How many seconds does the Mondeo 1.5 take to accelerate from 0 to 100 km/h?

2 Answers
BethanyLynn
07/28/25 6:24pm
According to official data, the Mondeo 1.5T model accelerates from 0 to 100 km/h in 8.8 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in faster acceleration. For example, the BMW 320i has a maximum torque of 205 Nm and accelerates from 0 to 100 km/h in 9 seconds. The Mondeo 1.5T model has a torque of 243 Nm and accelerates from 0 to 100 km/h in 8.8 seconds. Transmission efficiency: The transmission acts as a medium for transferring power, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Mondeo 1.5T is equipped with a 6-speed automatic transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). The higher the power-to-weight ratio, the faster the acceleration. For example, the BMW 320i has a power-to-weight ratio of 106 Hp/T and accelerates from 0 to 100 km/h in 9 seconds. The Mondeo 1.5T has a power-to-weight ratio of 114 Hp/T and accelerates from 0 to 100 km/h in 8.8 seconds.
Was this review help?
13
3
Share
VonTyler
08/12/25 12:04am
I remember the Mondeo with a 1.5L turbocharged engine typically accelerates from 0-100 km/h in about 9.5 to 10 seconds, depending on the configuration and tuning. Driving it feels completely at ease, and it's more than sufficient for stop-and-go city traffic. When the light turns green, it starts smoothly without leaving you lagging behind the traffic. For daily commuting, the focus is on comfort and practicality. Although the engine has a small displacement, the power comes on quickly when you step on the throttle, with early turbo engagement making mid-range acceleration even more effortless. The fuel consumption is also quite economical, making long-distance driving stress-free. For safe driving, this level of acceleration helps avoid impulsive speeding. It's recommended to occasionally switch to sport mode for slightly faster gear shifts, though the basic timing doesn’t change much. The key is maintaining good vehicle condition, which ensures smoother acceleration.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

What Causes Abnormal Noise When Accelerating a Car?

Reasons for abnormal noise when accelerating a car: 1. Fuel pump motor noise: When internal wear or impurities exist in the fuel pump motor, abnormal noise occurs upon acceleration. This issue requires fuel pump replacement. 2. Throttle body noise: Modern throttle bodies use electronic control, with motors naturally controlling valve opening/closing. Gear wear in the motor causes insufficient engagement and noise. Excessive carbon deposits or sludge in the throttle body can also cause noise. Cleaning the throttle body may help, but motor damage requires throttle body disassembly and servo motor replacement. 3. Poor lubrication in accelerator pedal bearings: Apply grease to the bearings for lubrication. 4. Clutch release bearing damage causing incomplete clutch disc separation: Remove the clutch and replace the release bearing.
10
4
Share

What is the working condition table for XCMG 80l6?

The working condition table for XCMG 80l6 is the lifting performance table for the XCMG 80-ton crane's main boom, including boom length (with outriggers fully extended) and working radius (m) such as 12.0m, 2.5, 3.0, 3.5, etc. Classification of license plate colors: There are four background colors for vehicle license plates, namely blue, yellow, white, and black. National license plate standards: The size of license plates for large vehicles is front: 440*140 (same as small vehicles); rear: 440x220. According to the 'Motor Vehicle Registration Regulations', medium-sized buses, large buses, and urban buses have yellow license plates; medium-sized trucks, large and medium-sized trucks, and trailers also have yellow license plates. The type of vehicle is determined based on the vehicle's factory certification.
5
4
Share

How to Make a Proper U-turn with a Car?

To make a proper U-turn with a car, follow these steps: 1. Shift into P or N gear and activate the low-range four-wheel drive mode; 2. Change to D gear, engage the crawl mode, and release the brake; 3. Once the car is in automatic driving mode, turn the steering wheel to a certain angle and use the speed button to control the speed. Things to pay attention to when making a U-turn: 1. Check if the intersection allows U-turns; 2. Ensure there are no oncoming vehicles; 3. On wider roads, try to make a large loop for a single smooth U-turn. Intersections where U-turns are permitted include: 1. Intersections with U-turn signs; 2. Intersections without explicit no U-turn or no left-turn signs; 3. Areas with yellow grid lines.
20
2
Share

Where is the reversing radar switch on the 2021 Levin?

2021 Levin reversing radar switch is located on the lower left side of the driver's compartment, next to the headlight height adjustment with a letter "P" marked on it. Function of reversing radar: Accurately measures the distance between the rear of the car and the nearest obstacle; When reversing to the limit distance, it can emit a rapid warning sound to remind the driver to pay attention to braking; It can repeatedly emit voice warnings to remind pedestrians to pay attention. Working principle of reversing radar: When reversing, the Levin reversing radar uses the principle of ultrasound. The probe installed on the rear bumper sends ultrasonic waves to hit the obstacle and reflects the sound waves, calculates the actual distance between the car body and the obstacle, and prompts the driver to make parking or reversing easier and safer.
19
0
Share

What are the reasons for the air conditioning not cooling in a Hyundai Elantra?

The reasons for the air conditioning not cooling in a Hyundai Elantra are: 1. The compressor lacks refrigerant; 2. The compressor lacks oil; 3. Internal damage to the air conditioning pump; 4. Excessive refrigerant charge in the air conditioning system; 5. Blockage in the refrigerant pipeline; 6. Fault in the refrigeration system circuit; 7. Damage to the thermostat interface. The Hyundai Elantra is a compact 4-door 5-seater sedan with body dimensions of: length 4570mm, width 1775mm, height 1445mm, and a wheelbase of 2700mm. It is equipped with a 1.6L naturally aspirated engine and a 6-speed manual transmission, delivering a maximum power of 93.8 kW and a maximum torque of 156 Nm.
19
2
Share

Does the Sagitar support Huawei HiCar?

The Sagitar supports Huawei HiCar. How to use HiCar with your phone: Using HiCar requires both the phone and the in-car hardware device (original car screen, aftermarket car head unit, car smart screen, external module, etc.) to support HiCar. HiCar needs to connect to the screen of the in-car hardware device, using it as a second screen for the phone, and projects certain applications from the phone (such as maps, music, videos, etc.) onto this screen. It also utilizes other hardware devices of the in-car hardware equipment for input and output (buttons, microphone, speakers, etc.). How to check if your phone has HiCar functionality: Go to Settings - More connections, and if Huawei HiCar (or HiCar Smart Travel) is present, it is supported.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.