How much fuel does a 2.0T engine consume when idling for one hour?

1 Answers
Giselle
07/29/25 5:12pm
On average, it may consume around 1.6 liters. The higher the engine displacement, the more fuel is consumed per hour during idling. Here is some information about idling: 1. Definition: Idling refers to the operation of the engine without any load, where it only needs to overcome the internal friction resistance of its own components and does not output power externally. The minimum speed required to maintain stable engine operation is called idle speed, which is one of the five basic operating conditions of an engine. When adjusting the idle speed, the speed should not fluctuate abruptly, as this can cause premature wear to the engine. 2. Impact: Fuel consumption. The engine can accumulate carbon deposits. Prolonged idling can lead to excessive carbon buildup in the engine, resulting in insufficient power during driving and, in severe cases, black smoke from the exhaust pipe.
Was this review help?
12
3
Share
More Forum Discussions

What Causes the Sunroof Leakage in the Envision?

The following are specific reasons for sunroof leakage: Clogged sunroof drainage outlets: Blocked drainage outlets prevent rainwater from flowing smoothly, gradually seeping into the vehicle interior. This phenomenon mainly occurs when owners neglect regular roof cleaning, allowing debris to wash into the drainage outlets with rainwater, causing blockages. To resolve this issue, you can use a wire hook to remove debris from the drainage holes or visit a repair shop to have the debris blown out with an air gun. Damaged sunroof sealing strips: Sunroof seals are made of rubber and can deteriorate over time. Repeated friction from the sunroof glass may cause wear, leading to poor sealing and leakage during rain. To prevent this, regularly inspect the condition of the seals and replace them promptly if damaged. Choose high-performance, aging-resistant sealing strips. Roof deformation: If the vehicle suffers an impact, the body may deform. If repairs are not performed to the original standards, improper sealing can result in leaks. During accident vehicle repairs, strict adherence to the original specifications is essential to prevent mismatched parts and potential leakage hazards.
1
0
Share

What is the battery model for the Peugeot 308?

The Peugeot 308 is equipped with an L2-400 type battery, with a voltage of 12.6V and a capacity of 60AH. Here is an introduction to the Peugeot 308: Interior: Apart from a few familiar elements like the steering wheel and audio controls, everything else features a completely new design. The entire dashboard is positioned more vertically than before to create a sense of space in the cockpit. The instrument panel in front of the steering wheel has been redesigned to look more beautiful and stylish, especially the creative instrument pointers. Powertrain: The entry-level model comes with a 1.4-liter VTi engine, producing 95 horsepower and 136N·m of torque. The 1.6-liter VTi engine delivers 120 horsepower and 160N·m of torque, with an average fuel consumption of 6.7 liters per 100 kilometers and a top speed of 195km/h.
13
1
Share

What is the normal oil pressure range for Yuchai engines?

Yuchai engine oil pressure is generally within the normal range of 3-5 units. Below is an introduction to related content: 1. Oil pressure range: The normal oil pressure for gasoline engines is generally 1.5-3.5 units, while for diesel engines, an oil pressure of 3 to 5 units is within the normal range, with idle pressure around 1 unit. 2. Model differentiation: The oil pressure for diesel and gasoline engines varies by specific model, so the above data is only an estimate. Below is extended information on diesel engine-related content: 1. Reasons for diesel engine oil light illumination: Excessive clearance in various parts of the engine. Low oil level in the oil pan, oil leakage. Crankshaft oil seal damage. Engine water temperature too high. Engine idle speed too low. 2. Oil change: The oil used does not meet requirements, with viscosity too low. As engine operating time increases, the oil becomes contaminated due to factors such as high-temperature oxidation, wear particles from mechanical parts, and fuel vapor corrosion.
12
3
Share

How is the quality of the Geely Binyue 6-speed wet dual-clutch transmission?

Geely Binyue is equipped with a 6-speed wet dual-clutch transmission. The design and operation logic of the electronic gear lever are quite futuristic, and the sports version comes with paddle shifters. The chassis adopts a front MacPherson and rear torsion beam suspension structure. This dual-clutch transmission is jointly developed and produced by Volvo and Geely, offering excellent actual handling feel. Additional information: Introduction to Binyue: As a compact SUV under Geely, the vehicle's transmission uses a 7-speed wet dual-clutch transmission, which was jointly developed and produced by Geely Auto and Volvo Car Group, belonging to the independently launched transmission type by Geely. Introduction to transmissions: A transmission consists of a gear transmission mechanism and a control mechanism. It has evolved from manual transmissions in the past to continuously variable transmissions today, enabling the engine to consume less fuel while operating at higher power levels. The transmission can change the car's rotational speed, expanding the driving wheel's torque and speed range.
12
3
Share

How to Deal with Inner Wear on Front Tires?

Adjust the tire pressure and always ensure it is at the normal level. It is best to inflate the tires according to the specified tire pressure marked on the door frame. Regularly perform wheel dynamic balance tests on the tires. If imbalance is detected, balance lead weights should be added. Pay attention to tire maintenance and rotation. After driving 5,000 kilometers, it is advisable to rotate the tires, preferably in a diagonal pattern, to ensure even wear and prolong their lifespan. Here is additional information: Tire rotation: Full-size spare tire. Rotate the tires every 5,000 kilometers, and perform dynamic balancing each time. The five-tire counterclockwise rotation method can be used. For the first rotation, replace the spare tire to the right front position, move the original right front tire to the spare position, move the right rear to the left front, the left front to the left rear, and the left rear to the right rear. The second rotation follows the same pattern. After driving 40,000 kilometers, if the tread patterns are consistent, this method can continue to be used. If one tread appears slightly shallower, it can be used as the spare tire, while the others continue the rotation cycle.
15
5
Share

Should Vehicles Be Parked Underground or Above Ground During Heavy Rain?

Above ground. Additional information is as follows: 1. Choose a high and open area: During heavy rain, it is recommended to park the vehicle above ground rather than in an underground parking lot, preferably in a high and open location. 2. It is advisable to cover the vehicle with a car cover: When parked outside during heavy rain, the car's paint surface can be corroded by rainwater, leading to water marks, oxidation, or even cracking. Rainwater can also seep into the seams of the vehicle body, causing metal parts to rust and corrode. 3. Be cautious of slippery roads after heavy rain: Wet and slippery roads require careful driving during rainy days, but one should also remain vigilant in underground parking lots, as vehicles entering from outside can bring in rainwater and make the ground wet.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.