traffic. Gear shifting in Subject 3: Start in 1st gear; the gear shifting sequence is 1-2-3-4-2; use 1st gear for U-turns; stop and wait at traffic lights in 1st gear; normally drive in 2nd gear; maintain 2nd gear for straight-line driving; use 2nd gear for both overtaking and lane changes; shift to 1st gear to slow down and stop before pulling over.
10
0
Share

Does canceling the appointment three times for Subject 3 affect the test?

Subject 3 canceling the appointment three times does not affect the test. The relevant content about canceling Subject 3 is as follows: Methods to cancel Subject 3: To cancel the test appointment at the vehicle management office, you need to bring your original ID card and a copy, and write on the blank space of the ID card copy that you voluntarily cancel the Subject test at the driving school on a certain date, and sign your name, contact information, and date in the blank space. In addition to canceling at the vehicle management office, you can also cancel the driving test appointment on your mobile phone or the internet. If you have only successfully submitted the appointment application, you can cancel the appointment on the traffic management website by following the prompts. If you have already received a text message from the vehicle management office notifying the successful appointment date, you can only cancel the appointment at the vehicle management office, and you must go there at least one day in advance. Limitations on canceling the test: The driving test center information platform only allows cancellation of Subject 3 appointments, and the latest time to cancel is before 12 noon the day before the scheduled test date. For Subject 1, Subject 2, and the safety civilization test, students must cancel on the official appointment website of the driving test center or contact their driving school to cancel.
11
3
Share

What is the passing score for Subject 3?

Subject 3 requires a passing score of 90 points. Below are the key points to note for the Subject 3 test: Preparation before starting: Candidates must follow the safety officer's instructions to approach the vehicle, walk around it (from the left front door to the rear), and confirm safety before opening the door to enter. After entering, upon hearing the voice prompt "Please prepare for the test and perform fingerprint verification," first adjust the seat to a comfortable position, adjust the interior and exterior rearview mirrors, and fasten the seat belt. Then proceed with fingerprint verification. The fingerprint scanner is located below the left air vent on the steering wheel. Night driving: After successful fingerprint verification, daytime test candidates will hear the voice prompt "Now begins the simulation of nighttime light usage, please follow the voice prompts to operate" before starting. Candidates should then begin the light operation. The nighttime light simulation test will randomly select three items from the following for examination.
12
1
Share

Why can't the tricycle shift gears?

For clutches equipped with pneumatic or hydraulic boosters, if the clutch pedal feels heavy, it indicates poor performance of the booster system. Possible causes include air leaks in the pipeline system, wear of the cylinder piston seals, or poor sealing of the exhaust valve, which weaken the booster effect. The details are as follows: Reason 1: Slippage in hydraulically operated clutches is often due to insufficient free travel of the clutch pedal, causing the release bearing to press against the release lever or diaphragm and rotate with it. Adjust the return position of the clutch pedal and the length of the master cylinder push rod. Reason 2: Loose fit of the gear lever limit pin. Synchronizer damage or failure, excessive damping spring force, or prolonged vehicle inactivity can lead to severe rusting of the shift block, shift linkage, shift pin shaft, transmission differential, shift pin, and pivot bolt due to lack of lubrication.
17
5
Share

How many hours are required for Subject 2 check-in?

Subject 2 requires a daily check-in of 2 hours. The total check-in duration and related details for Subject 2 are as follows: Total check-in duration for Subject 2: You must complete 16 hours of study for Subject 2 before you can schedule the exam. However, daily practice check-in time cannot exceed 2 hours, so the study period will be five and a half days. After completing the required hours, you can schedule the exam. Therefore, the fastest possible time is seven days. Relevant regulations: Each study hour lasts 60 minutes, with effective teaching time being no less than 45 minutes. Daily theory and in-car practice cannot exceed 4 hours each. According to requirements, each subject must complete the stipulated study hours, be reviewed and approved by the road transport management department, and then transmitted to the public security traffic management internet service platform before the student can schedule the exam. Subject 2 test items: The C1/C2 driving test items include five mandatory components: reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.