···
Log in / Register

How many points are deducted for not driving according to the guide?

6Answers
VanAlaina
08/26/2025, 01:28:49 AM

Not driving according to the guide is divided into two situations: one is not driving according to the guide lane at an intersection controlled by traffic lights with guide lanes marked, which does not result in points deduction but a warning or fine; the other is not driving in the prescribed lane on highways or urban expressways, which results in points deduction and a fine. There are three main types of illegal behaviors for not driving according to the guide lane: first, borrowing the left-turn lane when going straight; second, borrowing the straight lane when turning left; third, turning right arbitrarily in the left-turn and straight lanes. When motor vehicles pass through intersections controlled by traffic lights, they should follow the following regulations: at intersections with guide lanes marked, enter the guide lane according to the desired direction of travel; when preparing to enter a roundabout, yield to motor vehicles already in the intersection; when turning left, turn near the left side of the intersection center point. Turn on the turn signal when turning, and use low beams when driving at night; pass in sequence when encountering a green light; stop in sequence outside the stop line when encountering a red light. If there is no stop line, stop outside the intersection; when turning right and encountering a vehicle in the same lane waiting for the green light, stop and wait in sequence; at intersections without directional signal lights, turning motor vehicles should yield to straight-going vehicles and pedestrians. Right-turning motor vehicles from the opposite direction should yield to left-turning vehicles.

Was this review help?
114
Share
AryaRose
09/08/2025, 03:38:03 AM

I've been driving for over a decade and have seen many drivers get caught by cameras for hasty lane changes. Nowadays, failing to follow the designated lane markings usually results in a 2-point deduction. For example, if you go straight from a left-turn lane or suddenly turn right from a straight lane. A colleague of mine did just that—got fined 200 yuan with points deducted, and it was particularly dangerous because the cars behind couldn't react in time. When driving, it's crucial to pay attention to the arrows on the road. If you take the wrong lane, don't force a turn; it's better to go to the next intersection and circle back. Enforcement has gotten stricter recently, with high-definition cameras installed at many intersections. It's wiser to wait through an extra red light than to risk your license points.

Was this review help?
1
Share
Expand All
DelHazel
10/22/2025, 03:45:19 AM

I was just caught by an electronic eye a couple of days ago because the right-turn lane was too long, so I used the straight lane to make a right turn. The traffic police text message directly stated that I was fined for not following the directional markings, with a penalty of 2 points and 100 yuan. Nowadays, almost every city enforces this rule strictly. Although the points deducted are not many, if you lose all 12 points, you'll have to retake the written test for the driver's license. Actually, this kind of violation is easy to avoid—you can see the lane markings 50 meters in advance. Especially on rainy days or at night, you need to pay extra attention to the road markings. In some older urban areas, the directional lines are worn out, so driving slower is safer.

Was this review help?
3
Share
Expand All
Rafael
12/05/2025, 03:08:59 AM

This type of violation now uniformly deducts 2 points. I've studied Article 115 of the Traffic Law, which clearly states that failing to follow directional markings results in demerit points. The fines, however, vary by region—100 yuan in Jiangsu, and up to 200 yuan in Shanghai. The key issue is the high risk factor. Last week's rear-end collision in the news was caused by a car suddenly turning left from a straight lane. Remember, when approaching traffic lights, don't just focus on the signals; the arrows painted on the road are more important. Especially for new drivers, this is a common mistake—changing lanes haphazardly when the navigation prompts a turn too late.

Was this review help?
9
Share
Expand All
Sanders
01/25/2026, 09:40:28 PM

On regular roads, it's a 2-point deduction, but it's a different story if you occupy the emergency lane on the highway or if a truck drives in the passenger car lane. One of the drivers in our fleet learned this the hard way—he was caught turning left from a straight lane at an intersection, and three days later, a notification popped up on the 12123 app. I recommend installing a dashcam with lane departure warning; it beeps when you cross a solid line. Also, the peak hours around 7-8 AM are the most prone to violations, as everyone is in a hurry and cutting lanes. Actually, following the rules often gets you there faster, as forced lane changes frequently jam up the entire intersection, and getting caught means spending time dealing with the ticket.

Was this review help?
13
Share
Expand All
MariaFitz
04/21/2026, 03:09:32 AM

Mostly 2 points are deducted. I've observed the working logic of traffic cameras at intersections - crossing the solid white line between different lanes will trigger them. Especially at intersections with both arrow and circular traffic lights, some drivers turn right directly when the circular light turns green, completely ignoring that they're in a straight lane. The capture rate for this is over 90%, with fines ranging from 100 to 200. The method taught in driving schools is quite practical: start looking for guide signs 200 meters before the intersection and change lanes in stages according to the marked speed. Also, pay special attention when renewing your license after 6 years - accumulating 12 penalty points within the cycle would be much more troublesome.

Was this review help?
1
Share
Expand All
More Q&A

How to Drive Uphill?

Wait for about 10 seconds until the RPM drops below 1000. Press the brake with your right foot and release the handbrake with your right hand. Shift the gear from P (Park) to D (Drive). P stands for Parking gear, while D is the Drive gear. On steep slopes, quickly release the brake and accelerate promptly, applying slightly more throttle as needed.
106
Share

Where is the cabin air filter located in the Mercedes-Benz B200?

The cabin air filter in the Mercedes-Benz B200 is located above the footwell on the passenger side. The fixing housing can be seen without removing any panels. The recommended replacement interval for the cabin air filter is typically 10,000 kilometers. The function of the cabin air filter in vehicles is to prevent external air dust and debris from entering the cabin. Here is some information about cabin air filters: 1. Definition: When driving with the air conditioning on, the vehicle draws in external air into the cabin. However, this air contains various particles such as dust, pollen, soot, abrasive particles, ozone, odors, nitrogen oxides, sulfur dioxide, carbon dioxide, benzene, etc. 2. Function: It ensures the air filter fits tightly against the housing to prevent unfiltered air from entering the cabin. It separates solid impurities like dust, pollen, and abrasive particles from the air. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air and has strong and lasting moisture adsorption capabilities.
109
Share

How to Check the Production Date of Tires and Vehicles?

The production dates of tires and vehicles can be checked as follows: 1. Tire production date: Generally, a DOT mark is molded on one side of the tire. The last four digits of this mark provide information about the production date, consisting of four digits "AABB". The first two digits "AA" indicate the week of the year, while the last two digits "BB" represent the year. 2. Vehicle production date: The production date can be found on the nameplate, VIN (Vehicle Identification Number), and the vehicle's user manual. If the characters on the vehicle's factory nameplate appear altered, blurred, or the numbers are skewed, it is strongly advised not to purchase the vehicle. Additionally, the information on the nameplate in the engine compartment must exactly match that on the nameplate on the door side. If any discrepancies are found, it is recommended not to proceed with the purchase.
113
Share

What is the fuel consumption per 100 kilometers for the GAC Trumpchi GS8?

The GAC Trumpchi GS8 two-wheel drive version consumes around 9.6L/100Km, while the four-wheel drive version consumes around 9.9L/100Km. Below are specific methods to reduce fuel consumption: 1. Lightly press the accelerator: When starting at low speeds, the car is in a peak fuel consumption zone. Therefore, gently pressing the accelerator during startup can prevent excessively high RPMs and effectively reduce fuel consumption. 2. Avoid high RPMs: Try to avoid unnecessary high RPMs, as fluctuating engine speeds can significantly increase fuel consumption. 3. Regular maintenance: Change the engine oil and clean carbon deposits. 4. Avoid emergency braking: Anticipating road conditions in advance not only improves driving safety but also saves fuel. For example, gradually slowing down before traffic lights and utilizing inertia to coast.
108
Share

What is the unit conversion for tire pressure values?

Tire pressure values represent the air pressure in the four tires, with the most commonly used unit being bar. Below are specific introductions about tire pressure monitoring: Direct tire pressure monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure tire pressure. Wireless transmitters send pressure information from inside the tire to a central receiver module, which then displays the pressure data for each tire. Indirect tire pressure monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotation speeds between the tires, the system achieves the purpose of monitoring tire pressure.
108
Share

How to Determine if the Charcoal Canister Solenoid Valve is Good or Bad?

The methods to determine the condition of the charcoal canister solenoid valve are: 1. When the vehicle experiences fuel nozzle jumping during refueling, the charcoal canister is filled with gasoline, the throttle feels weak or jerky, and the idle speed is unstable, fluctuating up and down; 2. If the engine cannot start after shutting off or there are abnormal noises while driving, it indicates that the charcoal canister solenoid valve is damaged. The solutions for a damaged charcoal canister solenoid valve are: 1. Clean the fuel tank exhaust system; 2. Clean or replace the charcoal canister solenoid valve. The working principle of the charcoal canister solenoid valve is: It controls the purging function of the charcoal canister through the modulation of electrical pulse width. The ECU computer, based on different engine operating conditions, grounds or interrupts the solenoid valve circuit at a certain frequency. The ECU computer controls the vacuum of the purging charcoal canister by operating the normally closed solenoid valve.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.