···
Log in / Register

How many kilometers for the second maintenance of Changan CS75?

6Answers
DelAnna
07/29/2025, 02:34:23 AM

The second maintenance for Changan CS75 is performed at 10,000 kilometers, which includes replacing the engine oil, oil filter, fuel filter, and air conditioning filter. Additional details are as follows: 1. After the first maintenance, Changan CS75 requires maintenance every 5,000 kilometers. 2. Regular maintenance, commonly known as minor maintenance, is required every 5,000-10,000 kilometers, while deep maintenance, commonly known as major maintenance, is required every 30,000-50,000 kilometers. 3. Minor maintenance involves changing the engine oil, oil filter, and air filter. Major maintenance includes changing the engine oil. Depending on the quality of the oil and additional maintenance items, major maintenance may also involve replacing the transmission filter, transmission oil, brake fluid, checking brake pads, spark plugs, and coolant, cleaning the throttle body as needed, replacing the oil filter, air filter, checking the air conditioning filter for replacement if necessary, carbon canister, fuel injection system, and intake pipes.

Was this review help?
116
Share
StLeah
08/12/2025, 06:16:20 PM

As a former owner of the Changan CS75, I recall that the second maintenance is typically around 10,000 kilometers, as suggested by the user manual. My first maintenance at 5,000 kilometers included an oil change and basic inspection, and by 10,000 kilometers, it was necessary to visit the 4S dealership for the second maintenance, which involved replacing the engine oil and oil filter, checking the tires and brake system, among other things. I found that timely maintenance helps prevent minor issues from escalating, such as engine wear or carbon buildup, and can save on repair costs in the long run. It's advisable to book an appointment in advance, with costs ranging roughly between 200 to 400 yuan, depending on the parts replaced. Don't delay too long, as exceeding the mileage limit might void the warranty and compromise the vehicle's safety condition.

Was this review help?
1
Share
Expand All
IkerAnn
10/03/2025, 11:41:31 PM

For the Changan CS75, it's very common to set the second maintenance interval at 10,000 kilometers. The manual clearly states that this includes oil changes, air filter replacement, and comprehensive inspections. Delaying these services can easily lead to engine noises or increased fuel consumption, and in severe cases, may damage critical components. I recommend that owners keep track of the odometer themselves and pay attention to the time intervals every few thousand kilometers. With good daily driving habits, the vehicle's performance will be more stable after maintenance. Additionally, when taking a new car in for service, it's a good opportunity to have the technician check the suspension system for any looseness. Ensuring even intervals between services can extend the engine's lifespan.

Was this review help?
17
Share
Expand All
HarleyMarie
11/17/2025, 12:16:54 AM

I pay great attention to budget when choosing a car. The second maintenance for the Changan CS75 is required at 10,000 kilometers, and spending a little money is well worth it. The manual specifies basic oil changes and filter replacements, costing around 200 yuan, but neglecting it can lead to premature engine aging, which would be more expensive to repair. I believe controlling daily driving habits, such as avoiding sudden acceleration, can reduce maintenance needs. Once the mileage is reached, go for a check-up promptly to keep the car running smoothly.

Was this review help?
8
Share
Expand All
VonIsaac
01/07/2026, 01:53:30 AM

When family members are in the car, I pay more attention to maintenance safety. The second maintenance for the Changan CS75 is recommended at 10,000 kilometers, mainly including oil change and inspection of key components such as brakes and lights. The manual emphasizes that regular maintenance can prevent sudden failures, making long-distance driving at night more reassuring. I always have professional shops thoroughly test the system to ensure normal tire pressure. Don't skip this step; exceeding the mileage increases the risk of brake failure.

Was this review help?
16
Share
Expand All
VanEverett
04/04/2026, 12:52:45 AM

To reduce environmental pollution, I will promptly perform the second maintenance for my Changan CS75 at 10,000 kilometers. The manual recommends changing the engine oil and inspecting the emission system at this time to maintain engine efficiency and reduce exhaust pollution. Long-term neglect of maintenance will increase the carbon footprint. I suggest combining it with daily driving habits, such as smooth acceleration and avoiding short trips. This way, the car can last several more years and be more cost-effective and eco-friendly.

Was this review help?
2
Share
Expand All
More Q&A

What grade of gasoline should the Changan Oushang X7 use?

According to the vehicle manual, the Changan Oushang X7 can use 92-grade gasoline. From a professional perspective, the difference between 95-grade and 92-grade gasoline lies in their octane ratings. The octane rating is a technical term that measures the gasoline's resistance to knocking. First, the gasoline grade represents its anti-knock performance. A higher grade indicates better anti-knock capability, but it has no relation to the quality of the gasoline itself, nor does it mean that higher-grade gasoline contains fewer impurities. Both 92-grade and 95-grade gasoline have the same fuel quality and cleanliness; the main difference is the amount of anti-knock additives. Some people prefer to use higher-grade gasoline for their cars, believing that it offers better cleanliness, burns longer, and produces less carbon deposits. However, this is a misconception! Different engines require different anti-knock values, and different gasoline grades are suitable for engines with varying compression ratios. Therefore, it is sufficient to use the gasoline grade recommended by the manufacturer, and there is no need to pursue higher-grade gasoline, which would only lead to unnecessary expenses.
117
Share

What Causes the Car Horn to Sound Unprovoked After Locking?

Car horn sounding unprovoked after locking is primarily due to a faulty lock switch or false triggering of the internal monitoring alarm. Below are detailed explanations of the specific causes: Faulty Lock Switch: The main driver's door, passenger door, two rear doors, front hood lock, and trunk lock may not be properly closed or could have damaged lock switches after parking, leading to poor contact. This can trigger the anti-theft alarm system after locking. It's advisable to check the switch status of all four doors, engine hood, and trunk lid, and proceed with repairs or replacements if necessary. False Triggering of Internal Monitoring Alarm: Some vehicles are equipped with an internal monitoring alarm function. After locking, the internal ultrasonic sensors monitor the interior for any movement to ensure safety, triggering an alarm immediately if detected. If the alarm is triggered without any actual movement inside, it's recommended to visit a repair facility promptly to avoid prolonged false alarms, which could damage the battery.
105
Share

What is the size of R16 tires?

In automotive tire specifications, R16 indicates a rim diameter of 16 inches. Most tire model markings appear as: 215/70R15. The meanings of these numbers are as follows: 215 represents the tire section width in millimeters, typically ranging between 145–285mm in 10mm increments; 70 is the aspect ratio, which is the ratio of the tire sidewall height to the tire section width, with 70 representing 70%. Generally, tire aspect ratios range between 30%–80%. Under normal circumstances, standard passenger cars should not use tires with an aspect ratio >75%, while luxury cars and high-performance sports cars are recommended to use tires with an aspect ratio < 60%; R stands for Radial, indicating the tire has a radial structure, and 15 is the outer diameter of the rim in inches. If a tire is marked as: 6.00–12, this indicates it is not a radial tire but a bias-ply tire. Such tires are rarely seen in passenger cars today due to their inferior safety, load capacity, and high-speed stability, and are only used in some low-end off-road vehicles and heavy-duty trucks.
118
Share

How to Identify the Year of a Car from Its VIN?

The Vehicle Identification Number (VIN) is the unique identifier for a car, often referred to as the 'car's ID card.' It contains crucial information about the vehicle, including the country of origin, manufacturer, engine model, vehicle type, and production year. The details are as follows: 1. The first digit: Indicates the country or region where the vehicle was manufactured. 2. The second digit: Represents the car manufacturer. 3. The third digit: Denotes the vehicle type. 4. The fourth to eighth digits: Describe vehicle characteristics, such as model, body style, series, and type. 5. The ninth digit is a check digit: It must be verified according to the 'World Manufacturer Identifier (VIN) Manual.' 6. The tenth digit represents the year: This indicates the model year of the car.
120
Share

What is the 0-100 km/h acceleration time of the Binrui 1.4T?

According to official data, the 2021 Binrui 1.4T has a 0-100 km/h acceleration time of 8.9 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in faster acceleration. The 2021 Santana has a maximum torque of 145 Nm and a 0-100 km/h acceleration time of 12.6 seconds, while the 2021 Binrui 1.4T model has a maximum torque of 235 Nm and a 0-100 km/h acceleration time of 8.9 seconds. Transmission efficiency: The transmission acts as a medium for power delivery, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission (MT) > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The 2021 Binrui 1.4T is equipped with a manual transmission (MT). Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The 2021 Santana has a power-to-weight ratio of 100 Hp/T and a 0-100 km/h acceleration time of 12.6 seconds, while the 2021 Binrui 1.4T model has a power-to-weight ratio of 111 Hp/T and a 0-100 km/h acceleration time of 8.9 seconds.
111
Share

How to Use Cruise Control in the 12th Generation Crown?

Press the control switch to activate the cruise control standby mode. After accelerating to the desired speed, push the control lever downward to set the cruising speed. To accelerate, push the control lever upward or press the accelerator pedal. To cancel cruise control, lift the control lever upward or turn off the main cruise control switch. Press the cruise control button, and the car will maintain a steady speed. Pressing the brake pedal will immediately deactivate this function. Fine-tune the speed by increasing or decreasing it slightly. After pressing the main cruise control switch, the cruise control icon will appear on the dashboard to indicate standby mode. Gently pressing the brake pedal will cancel the cruise control status.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.