How many liters of engine oil does the Envision need for an oil change?
3 Answers
Envision requires 5.4 liters of engine oil for an oil change. Here are the specific details about engine oil: 1. Engine oil refers to the lubricant specifically used in internal combustion engines. In addition to lubrication, it also has functions such as cleaning, rust prevention, and cooling. 2. If too much engine oil is added, it will increase the amount of oil splashed onto the cylinder walls by the rotation of the crankshaft and connecting rod, increase the rotational resistance of the crankshaft, reduce the engine's output power, and increase fuel consumption. 3. It is advisable to maintain the oil level slightly below the MAX mark on the oil dipstick. The engine oil dipstick has an upper limit and a lower limit. The normal oil level should be between the upper and lower limits.
Every time I change the oil for my Buick Envision, I remember it needs about 5.5 liters of oil. After driving for several years, I've gathered quite a bit of experience: the standard amount is around 5.4 liters, but mechanics usually prepare 6 liters because older models might leak a bit or have residual oil in the filter. Don’t underestimate this amount—too little oil can cause the engine to overheat and wear out, while too much can lead to leaks and waste. Using 5W-30 full synthetic oil is ideal, especially in varying weather conditions, as it protects the engine. I make it a habit to change the oil every 8,000 kilometers, always replacing the oil filter—it only costs a few dozen bucks, and changing it ensures more accurate oil filling. Neglecting maintenance leads to increased fuel consumption and engine noise over time; addressing it early saves both hassle and money. After an oil change, I always let the car idle for a few minutes, check the dipstick to ensure the level is within the safe range, and then drive with peace of mind.
When it comes to changing the oil in the Envision, I've done it myself a few times, and it takes about 5.5 liters to get it right. Here's the process: first, drain all the old oil completely, wait until the oil pan is empty, then add new oil. Starting with 5 liters is a baseline, but after changing the oil filter, there's usually a bit left to top up, so adding up to 5.5 liters ensures stability. Don't use the wrong type of oil—the manual recommends 5W-30 synthetic oil, so avoid cheap alternatives, as they may have thinner oil films and provide insufficient protection. I’d like to remind everyone that while changing the oil, take a quick look at the air filter and brake fluid—these minor checks only take a few minutes and can save you extra costs later. Going to a professional shop saves time and effort, costing around 500-600 RMB per service. With the right oil level, the car runs quietly and smoothly, and fuel consumption stays low. Regular maintenance, like what I’ve done, keeps the car in great shape even after seven or eight years of driving.
