How many liters of fuel can the Nissan Qashqai fuel tank hold?

2 Answers
MacMiranda
08/28/25 3:17am
Nissan Qashqai fuel tank can hold 65 liters of fuel. The fuel tank capacity determines the driving range. For two cars with identical engines, the larger the fuel tank, the farther the car can travel. The Nissan Qashqai is a compact SUV under Dongfeng Nissan. Taking the 2021 Qashqai Zhixiang Edition as an example, its body dimensions are: length 4401mm, width 1837mm, height 1593mm, wheelbase 2646mm, and trunk capacity 486l. The 2021 Qashqai Zhixiang Edition is equipped with a 2.0L 4-cylinder naturally aspirated engine, with a maximum horsepower of 151PS, maximum power of 111kW, and maximum power speed of 6000rpm per minute.
Was this review help?
2
1
Share
BriellaLynn
09/09/25 8:37am
As a Qashqai owner, my car's fuel tank capacity is approximately 65 liters. When filled up, it can run about 600 to 700 kilometers, depending on driving habits and road conditions—city traffic consumes fuel faster, averaging around 10 liters per 100 kilometers, but driving at reduced speeds on highways saves a lot. On long trips, I prefer to fill up the tank before setting off to avoid searching for gas stations midway. The Qashqai's range is indeed quite reassuring. For maintenance, I regularly check for leaks at the fuel line connections and inspect the sealing ring on the fuel cap for aging, which helps extend the vehicle's lifespan. Overall, the tank size is well-designed—neither too big nor too small—making it practical for family trips or daily commutes.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

What kind of engine oil should be used for the maintenance of Trumpchi GS8?

Trumpchi GS8 uses 5W30 semi-synthetic engine oil for maintenance. The functions of engine oil are: 1. To reduce wear between the piston and cylinder, and between the main shaft and bearing bush, providing lubrication; 2. To assist in cooling the engine internally; 3. To clean carbon deposits, sludge, and metal particles from engine components; 4. To reduce gas leakage and prevent external pollutants from entering; 5. To absorb shock and cushion the load on the piston, piston pin, connecting rod, and crankshaft bearings. Taking the 2021 Trumpchi GS8 as an example, its front suspension is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. It is equipped with a 2.0T turbocharged engine, with a maximum horsepower of 252PS, a maximum power of 185kW, and a maximum torque of 390Nm, matched with a 6-speed automatic transmission.
5
5
Share

Does adding some windshield washer fluid to the gas tank have any impact?

If a very small amount of windshield washer fluid is added to the gas tank, the impact is minimal. Since water is denser than gasoline, it will settle at the bottom and not affect the vehicle. However, if a large amount of windshield washer fluid is added, the gas tank must be thoroughly cleaned. Functions of windshield washer fluid: Anti-freeze properties: The presence of alcohol and ethylene glycol significantly lowers the freezing point of the liquid, providing anti-freeze effects and quickly dissolving frost. Anti-static properties: After cleaning with windshield washer fluid, substances adsorbed on the glass surface can eliminate static charges on the glass, providing anti-static benefits. Precautions for adding windshield washer fluid: Vehicle-specific characteristics: Each vehicle has different requirements for windshield washer fluid. Factors such as concentration, molecular weight requirements, and pressure capacity must be understood to use the fluid effectively. These specifications are usually outlined in the vehicle's user manual, which may also include details about the electrical circuits in the wiper system. Only after confirming the vehicle's requirements can the next steps be taken. Selection and use of windshield washer fluid: After understanding the vehicle's requirements, choose a suitable windshield washer fluid. Many manufacturers offer pre-mixed fluids tailored to specific vehicle models, which can be added directly. If not available, you may need to purchase and mix the fluid in the correct proportions. When filling, avoid overfilling—top up as needed. Additionally, try to stick to the same brand to prevent clogging in the system. Temperature considerations: In colder climates, especially during winter, choose a windshield washer fluid with anti-freeze properties. Homemade mixtures may freeze, so drivers in northern regions should opt for ready-to-use anti-freeze solutions.
8
1
Share

How to Match the Tire Pressure Monitoring for Buick Envision?

Buick Envision tire pressure monitoring matching method: First, press the one-touch start button to start the vehicle, otherwise the vehicle cannot be operated. Locate and press the SET button on the left side of the multifunction steering wheel, then click the checkmark button on the right side of the multifunction steering wheel to confirm the operation. Once matched successfully, the tire pressure display on the central dashboard will show normal readings. The Buick Envision is a model under Shanghai General Motors, with dimensions of 4686mm in length, 1839mm in width, and 1660mm in height, and a wheelbase of 2750mm. In terms of exterior, this vehicle features a newly designed intelligent drag-reducing grille, aluminum roof rails, newly styled chrome dual exhaust pipes, 19-inch multi-spoke aluminum alloy wheels, and multifunctional exterior rearview mirrors.
6
4
Share

What is the China V Emission Standard?

China V Emission Standard is the fifth stage national standard for motor vehicle pollutant emissions, also known as "China V Standard". The emission control level of China V Standard is equivalent to the European Union's Euro 5 emission standard currently in implementation. It imposes more stringent restrictions on motor vehicle emissions such as nitrogen oxides (NOx), hydrocarbons (HC), carbon monoxide (CO), and particulate matter (PM). From China I to China VI, each upgrade in standard reduces vehicle pollution by 30% to 50%. Compared to China IV Standard, China V Standard can reduce nitrogen oxide emissions by 25% for light-duty vehicles and 43% for heavy-duty vehicles.
12
0
Share

When is the first maintenance for the Cavalier?

The first maintenance for the Cavalier is required within 5,000 kilometers or three months. The primary tasks for the first maintenance include changing the engine oil and oil filter. It is important to note that when replacing the engine oil, the oil filter must also be replaced simultaneously. Failure to replace the oil filter may result in the new oil being contaminated by the old filter. The Chevrolet Cavalier is a compact car under SAIC-GM Chevrolet, with dimensions of 4,474 mm in length, 1,730 mm in width, and 1,471 mm in height, and a wheelbase of 2,600 mm. In terms of power, this car is equipped with two engines: a 1.5-liter naturally aspirated engine and a 1.0-liter turbocharged engine.
14
4
Share

Does the Baojun 310w comply with China 6 emission standards?

The Baojun 310w complies with China 6 emission standards, which refer to the National Sixth Stage Emission Standards for Motor Vehicles. These standards are established to control vehicle pollutant emissions and improve ambient air quality. Taking the 2020 Baojun 310w as an example, its body structure is a 5-door, 5-seat station wagon with dimensions of 4620mm in length, 1710mm in width, and 1535mm in height. It has a wheelbase of 2750mm, a fuel tank capacity of 40 liters, and a curb weight of 1206kg. The 2020 Baojun 310w features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 105PS, a maximum power output of 77kW, and a maximum torque of 135Nm. The vehicle is paired with a 5-speed mechanical automatic transmission.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.