How many kilometers should the variator rollers be replaced?

1 Answers
DelDallas
07/29/25 11:54pm
There is no specific replacement interval for variator rollers, as it depends on the actual usage conditions. Variator rollers are one of the rotating components in scooters, and they are divided into light variator rollers and heavy variator rollers. Lighter variator rollers provide stronger acceleration, allowing the vehicle to reach certain speeds in a shorter time. Here is some extended information about the function of variator rollers: If the variator rollers are heavy, the car's power performance during acceleration is not very good, the acceleration is relatively sluggish, and it takes longer to reach high speeds. However, when the variator rollers slide to the end of the variator pulley, the inertia is greater, and the engine's operating speed becomes lower, which can result in better fuel efficiency during prolonged high-speed driving.
Was this review help?
8
1
Share
More Forum Discussions

Why does a diesel car have unstable idle speed with fluctuations?

Unstable idle speed in a car is mainly manifested by the fluctuation of the tachometer needle and unstable pointing during idling. Unstable idle speed can be considered one of the most common engine faults, which can range from minor to severe. It is often accompanied by idle vibration. The following are the reasons for unstable idle speed: 1. Oil accumulation and carbon deposits in the throttle body, and dirty intake passages: Blocked intake passages can cause idle speed fluctuations, while carbon deposits or oil in the throttle body are the most common causes of unstable idle speed. Carbon deposits in the throttle body can affect its opening, thereby influencing the intake air volume, causing the engine speed to fluctuate significantly and become very unstable after a cold start, accompanied by strong vibrations. 2. Fuel system blockages represented by the fuel injector and intake pipe faults: These can lead to insufficient fuel supply pressure, poor fuel atomization, an imbalanced air-fuel mixture ratio, and incomplete combustion, resulting in related fault phenomena. If there is an air leak in the intake pipe, it can affect the accuracy of the air flow meter's data, causing the ECU to inaccurately control the intake air volume, which also leads to an imbalanced air-fuel mixture ratio and unstable engine idle speed.
13
5
Share

Is the Mandatory Scrapping of Motorcycles Cancelled?

Mandatory scrapping of motorcycles has not been cancelled for now. The quality of motorcycles is getting better and better, and there are more and more large-displacement motorcycles. The mandatory scrapping period has always restricted the development of China's motorcycle industry. Although there are related news reports that the mandatory scrapping will be cancelled, it will still take several years to achieve this result. The difference between guided scrapping and mandatory scrapping: Guided scrapping is a recommendation for scrapping, but if the vehicle still meets the requirements for continued use, it does not have to be scrapped. Mandatory scrapping means the vehicle must, without a doubt, be scrapped. There are four standards for mandatory scrapping: 1. Reaching the prescribed service life; 2. After repair and adjustment, the vehicle still does not meet the national standards for in-use vehicle safety technical requirements; 3. After repair and adjustment or the adoption of control technology, the vehicle's emissions of pollutants or noise still do not meet the national standards for in-use vehicle requirements; 4. Failing to obtain the motor vehicle inspection qualification mark for three consecutive inspection cycles after the expiration of the inspection validity period.
8
1
Share

What is the meaning of the Mercedes-Benz logo?

The three-pointed star of Mercedes-Benz symbolizes the aspiration to conquer land, sea, and air. This emblem originated after the merger of Daimler-Motoren-Gesellschaft and Benz & Cie. Daimler's original trademark was a three-pointed star, while Benz's logo featured the word "Benz" within a double circle. Following the merger, the Daimler-Benz company adopted a single circle enclosing a three-pointed star as its trademark. Below is relevant information: 1. Mercedes-Benz: Mercedes-Benz, a German luxury automobile brand, is recognized as one of the world's most successful premium car brands. As the inventor of the automobile, it is renowned for its perfect engineering, rigorous quality standards, innovative capabilities, and a series of classic coupe models. The Mercedes three-pointed star has become one of the most famous automotive and brand symbols globally. 2. Origin: The name "Mercedes" carries the meaning of "luck" in Spanish. Unfortunately, the namesake beauty died at the age of forty due to an unfortunate marriage, yet the practice of naming the brand after her spread rapidly. By 1916, the star emblem and the Benz name were finally unified.
16
2
Share

What License Plate Does a Hybrid Vehicle Use?

Hybrid vehicles are divided into three types: plug-in hybrid, range-extended hybrid, and traditional hybrid (gasoline-electric hybrid). Among these, plug-in hybrids and range-extended hybrids are classified as new energy vehicles and can only be registered with green license plates. Traditional hybrid vehicles, which are not considered new energy vehicles, can only be registered with blue license plates. Relevant details are as follows: 1. Since the launch of new energy vehicle license plates on November 20, 2017, if a vehicle qualifies as a new energy vehicle, it can only be issued a new energy license plate during registration, transfer, or other administrative procedures, and cannot be registered with a standard small car license plate. 2. For new energy vehicles that have already been registered with standard small car license plates, they may continue to use the existing plates or apply to switch to new energy vehicle license plates. 3. Eligibility criteria for new energy license plates: First, the applicant must be registered in China and possess sufficient self-owned capital and financing capabilities commensurate with the project investment. Second, the applying enterprise can only produce 'pure electric passenger vehicles,' including pure electric and range-extended (series hybrid with external charging capability) passenger vehicles, which must comply with relevant national standards.
9
3
Share

What is the fuel consumption of the Volkswagen Santana?

The actual fuel consumption of the Santana is approximately 5.9~6.6L/100km. Here is some relevant information about the Santana: 1. Historical Background: The Santana (SANTANA) sedan is a brand of cars produced by Volkswagen in California, USA. Starting from 1985, after more than 20 years of production history, the ordinary Santana sedan (Santana 87) can be seen all over the country. 2. Interior: Like its exterior, the interior of the new Santana also emphasizes simplicity and restraint, which has always been Volkswagen's strong suit. The two-tone color scheme makes the new Santana more suitable for its positioning as a family car. To meet cost requirements, the interior uses a large amount of plastic material, which is understandable for Volkswagen's entry-level compact sedan. Wooden decorative strips are only available in high-end models. The center console is made of wood material, and the air conditioning adjustment buttons use a knob design. The central slender display shows temperature and air volume. The new Santana's audio control, air conditioning buttons, and knobs are clear and easy to understand.
17
5
Share

What Causes the Noise in a Motorcycle Exhaust Pipe?

Motorcycle exhaust pipe noise can be attributed to carburetor throttle knocking, air leakage sounds, and valve knocking. Carburetor throttle knocking: This sound is almost inaudible at idle speed. It becomes most pronounced when the throttle is turned to 1/4 open, gradually diminishes with further throttle increase, and disappears completely when the throttle is fully opened. Air leakage sounds: If the fastening bolts are loose or the gaskets are damaged between the cylinder and cylinder head, cylinder and crankcase, or left and right crankcases, a "squeaking" air leakage sound will occur. The noise is difficult to detect during steady-speed operation. During inspection, obvious oil traces can be found at the leakage points. Minor cases can be resolved by tightening the fastening bolts, while severe cases require gasket replacement. Valve knocking: If the valve clearance becomes too large due to improper adjustment or part wear, the valve mechanism will produce short and sharp knocking sounds. This knocking does not vary with engine speed. It can be eliminated by adjusting the valve clearance or replacing worn parts.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.