How Many Points Are Deducted for Exceeding the Speed Limit by Less Than 20%?

2 Answers
LaLeilani
07/25/25 3:00pm
Exceeding the speed limit by more than 10% but less than 20% results in a deduction of 3 points. Here are the relevant details: 1. Within 10% of the speed limit: No penalty is imposed for exceeding the speed limit by less than 10%. 2. Above 20% of the speed limit: Exceeding the speed limit by more than 20% but less than 50% results in a deduction of 6 points. 3. Above 50% of the speed limit: Exceeding the speed limit by more than 50% results in a deduction of 12 points; the traffic management department of the public security authority shall confiscate the motor vehicle driver's license. The motor vehicle driver must report to the traffic management department of the public security authority at the place where the driver's license was issued or where the violation occurred within 15 days to attend a seven-day study session on road traffic safety laws, regulations, and related knowledge.
Was this review help?
17
2
Share
DelAngelina
08/11/25 9:18pm
Having driven for so many years, I've seen quite a few drivers confused about speeding rules. According to China's latest traffic regulations, which came into effect in April 2022, if the speeding margin is between 10% and 20%, no driving points will be deducted, only a fine of 200 RMB. Speeding below 10% usually results in a warning with no fine or point deduction. I noticed that this rule is set for minor speeding because the traffic authorities want to reduce penalties for minor violations and encourage safe driving. However, even though no points are deducted, I still recommend everyone to adhere to the speed limit, as speeding by 10%-20% can still lead to rear-end collisions or loss of control. Once, I accidentally exceeded the limit by 15% on the highway, and after being fined, I now always use the speed limit reminder feature on my phone's navigation to avoid similar situations. Also, remember to regularly check your speedometer calibration to prevent accidental speeding due to instrument errors. Safe driving is more important than point deductions.
Was this review help?
10
4
Share
Expand All
More Forum Discussions

How Long Can You Drive After the Engine Oil Change Reminder?

When the vehicle displays the "Change Engine Oil Now" alert, you can typically drive for about 10,000 kilometers more. Under normal driving conditions, new vehicles using synthetic oil can generally have their oil changed every 10,000 kilometers, and some can even extend up to 20,000 kilometers. More details are as follows: 1. Automotive maintenance professionals consider "normal driving" to mean frequent highway driving with minimal stop-and-go traffic. However, if you often drive in urban areas with frequent traffic lights, congestion, and most trips not exceeding a dozen kilometers, this is classified as "severe driving." 2. Engine oil is to a car what blood is to the human body, with the engine serving as the car's heart. During engine operation, piston movement generates friction, and gasoline combustion in the cylinders can raise temperatures up to 600°C, also producing metal particles and other waste from friction. 3. Operating in such extreme conditions, engine oil plays a crucial role in lubricating, cooling, and cleaning debris from engine friction, ensuring smooth operation and extending the engine's lifespan. Therefore, engine oil is vital for normal engine function and longevity.
11
4
Share

Are Manual Transmission Cars Easy to Drive?

Manual transmission cars are not difficult to drive, although they may feel a bit troublesome when you first start learning. However, after driving for a while, you will get used to it, and you might even find driving an automatic transmission car a bit uncomfortable. Manual Transmission in Cars: A manual transmission in a car is a gear-shifting device used to alter the speed and torque transmitted from the engine to the drive wheels. It enables the car to achieve different traction and speed levels under various conditions such as starting from a standstill, climbing hills, turning corners, and accelerating, while also allowing the engine to operate within a more favorable range. Automatic Transmission in Cars: An automatic transmission, as the name suggests, does not require the driver to manually shift gears. The vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Typically, an automatic transmission car has six gear positions, arranged from top to bottom as: P, R, N, D, S, L.
11
5
Share

How many wheels does a sedan have?

A sedan has four wheels plus one spare tire. Micro cars: Generally refers to models with a wheelbase below 2400mm, such as Chery QQ3, Chang'an Benben, Geely Panda, etc. These cars have a wheelbase of around 2340mm. Smaller models like the SMART FORTWO have a wheelbase of only 1867mm. Subcompact cars: Generally refers to models with a wheelbase between 2400-2550mm, such as Honda Fit, Toyota Vios, Ford Fiesta, etc. Compact cars: Generally refers to models with a wheelbase between 2550-2700mm. This category represents the mainstream of family sedans, such as Volkswagen Sagitar, Toyota Corolla, Ford Focus, Honda Civic, etc. Midsize cars: Generally refers to models with a wheelbase between 2700-2850mm. These models are typically used for both family and business purposes, such as Honda Accord, Toyota Camry, Volkswagen Magotan, Mazda6 Atenza, etc.
3
4
Share

How Long Does It Take to Fully Charge at Idle Speed?

Car idling for charging can fully charge the battery in about 1 hour. If the car is not frequently used and you are concerned about battery discharge, it is recommended to start the car and let it idle for about 20 minutes each week. Below is some relevant information about car idling: Specific Introduction: Idling is a working condition of a car, referring to the engine running in neutral gear. The engine speed during idling is called the idle speed. The idle speed can be adjusted by changing the throttle size, etc. Idling means the engine "exerts force without doing work." Meaning: Idling refers to the engine running without load, only overcoming the frictional resistance of its internal components, without delivering power externally. The minimum speed required to maintain stable engine operation is called idle speed, which is one of the five basic working conditions of an engine. For an engine with good working performance, the idle speed is generally between 550-800 rpm.
17
4
Share

Is Neutral Gear Represented by N?

It is indicated by the letter N. N (Neutral) stands for the neutral gear. Neutral gear is the N gear: The neutral gear is the N gear, while the P gear is the parking gear. All automatic transmission vehicles have both P and N gears, and both can be used when parking. However, there are differences between the N gear and the P gear. Their structures are different, and their usage scenarios also vary. Principle of Neutral Gear: The N gear is the neutral gear in automatic transmission vehicles, while the P gear is a gear setting that uses gears for braking. The principle involves using a pawl to hook onto the gear, stopping the rotation of the transmission part, thereby preventing wheel movement. The neutral gear should be used correctly in vehicles.
12
2
Share

What is the working principle of the braking device?

Braking system generally works by using the mutual friction between the non-rotating elements connected to the body (or frame) and the rotating elements connected to the wheels (or drive shaft) to prevent the rotation or tendency of rotation of the wheels. A brake is a device that has the function of decelerating, stopping, or maintaining the stop state of moving parts (or moving machinery). It is a mechanical component that stops or decelerates moving parts in machinery, commonly known as the brake. The brake is mainly composed of the brake frame, braking components, and operating device. More details are as follows: 1. Some brakes are also equipped with automatic adjustment devices for the clearance of braking components. To reduce braking torque and structural size, brakes are usually installed on the high-speed shaft of the equipment, but for large equipment with higher safety requirements (such as mine hoists, elevators, etc.), they should be installed on the low-speed shaft close to the working part of the equipment. 2. Brakes (brake-staff) can be divided into two major categories: industrial brakes and automotive brakes. Automotive brakes are further divided into service brakes (foot brake) and parking brakes (hand brake). During driving, the service brake (foot brake) is generally used to facilitate deceleration and stopping while moving forward, not just to keep the car stationary. The parking brake is used only when the service brake fails. When the vehicle is stationary, the parking brake (hand brake) is used to prevent the vehicle from moving forward or backward.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.