How Many Kilometers Count as a New Car?

What are the reasons for a motorcycle's lack of power when going uphill and inability to accelerate?

The reasons for a motorcycle's lack of power when going uphill and inability to accelerate are: 1. Blockage in the fuel supply system or air filter, or a carburetor that hasn't been cleaned for a long time, leading to decreased engine combustion efficiency; 2. Clutch slippage, causing the engine's power to not be transmitted properly; 3. Engine malfunctions, such as incorrect valve timing or excessively small valve clearance, resulting in insufficient engine power and poor uphill performance. A motorcycle is a two- or three-wheeled vehicle driven by a gasoline engine, steered by handlebars for front-wheel direction, known for its lightweight, agility, and speed. It is widely used for patrol, passenger and cargo transportation, and also serves as sports equipment. Broadly speaking, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes. A motorcycle consists of five main parts: the engine, transmission system, running gear, braking system, and electrical instrumentation equipment.

20

0

Share

What to Do When the Car Door Won't Lock?

If the car door won't lock, the simplest method is to use the spare mechanical key to lock it. The reasons why the car door won't lock are as follows: 1. If you're using the remote key to lock the door, it might be due to a malfunctioning remote lock or factors like aging of the car's remote transmitter antenna, which can render the remote key ineffective. In such cases, you can use the spare mechanical key to lock the door. 2. Another scenario is the presence of strong magnetic field interference around the car. Since smart keys use low-intensity radio waves, they may not function properly under magnetic interference. 3. If the car frequently fails to lock remotely in a particular location, you should be wary of a door jammer. Some criminals use a radio signal jammer that emits electromagnetic waves at the same frequency as the lock signal, thereby blocking the electronic code of the car's central locking system and temporarily disabling it.

19

3

Share

Where is the tire tread pattern model located?

Tire tread pattern model is located on the sidewall of the tire. Below is relevant information about tire tread patterns: 1. Model: The tire tread pattern model can be found on the tire sidewall, for example, numbers like 225/55R18 103V TR257. Here, 225 represents the tire tread width, 55 is the tire sidewall width, R stands for radial tire, 18 indicates the rim size, 103 is the tire load index, V is the speed rating, and TR257 refers to the tread pattern. Tire tread patterns consist of various longitudinal, lateral, and diagonal grooves on the tire surface. 2. Function: Longitudinal tread patterns, characterized by continuous lines, primarily serve the function of draining water in rainy conditions and also aid in heat dissipation for the tire, but they lack sufficient grip. Lateral tread patterns, on the other hand, provide greater grip, thereby compensating for the inherent shortcomings of longitudinal patterns. The longitudinal grooves on tires mainly facilitate quick water drainage but result in reduced grip capability, whereas the lateral grooves offer better grip but have inferior water drainage and directional stability.

12

0

Share

At what water level does a submerged car start to be affected?

When a car is submerged to a height above half of the wheel, it starts to be affected. At this level, improper handling may lead to water entering the interior, engine, or transmission, posing significant risks. This can result in costly repairs and a substantial reduction in the vehicle's resale value. Below are the relevant details: Effects: First, it can damage the car's internal electronic control systems. Starting the engine after water ingress may cause immediate smoke, and water mixing with the oil can lead to engine seizure and total failure. Submerged electrical circuits may short-circuit, causing malfunctions in systems like ABS. Hazards: Submersion can easily cause rusting of body components, shortening the vehicle's lifespan and reducing safety performance. For example, water-damaged vehicles may experience wire corrosion and rust, leading to sudden stalling or spontaneous combustion due to short circuits while driving, with potentially catastrophic consequences. Additionally, the repair costs for water-damaged vehicles are extremely high, often exceeding 50% of the vehicle's value for severely submerged cars.

3

2

Share

What to Do When Experiencing Severe Jerking During 2nd to 3rd Gear Shift in Automatic Transmission?

Severe jerking during gear shifts in an automatic transmission can be caused by several factors, such as a stuck solenoid valve inside the transmission, dirty transmission fluid, pressure loss in the oil pump, or even clutch slippage within the transmission. Jerking, or noticeable shift shock, primarily occurs when there is a mismatch between the engine speed and the driveshaft speed. Below is an introduction to automatic transmissions: 1. Overview: An automatic transmission, as the name suggests, eliminates the need for manual gear shifting by the driver. The vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Typically, an automatic transmission has six gear positions, arranged from top to bottom as: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low). 2. Types: Common types of automatic transmissions in vehicles include hydraulic automatic transmissions, hydrostatic transmissions, electric transmissions, stepped mechanical automatic transmissions, and continuously variable transmissions (CVTs).

11

1

Share

What are the requirements for scheduling Subject 2 of the driving test?

The requirements for scheduling Subject 2 of the driving test are: You can schedule the Subject 2 test 10 days after obtaining the learning driving permit (passing the Subject 1 test). In regions that implement a clock-in training hour system, you must also complete the required training hours before scheduling. Subject 2, commonly known as the small road test, is the first practical test for students after the theoretical Subject 1. The main test items include five mandatory tasks: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. The steps to schedule Subject 2 are: 1. Open the Traffic Management 12123 app, click on 'Schedule Exam,' select Subject 2, and then check the agreement to confirm you have read it; 2. After the scheduling request is accepted, you can check the status in the online progress query section; 3. If the application is approved, you will receive an SMS reminder, and you can then proceed to the designated test center at the specified time.

11

5

Share

How Many Kilometers Count as a New Car?

What are the reasons for a motorcycle's lack of power when going uphill and inability to accelerate?

What to Do When the Car Door Won't Lock?

Where is the tire tread pattern model located?

At what water level does a submerged car start to be affected?

What to Do When Experiencing Severe Jerking During 2nd to 3rd Gear Shift in Automatic Transmission?

What are the requirements for scheduling Subject 2 of the driving test?

What are the differences between Viking by Continental and German Continental?

What is the Difference Between Minor and Major Vehicle Maintenance?

How to Load 8 Discs in a BMW 5 Series?

Is the maintenance service provided by 4S stores nationwide applicable?