How many WEY Tank 300 units have been delivered?

2 Answers
MacElle
08/29/25 3:12am
Tank 300 has delivered over 6,000 units in a single month. Below are the relevant details: Introduction: The WEY Tank 300 is a compact SUV. This model measures 4760mm in length, 1930mm in width, and 1927mm in height, with a wheelbase of 2750mm. The WEY Tank 300 is a five-door, five-seater SUV. Configuration: The WEY Tank 300 series is primarily equipped with a 2.0-liter turbocharged four-cylinder engine. The 2.0-liter turbocharged engine of the WEY Tank 300 delivers 227 horsepower and a maximum torque of 387 Nm. This engine reaches its maximum power at 5500 rpm and its maximum torque between 1800 and 3600 rpm. The engine features direct fuel injection technology and utilizes an aluminum cylinder head with a cast iron cylinder block.
Was this review help?
3
5
Share
Harrison
09/10/25 7:53am
When I ordered the Tank 300, I realized its delivery volume was enormous—it sold over 60,000 units last year alone, and the cumulative sales must have exceeded 100,000 by now. I waited nearly three months for the car because it's so popular, thanks to its strong off-road performance and affordable price, which made it highly sought-after. The manufacturer has been working hard to expand production capacity, but it still can't keep up with demand, leading to long delivery times. Other SUVs like the Haval Big Dog are also good, but the Tank 300 has more appeal. Remember to book in advance and be patient—good cars are worth the wait, and its safety and durability are solid.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

Where is the fuel filler switch located on the Volkswagen Tiguan?

Volkswagen Tiguan does not have a physical fuel filler switch and requires the use of a remote key. Below is the method for refueling the Volkswagen Tiguan as well as an introduction to the fuel filler switch locations on other vehicle models: Method for refueling the Volkswagen Tiguan: First, unlock the vehicle by pressing the unlock button on the key. Then press the vehicle's fuel filler flap to pop open the outer cover, revealing the fuel filler port. The location of the fuel filler port can also be seen on the instrument panel, with its direction indicated by the arrow on the fuel gauge. Fuel filler switch locations on other vehicle models: For models equipped with a physical fuel filler switch, the switch is typically located below the steering wheel on the driver's side, near the driver's left knee, and is marked with a fuel filler flap symbol.
6
5
Share

What Are the Reasons for Connected Car Bluetooth But No Sound?

Connected car Bluetooth but no sound could be due to the phone being on silent mode or the volume being set to zero. It might also be because the car's navigation system has no sound or the volume is too low to hear. Additionally, some car Bluetooth systems may continue playing the last media audio source if the car is not on the Bluetooth media audio playback interface, resulting in no sound when playing music. Here are the specific reasons: 1. Volume: The volume on the car navigation system or phone is not turned on. 2. Signal interference: The media audio on the phone is not turned off, causing signal interference with the Bluetooth function.
7
3
Share

What is the standard tire pressure range for the GS4?

The normal tire pressure range for the Trumpchi GS4 is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and decreased by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. Method to check the tire pressure of the Trumpchi GS4: Press the set button on the dashboard to bring up the tire pressure monitoring system. The tire pressure monitoring system is a type of active safety device that can alert the driver in time when there are signs of danger in the tires, prompting the driver to take appropriate measures, thereby avoiding serious accidents. Generally speaking, a tire pressure exceeding 2.8 bar is considered too high, and a tire pressure below 2.0 bar is considered too low. Hazards of excessive tire pressure: The friction and adhesion of the tires will decrease, affecting braking performance; it can cause steering wheel vibration and deviation, reducing driving comfort; it accelerates localized wear of the tread pattern in the center of the tire, shortening the tire's lifespan; it increases vehicle vibration, indirectly affecting the lifespan of other components; it causes excessive stretching and deformation of the tire cords, reducing the elasticity of the tire body, and increasing the load on the vehicle while driving. Hazards of insufficient tire pressure: The friction coefficient with the road surface increases, leading to higher fuel consumption; it makes the steering wheel heavy and prone to deviation, among other factors detrimental to driving safety; it increases the movement of various parts of the tire, causing abnormal heating due to excessive rolling; it reduces the functionality of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, causing damage to the bead area and abnormal wear; the friction between the tire and the ground multiplies, causing a sharp rise in tire temperature, softening the tire, and drastically reducing its strength. High-speed driving under these conditions may lead to a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol, an irregular circle with no stamp on top and four small spikes at the bottom, with an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Generally, an alarm will sound if the pressure is below 1.8 bar or above 3.0 bar. At this point, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator light to come on. At this point, simply reset the tire pressure. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the sensor is damaged due to impact while driving, it will also cause the tire pressure warning light to come on. For sensor damage issues, only a complete replacement of the part will suffice.
7
4
Share

What are the reasons for the failure of one-key start in Lynk & Co 01?

The reasons for the failure of one-key start in Lynk & Co 01 include insufficient battery power to support vehicle startup, non-functioning fuel injectors, non-functioning spark plugs, clogged intake system, or damage to the remote key or ignition switch, causing the vehicle to remain in anti-theft lock mode. Solutions for the failure of one-key start in Lynk & Co 01: If the vehicle fails to start during normal use, the battery should be checked first. If the battery is functioning properly, a systematic inspection of the ignition system and fuel system should be conducted to identify the specific cause of the failure, followed by targeted repairs. The correct starting method is: Shift the gear lever to P position and fully depress the brake pedal. Briefly press the START/STOP ENGINE button and release it. The automatic start-stop function controls the starter motor to operate until the vehicle starts.
12
0
Share

What is the ground clearance of the Lynk & Co 02?

The minimum ground clearance of the Lynk & Co 02 is 201mm. Definition of minimum ground clearance: Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to indicate the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. Relationship between ground clearance and vehicle passability: The smaller the ground clearance, the worse the ability to overcome obstacles. Sedans typically travel on flat urban roads, so they generally have smaller ground clearance. Off-road vehicles have larger minimum ground clearance to allow them to pass over larger obstacles.
9
2
Share

What is the Function of the Steering System?

Automobile steering gears are also academically known as steering machines or directional machines, serving as one of the most crucial components among all vehicle parts. Their primary functions are to amplify the force of the steering wheel's steering transmission mechanism and alter the direction of force transmission. More detailed explanations are as follows: 1. Function of the steering gear: Early automobiles had no power-assisted steering, relying solely on the driver's physical strength as the power source for steering. With technological advancements, driving has become increasingly simple and convenient. After evolving through mechanical hydraulic steering, electro-hydraulic steering, and electric power steering systems, the automotive steering system now presents a coexistence of these three modes. The steering gear's role is to appropriately modify the steering torque and angle from the steering wheel (primarily by reducing speed and increasing torque) before transmitting it to the steering linkage, thereby enabling vehicle steering. Essentially, the steering gear is a speed-reducing transmission device, typically equipped with 1-2 stages of speed-reducing transmission pairs. 2. Structure and principle of the steering gear: The rack-and-pinion steering gear is the most common type. Its basic structure consists of a pair of meshing pinion and rack. When the steering shaft drives the pinion to rotate, the rack moves linearly. In some cases, the rack directly drives the tie rod to steer the wheels. To dampen steering wheel shimmy, steering shock absorbers are often added to steering systems with rack-and-pinion steering gears.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.