How Many Points and Fines for Running a Red Light?

1 Answers
PiperLynn
07/30/25 12:52am
According to Article 2, Section 1, Clause 2 of the "Scoring Standards for Road Traffic Safety Violations," driving a motor vehicle in violation of traffic signal lights will result in a deduction of 6 points. Article 3, Section 1, Clause 8 states that driving a motor vehicle in violation of prohibition signs or markings will result in a deduction of 3 points. How to Check for Running a Red Light: Common methods include the following: You can check for red light violations through the "Traffic Management 12123" app. After opening the app, log in using your ID card, then find and click on the "Violation Handling" option. In the violation handling section, you can see the current status of your vehicle. If there are any violations, the specific details will be displayed. You can also check at the service halls of traffic police branches in various cities and counties using touch-screen terminals. Alternatively, visit the official websites of local public security traffic management bureaus, find the "Vehicle Violation Query" section, enter your license plate number and engine number, and click "Query." Notification Timeframe for Running a Red Light: If you check at the vehicle management office or traffic police station, the results will be available the next day. If checking online, it may take 3-7 days. If waiting for an SMS notification, you will generally receive it within 10 days.
Was this review help?
15
4
Share
More Forum Discussions

What is the appropriate speed for the Baojun 360 during the first three months of use?

For the Baojun 360 during the first three months, it is advisable not to exceed 120 KM/h. Key points for running-in period driving: The running-in period for the Baojun 360 is 3,000 kilometers. During this time, the engine speed should not exceed 3,000 RPM, the speed should not surpass 120 KM/h, avoid overloading, sudden braking, and prolonged continuous driving. There is no specified best speed during the running-in period, but it is important not to exceed 120 KM/h. Definition of running-in period: The running-in period generally refers to the initial operation process of mechanical components involving contact, friction, and meshing, known as the running-in period. Initial driving phase mileage: The running-in period for a car refers to the initial driving phase after purchase or major repairs, typically covering 1,000 to 3,000 kilometers. This is the essential mileage required for components to fully contact, friction, adapt, and stabilize.
10
5
Share

Does the cigarette lighter in BMW 3 Series remain powered after turning off the engine?

Generally, the cigarette lighter in BMW 3 Series will power off 5 minutes after the engine is turned off. Safety shutdown situation: For most vehicles when the ignition switch is in the safety shutdown position, without circuit modification, it's impossible to maintain power supply after engine shutdown through vehicle settings. Determination by model: Whether the cigarette lighter remains powered after engine shutdown depends on the vehicle model. Some models cut power to the cigarette lighter immediately after shutdown, while others maintain power supply as it's a constant power source. Impact of remaining powered after shutdown: If power remains after shutdown, it continues to consume electricity, which may lead to battery depletion. If electrical devices aren't unplugged after shutdown and the vehicle remains unused for extended periods, battery depletion is certain. Introduction to constant power source: A constant power source means it remains powered regardless of engine status, without any switch for manual power cutoff. If power cuts off after shutdown, no electricity will be consumed, thus preventing battery depletion from this cause.
15
3
Share

What is the speed requirement for straight-line driving in Subject 3?

In the Subject 3 driving test, the speed for straight-line driving must not be lower than 40 km/h, and the gear should be in fourth. Below are the test items and precautions for Subject 3: 1. Starting the vehicle: First, adjust the seat, check the rearview mirrors, ensure the brakes and accelerator are functioning properly, and observe the surroundings to start safely. 2. Left and right turns and U-turns: Do not move the steering wheel within three seconds of activating the turn signal, and ensure the speed matches the gear. 3. Passing through areas like bus stops: Speed must not exceed 30 km/h, and check left and right for any pedestrians crossing. 4. Lane changing and overtaking: Do not move the steering wheel within three seconds of turning on the turn signal, and complete the maneuver within the specified time and distance. 5. Straight-line driving: Speed must not be lower than 40 km/h, steering wheel movement should not exceed three degrees, and complete the straight-line driving within the specified distance.
6
4
Share

What to Bring for Subject 3 Test?

Subject 3 test requires the following items: 1. ID card, which must be a valid original ID card or a valid original temporary ID card. 2. Admission ticket, which will be available after successful online registration and needs to be printed in advance. 3. Test barcode. For those who apply for a driver's license outside their registered residence, a valid original local residence permit must also be carried. Additional information about Subject 3 is as follows: 1. Subject 3: Also known as the road safety driving test, it is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's test. The content of the road driving skills test varies depending on the type of vehicle being licensed. 2. Content of Subject 3: Vehicle preparation, light simulation test, starting, driving in a straight line, shifting gears, changing lanes, pulling over, driving straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and driving at night.
11
4
Share

What are the requirements for gear shifting in Subject 3?

Subject 3 gear shifting speed requirements are as follows: 1. Follow examination requirements: Perform corresponding gear shifting operations based on the voice prompts from the examination system. 2. Upshifting technique: When upshifting, the action should be swift and gentle, with accurate gear selection. Do not look down at the gear lever or coast in neutral. Before upshifting, check the left and right rearview mirrors to ensure road safety, release the throttle with your right foot, press the clutch with your left foot, engage the appropriate gear, then slowly release the clutch while gently pressing the throttle to accelerate. 3. Downshifting technique: Before downshifting, check the left and right rearview mirrors to ensure road safety. For example, when downshifting from 3rd to 2nd gear, release the throttle (or apply the brake) at 30 km/h, allowing the speed to gradually decrease to 20 km/h before shifting to 2nd gear. 4. Gear and speed matching: Maintain proper gear and speed matching during driving. Use 1st gear at 0-10 km/h, 2nd gear at 10-20 km/h, 3rd gear at 20-30 km/h, and 4th gear at 30-40 km/h.
11
4
Share

Should You Get in the Car First or Walk Around It for Subject Three?

For Subject Three, you should first get in the car to verify your identity. Below is relevant information about the driving test Subject Three: 1. Introduction to Subject Three: Subject Three includes the road driving skills test and the safe and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies for different types of vehicles eligible for driving. 2. Specific Test Content for Subject Three: The road driving skills test generally includes: preparation before getting in the car, simulated lighting test, starting, driving straight, shifting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving. The safe and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, methods for handling emergencies such as tire blowouts, and knowledge of post-accident handling.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.