How many seats can a Class C driver's license drive?

3 Answers
DelLeila
07/29/25 8:48am
According to relevant regulations, a Class C license can drive cars and minivans with fewer than 9 seats, but not trucks. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the scope of a C1 driver's license includes small and micro passenger vehicles, as well as light and micro cargo vehicles; light, small, and micro special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer. Based on these standards, a C1 license cannot drive vehicles with more than 9 seats. Relevant information about driver's licenses is as follows: 1. Introduction: The People's Republic of China Motor Vehicle Driver's License, commonly referred to as a driver's license or "driver's permit," is a certification required by law for motor vehicle drivers in China. 2. Examination Content: The test subjects include three areas: traffic laws and related knowledge, field driving, and road driving (including safe and civilized driving).
Was this review help?
16
1
Share
CarterAnn
08/12/25 7:01am
As an experienced driver, I believe that a Class C driver's license generally allows driving vehicles with no more than 9 seats, including the driver. I remember when I first bought a car, I drove a 7-seater SUV which was quite convenient for family trips when fully loaded, but overloading is absolutely forbidden as it's extremely dangerous. Both C1 and C2 licenses basically qualify you to drive minibuses, sedans, and compact SUVs, with passenger capacity limits clearly specified in safety regulations. If you frequently transport large groups, you should consider upgrading your license; otherwise, you may face fines or penalty points. Years of driving experience have taught me that adhering to seating restrictions isn't just about obeying the law—it's about protecting lives. Before every trip, I always double-check passenger numbers to ensure absolute safety. This setup is simple and practical, perfectly suited for everyday family travel.
Was this review help?
9
1
Share
Expand All
NaomiMarie
10/05/25 8:37am
As a new driver who just got my license, I'm particularly concerned about how many seats a Class C license allows me to drive. The answer is vehicles with no more than 9 seats, such as family sedans or compact SUVs, but stay away from large buses or commercial vehicles. During my driving lessons, I was told: exceeding the limit could lead to accidents or penalties. In actual driving, I chose a 5-seat sedan, which is sufficient for carrying friends around. If you really want to try a vehicle with more seats, it's best to rent a 7-seat MPV, which is both safe and compliant. Remember, the license regulations are designed for the safety of you, me, and the passengers, so don't risk overloading. Enjoy the fun of driving safely!
Was this review help?
1
5
Share
Expand All
More Forum Discussions

What Causes the Starter Motor to Spin Without Engaging the Engine?

Starter Motor Spinning Without Engaging the Engine: Detailed Reasons Starter Carbon Brush Wear: The carbon brush is pressed against the rotor under the preload force of the spring, so at the moment of starting, a strong electric spark is generated at the contact point between the carbon brush and the rotor, causing the carbon brush to erode. When the starter carbon brush is severely worn, the symptom during startup is weak cranking, and the crankshaft can be seen turning very slowly through the belt and pulley. In cases of extreme wear, the starter motor cannot drive the crankshaft to rotate at all, producing only an abnormal current sound. Electromagnetic Control Mechanism Failure: The function of the electromagnetic control mechanism is to push the small pinion gear mounted on the starter motor rotor outward to engage with the large ring gear on the flywheel, thereby allowing the starter motor to rotate the flywheel. When the control mechanism fails, the small pinion gear cannot engage with the large ring gear, making it impossible to start the engine. The symptom is that when turning the key to start, only the sound of the starter motor spinning at high speed is heard, without the sound of the engine crankshaft or flywheel operating.
10
1
Share

What is the emission standard of the BMW 2 Series?

BMW 2 Series meets the China VI emission standard. Currently, all BMW 2 Series models available on the market are the 2019 version, fully compliant with the China VI vehicle emission standard. The BMW 2 Series is a 2-door, 4-seater sports car produced by BMW, available in both coupe and convertible versions. The entire BMW 2 Series lineup is equipped with a 2.0-liter turbocharged engine, featuring rear-wheel drive and an 8-speed automatic transmission. The dimensions of the BMW 2 Series are 4454mm in length, 1774mm in width, and 1408mm in height, with a wheelbase of 2690mm. The BMW 2 Series boasts a new multifunctional steering wheel and a center console design that better meets ergonomic needs. It also comes equipped with a 6.5-inch (optional 8.8-inch) iDrive system, collision warning system, built-in 3G network support, automatic speed limit detection, and other features.
5
1
Share

Does Converting to Gas Affect the Engine?

Converting to gas does affect the engine. After converting a vehicle from gasoline to gas, there are both advantages and disadvantages. The pros and cons of a gas-converted engine and its service life are as follows: Pros and cons of a gas-converted engine: After conversion, the cost of using the vehicle is significantly reduced. The combustion efficiency of natural gas is almost comparable to gasoline, but its price is only half that of gasoline, and it is more environmentally friendly. However, post-conversion, the engine is adjusted to better suit the characteristics of natural gas, which may lead to insufficient ignition energy and reduced engine power. Service life of a gas-converted engine: According to regulations, vehicles are scrapped after reaching 600,000 kilometers. If a gas-converted vehicle meets emission standards and has not reached the 600,000-kilometer mark, it will not be forcibly scrapped. However, converting to gas can damage the engine, leading to reduced power and increased wear, resulting in a shorter lifespan compared to a normal engine—typically around 8 years. For commercial vehicles or those planning to be replaced within a few years, converting to gas can be cost-effective, as it saves a significant amount on fuel expenses.
16
5
Share

What are the pros and cons of Continental TC6 tires?

Continental TC6 tires have the following advantages and disadvantages: Advantages of Continental TC6 tires: The Continental TC6 focuses on quiet performance and grip, and is a product developed for uneven road conditions. The advantages of the Continental TC6 tires are strong wear resistance, good tread design friction, and excellent elasticity and plasticity. It performs outstandingly in handling at high speeds, ensuring even force distribution when the tires contact the ground during turns, providing high-speed stability. Disadvantages of Continental TC6 tires: The tires are relatively large. The Continental TC6 is designed for relatively poor-quality roads in China, mainly achieved through structural "load reinforcement." This means that the cord fibers of the Continental TC6 are approximately twice as thick as those of conventional tires of the same specification, and the thickness of the sidewall structure is also nearly twice that of conventional tires of the same specification.
14
5
Share

What is the car with a cross called?

The car with a cross is Chevrolet, whose logo resembles a bow tie, symbolizing the generosity, elegance, and style of the Chevrolet brand. Chevrolet is an automobile brand under General Motors in the United States, offering a wide range of models including sedans, vans, pickup trucks, SUVs, and sports cars. Chevrolet sedan models include: Cruze, all-new Malibu XL, Malibu, Orlando, Cruze, Cruze Hatchback, Cavalier, and Sail 3. Among them, the Chevrolet Cruze is a new-generation model developed by General Motors with the goal of creating a benchmark in design and performance for compact cars, integrating global resources.
5
0
Share

Can You Open Windows on the Highway?

You can open windows on the highway. The situations in which windows can be opened on the highway and the effects of opening windows are as follows: Situations where windows can be opened on the highway: Opening one window on the highway is acceptable. If only the window on the driver's side is opened, the airflow inside the car will be relatively balanced, avoiding turbulence. The best position to open one window is the single rear window, especially when there are no passengers in the back seat. This allows front-seat passengers to enjoy suitable ventilation. In this case, opening a window is permissible, but it is not recommended for prolonged use on the highway. Effects of opening windows on the highway: When driving on the highway, it is actually best not to open the windows. Whether from a safety perspective, driving experience, or fuel efficiency standpoint, opening windows has negative impacts. Opening windows increases the vehicle's driving resistance, leading to higher fuel consumption compared to keeping windows closed. Additionally, wind noise from open windows can disrupt passenger conversations. Therefore, it is advisable not to open windows on the highway. If the car feels too stuffy, it is better to take a short break at a nearby service area and resume the journey after resting.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.