···
Log in / Register

How much does the BYD F3 weigh?

3 Answers
DeEmma
09/03/25 7:25am
The curb weight of the BYD F3 is 1,200 kilograms. Below is the relevant introduction: Positioning: The BYD F3 is an A+ class passenger car produced by BYD Auto. The design philosophy of the F3 draws on the successful experience and models of Japanese and Korean car development. The "MM" design concept runs through the entire design of the F3. Power: The F3 is equipped with a Mitsubishi 4G18 engine, paired with a 5-speed manual transmission. This is a relatively mature engine, known for its fuel efficiency, and is also used in models such as the Hafei Saibao, Saibao, and Dongfeng Lingshuai, with only slight differences in the specific numerical values of the engine's external characteristics. BYD's promotional points for this engine also focus on low fuel consumption and practicality.
Was this review help?
16
3
Share
McAlexander
09/16/25 2:01am
I drove a BYD F3 for quite some time, with a curb weight of around 1100 kg, which is quite lightweight. In city driving, the light body provided an advantage in agile steering, but it felt a bit floaty on highways during strong winds, requiring slowing down for stability. In terms of fuel consumption, I measured about 7 liters per 100 km in the city and slightly over 6 liters on highways, which is more economical than some heavier cars, but the full-tank range isn’t particularly long. During routine maintenance, lifting the car to inspect the undercarriage wasn’t difficult, making it user-friendly for female owners. However, be cautious when loading heavy items in the trunk to avoid overloading, which could affect braking. It’s advisable to pay extra attention to tire wear, as the light body can accelerate tread loss. Regular maintenance can help extend its lifespan.
Was this review help?
2
5
Share
Expand All
KatherineLynn
10/30/25 2:34am
As an experienced driver, I've compared the weight variations across different model years of the BYD F3. For instance, the 2010 model weighed around 1,050 kg, the 2015 version increased to 1,120 kg, while recent models have undergone lightweight optimization to approximately 1,100 kg. These differences impact driving dynamics: lighter versions offer quicker acceleration but slightly reduced high-speed cornering stability; heavier ones feel more planted with shorter braking distances. In terms of fuel consumption, my older model averaged 8L/100km in city driving, while the newer version dropped to 7L/100km, showing significant fuel efficiency improvements. If purchasing a used car, opting for lightweight models can save costs, but always verify specifications in the manual rather than relying solely on seller claims.
Was this review help?
3
4
Share
Expand All
More Forum Discussions

How Many Cylinders Does the Envision Engine Have?

Envision is equipped with a four-cylinder engine. Below is relevant information about the Envision and its engine: 1. The powertrain is one of the Envision's strengths, with its 2.0T turbocharged engine delivering a maximum horsepower of 260 PS and a peak torque of 400 N·m, giving it a competitive edge among vehicles in the same class. 2. A four-cylinder engine, also known as a four-cylinder powerplant, is a machine capable of converting one form of energy into another more useful form, typically transforming chemical energy into mechanical energy. Sometimes, the term "engine" can refer to both the power-generating device and the entire machine that includes the power unit, such as gasoline engines or aircraft engines. The main component of an engine is the cylinder, which serves as the primary source of power for the entire vehicle. A four-cylinder engine's structure mainly consists of the cylinder block, crankcase, cylinder head, and cylinder gasket, among other parts.
1
5
Share

What material is the BMW frame made of?

BMW uses a steel-aluminum hybrid body, which better achieves the weight distribution between the upper and lower parts of the vehicle, providing consumers with value in terms of safety, handling, comfort, and more. The steel-aluminum hybrid body effectively retains the lightweight characteristics of an all-aluminum body while balancing the production costs and future maintenance costs of an all-aluminum body, making the body structure safer. Brand: BMW is a German luxury car brand, founded in 1916 and headquartered in Munich, Bavaria, Germany. Logo: The blue and white logo of BMW represents the colors of the Bavarian state flag, where BMW's headquarters is located. Over the past century, BMW has evolved from an aircraft engine manufacturer into a corporate group that focuses on premium cars and also produces aircraft engines, off-road vehicles, and motorcycles.
15
3
Share

What are the steps to renew a driver's license online?

Go to the designated hospital's physical examination center for a check-up. After the examination, the hospital will immediately upload and submit the proof to the traffic management system and provide a paper copy of the physical examination certificate. Open the Traffic Management 12123 app, click on the 'Renew Expired Driver's License' option on the homepage to enter the renewal application process, and agree to the notice. Choose the method of receiving the new driver's license: mail or self-pickup. Generally, if you choose mail, you will need to pay for postage, which is usually on delivery. If you choose self-pickup, the pickup address will be provided. After confirming the pickup method, proceed to the submission interface. A verification code will be sent to your mobile phone at this time. Verify the information again and submit if everything is correct.
8
5
Share

How to Replace the Battery in a Magotan?

Method for replacing the battery in a Magotan: Prepare tweezers and a new battery. Use tweezers or a blade to pry open the gap on the side, remove the old battery, and insert the new one. Be careful when prying to avoid scratching the remote control casing. Below is a detailed introduction to the battery replacement method for the Magotan: 1. Pull the front hood release lever located below the driver's side, then open the hood to locate the battery. 2. Remove the protective cover of the battery terminal and the nut of the fixing bracket. 3. First disconnect the negative terminal, then remove the positive terminal. This is to prevent short circuits, as the negative terminal is connected to the vehicle body. 4. After removing the surrounding fixtures and the positive and negative cables, the battery can be taken out for replacement. (Note: The electrolyte from the old battery can easily leak, so do not tilt it more than 40° when removing it.)
19
0
Share

How long is the wheelbase of the BMW M8?

The wheelbase of the BMW M8 is 2827 millimeters. This is a coupe, with dimensions of 4873 millimeters in length, 1912 millimeters in width, and 1381 millimeters in height. Here is some relevant information about the BMW M8: 1. The BMW M8 is a model from BMW's M Power series, and this car has very powerful performance. The BMW M8 is equipped with a 4.4-liter twin-turbocharged V8 engine across the entire lineup. The standard version of the engine delivers 600 horsepower and a maximum torque of 750 Newton-meters. This engine can output maximum power at 6000 revolutions per minute and maximum torque between 1800 and 5860 revolutions per minute. 2. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with an 8-speed automatic transmission.
20
5
Share

How many kilometers should a new car run before its first maintenance?

According to different car models, manufacturers will specify different maintenance intervals, generally most are 3,000 or 5,000 kilometers. The following is the relevant introduction: 1. The first maintenance of a car usually involves changing the engine oil and oil filter. Check the working condition of the engine, such as whether all pipe connections are normal, whether there are any leakage points, whether the engine sound is normal, and whether there are any abnormal noises. 2. Check the degree of wear on the brake pads and tires, and after lifting the vehicle, check whether there is any deformation or damage to the chassis caused by collisions. 3. The purpose of changing the engine oil is to ensure better lubrication for the engine, because after a period of use, the lubrication effect of the oil will deteriorate, so it needs to be replaced.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.