How many types of phone holders are there for cars?

1 Answers
VanEverett
07/29/25 9:48pm
Currently, phone holders are mainly divided into two types: one is a suction ring that sticks to the back of the phone, and the other is a holder used to place the phone on top. Specific details are as follows: 1. Back suction ring: To use, simply stick the suction ring to the back of the phone, then extend the ring to place the phone. 2. Holder: Just open the phone holder to a 45-degree angle and place the phone on it for use. 3. Convenient phone holder: This is a silicone phone holder, perfect for daily use when watching TV/movies—just place it down. The middle features an elastic steel plate that can be folded and unfolded multiple times, offering both aesthetics and a comfortable feel.
Was this review help?
19
4
Share
More Forum Discussions

Is the Qoros 5 manual or automatic?

The Qoros 5 comes with a 7-speed manual transmission and a 7-speed dual-clutch transmission, not an automatic transmission. The new Qoros SUV model is named "Qoros 5". The interior of the new car adopts an overall black color scheme, with the center console layout and steering wheel design continuing the Qoros family-style design. The Qoros 5 is not an automatic transmission. It is equipped with a 6-speed manual transmission and a dual-clutch transmission. Below are some related introductions to the Qoros 5: 1. The embedded center console screen in the Qoros 5S comes with the Banma Zhixing vehicle system, providing OTA over-the-air upgrades, intelligent voice control, and remote control via smartphone. 2. It is powered by a 1.6T turbocharged engine that delivers a maximum power output of 145kW (197PS) and a peak torque of 290N·m. 3. The Qoros 5 has dimensions of 4587/1869/1676mm in length, width, and height, with a wheelbase of 2697mm and a minimum ground clearance of 180mm, positioning it as a mid-size urban SUV. The luggage compartment space is 450L, which can be expanded to 1500L when the rear seats are folded down.
14
1
Share

How to Make the Heavy Steering Wheel of Swift Lighter?

The Swift's steering wheel uses electronic power steering. If it becomes heavy, you can check whether the fuse is burnt out, if there are any open circuits or ground short circuits in the wiring. After inspecting and adjusting any problematic items, the issue of a heavy steering wheel can be resolved. There are several reasons why a car's steering wheel may become heavy: 1. For hydraulic power steering, check if the power steering fluid is low or if there is any leakage. If the fluid is low, it needs to be replenished to the normal range. If the fluid level is adequate, check if the power steering pump belt is too loose. If it is too loose, tighten the belt. Also, check if the fluid is too dirty, which can reduce its flowability. Generally, the fluid should be replaced every 2 years or 60,000 kilometers. 2. For electronic power steering, check if the fuse is burnt out or if there are any open circuits or ground short circuits in the wiring. 3. Check the tire pressure. A leak can also cause the steering to become heavy, so inflate the tires if necessary. 4. If there is excessive play in the front suspension system, inspect and replace the lower control arm if needed. 5. If the steering ball joint is loose, inspect and replace the steering head after checking. 6. Changing the specifications of the front tires.
17
1
Share

What is the normal tire pressure for a Pajero?

The normal tire pressure range for a Pajero is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. The Mitsubishi Pajero is equipped with a tire pressure monitoring system. To check the tire pressure, first prepare a tire pressure gauge, locate the position of the factory tire pressure label, press the tire pressure gauge onto the tire valve to measure and read the value, and remember to replace the valve cap after checking the tire pressure. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: 1. Abnormal tire pressure. The system usually alerts when the pressure is below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. 2. The tire pressure monitoring system has not been reset. After inflating the tires, if the tire pressure reset is not performed promptly, the system may still record the previous data, causing the tire pressure monitoring indicator light to come on. Simply performing a tire pressure reset will resolve this issue. 3. The tire pressure sensor is damaged. The tire pressure sensor, which monitors the tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged while driving, it can also trigger the tire pressure warning light. If the sensor is damaged, the only solution is to replace it with a new one.
5
2
Share

How to Reset the Tire Pressure Warning on Volkswagen Bora?

Methods to reset the tire pressure warning on Volkswagen Bora: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the completion of the tire pressure reset. There are three commonly used tire pressure monitoring methods: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the tire pressure data for each tire. The system will automatically alert when the tire pressure is too low or there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in faster rotation compared to other wheels. By comparing the differences in rotation speeds between tires, the system monitors the tire pressure. Introduction to Tire Pressure Monitoring System (TPMS): This system combines the advantages of both the above systems. It is equipped with direct sensors in two diagonally opposite tires and an indirect system for all four wheels. Compared to using only a direct system, this hybrid system can reduce costs and overcome the limitation of indirect systems, which cannot detect simultaneous low pressure in multiple tires.
11
2
Share

Which model of antifreeze is used for Tourneo?

Tourneo uses original factory antifreeze. Antifreeze is a type of coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance such as preventing freezing in winter, boiling in summer, and protecting against scale and corrosion throughout the year. More details about antifreeze are as follows: 1. Each antifreeze manufacturer has its own brand and model identification, unlike engine oil which has relatively standardized model meanings. However, antifreeze will have certain clear markings, such as low-temperature (freezing point) or applicable low temperatures. 2. The quality of antifreeze is mainly measured by its freezing point and boiling point. Generally, ordinary antifreeze can reach -40°C, while high-quality antifreeze can reach around -60°C, which is an important indicator of antifreeze quality. Another factor is the boiling point of antifreeze. The boiling point of water is 100°C, while antifreeze should reach at least 108°C, with superior products reaching above 110°C. In other words, the lower the freezing point and the higher the boiling point, the greater the temperature difference, and the better the quality of the antifreeze. 3. Commonly used antifreeze functions include increasing the boiling point of cooling water, cooling the engine, preventing rust in the cooling system, preventing scale formation in cooling water, cleaning the cooling system, and preventing foam formation. Typically, if the liquid color in the reservoir appears faded upon visual inspection, it indicates that it's time for a replacement. 4. When using diluted antifreeze, once the engine temperature exceeds 80 degrees Celsius, water vapor will form on the cylinder walls. This water vapor has poor heat transfer properties and will gradually form a bubble layer around the metal of the cylinder, preventing the engine's heat from dissipating in time. Over time, this can lead to scale formation, corroding the cylinder block pipelines, radiator, and water pump.
3
5
Share

How many cylinders does the Chevrolet Orlando have?

Chevrolet Orlando has three cylinders, equipped with a 1.3T turbocharged engine. The maximum power output of the Orlando engine is 120 kW, with a peak torque of 230 Nm. In terms of the transmission system, it is paired with a 6-speed automatic manual transmission. The Chevrolet Orlando is a compact SUV launched by Chevrolet, adopting the brand's new-generation family design language and offering "multi-purpose functionality". Regarding body dimensions, the Chevrolet Orlando measures 4684mm in length, 1807mm in width, and 1627mm (1628mm) in height, with a wheelbase of 2796mm.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.