···
Log in / Register

How many kilometers can the Tanyue fully synthetic engine oil run?

3 Answers
JacksonLynn
09/01/25 8:20am
Tanyue fully synthetic engine oil can run for 10,000 kilometers. Introduction to fully synthetic engine oil: Fully synthetic engine oil for cars has good cleaning and antioxidant properties, and is entirely composed of synthetic compounds. Engine oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining its basic properties. Additives can compensate for and improve the shortcomings of the base oil's performance, endowing it with certain new properties, and are an important part of lubricating oil. Common engine oil change intervals: The oil change interval for fully synthetic engine oil is 10,000 kilometers, for semi-synthetic engine oil it is 7,500 kilometers, and for mineral engine oil it is 5,000 kilometers.
Was this review help?
1
3
Share
VanAustin
09/14/25 4:00am
From my daily work at the repair shop, I've observed that the recommended oil change interval for the Tayron using full synthetic oil is typically between 10,000 to 15,000 kilometers, depending on driving conditions. For instance, frequent driving in congested urban areas with slow speeds and high engine temperatures can accelerate oil degradation, possibly necessitating an earlier change at around 8,000 kilometers. Conversely, predominantly highway driving with good road conditions may allow extending the interval closer to the upper limit of 15,000 kilometers. SUVs like the Tayron prioritize durability, and full synthetic oil provides superior engine protection. However, don't rely solely on mileage—pay attention to the oil life indicator, regularly check the oil's color and level, and address it promptly if it turns black or becomes scarce. Based on my experience, changing the oil approximately every 12,000 kilometers on average strikes the best balance between cost savings and engine health.
Was this review help?
17
2
Share
Expand All
DiReese
10/28/25 4:42am
As a car owner with ten years of driving experience, I've always used fully synthetic oil for my Volkswagen Tayron. I feel it should be changed after about 12,000 kilometers, otherwise the power might drop a bit. I once tried pushing it to 15,000 kilometers, but the engine noise increased and acceleration became sluggish, so I rushed to the repair shop. Personally, I recommend referring to the user manual—the Tayron's official recommendation is roughly every 10,000 kilometers, but adjust based on your habits. For example, since I do a lot of short-distance commuting and consume oil faster, I change it earlier. The advantage of fully synthetic oil is its longevity, but don’t be too greedy about extending the interval. Regular maintenance keeps the car running smoothly. After each oil change, the test drive feels much smoother, and it helps prevent minor issues.
Was this review help?
5
5
Share
Expand All
More Forum Discussions

What to Do If the Vehicle Annual Inspection Sticker Is Lost?

Here are the steps to handle the loss of a vehicle annual inspection sticker: If the annual inspection sticker is lost, it can be reissued. Bring the original and a copy of the vehicle registration certificate and the owner's ID card to the local vehicle management office or inspection station in the city where the vehicle is registered. You will need to fill out a reissuance application form explaining the reason for the reissuance. Once approved, a new annual inspection sticker will be printed on-site. Note: In addition to the annual inspection compliance sticker, the upper right corner of the vehicle's front windshield should also display the insurance sticker and the environmental protection sticker to legally drive on the road. According to the "Road Traffic Safety Law," all vehicles on the road must display the current year's inspection sticker in a visible position on the upper right corner of the front windshield. Vehicles that fail to display the annual inspection compliance sticker as required will be penalized with a 1-point deduction and a fine of 50 yuan.
15
4
Share

How to adjust the fog lights on the Mazda3 Axela?

Mazda3 Axela fog light switch is located on the lighting switch assembly on the left side of the steering wheel, and the fog lights can be turned on or off by rotating the knob. Here is more information about fog lights: 1. The function of fog lights is to make other vehicles see your car in foggy or rainy weather when visibility is greatly affected by the weather. Therefore, the light source of fog lights needs to have strong penetration. 2. Most vehicles use halogen fog lights, and LED fog lights are more advanced than halogen fog lights. Extended content: The following is the classification of car lights: 1. Headlights. Combined headlights are located at the front of the car, mainly serving the purpose of lighting and signaling. The light emitted by the headlights can illuminate the road conditions in front of the car body, allowing the driver to drive safely at night. 2. Combined taillights. Combined taillights are located at the rear of the car, mainly serving the purpose of lighting and signaling. 3. Turn signals. Used to indicate to other road users that the vehicle is turning left or right. 4. License plate lights. License plate lights mainly illuminate the license plate, allowing people to identify the vehicle license plate at night.
19
2
Share

What is the Difference Between Power and Horsepower in Cars?

The differences between car power and horsepower mainly include the following points: 1. Different meanings. (1) Engine power refers to how fast the engine does work. The work done by the engine per unit time is called the engine's power. Corresponding to indicated work and effective work, it is called indicated power and effective power (output power), respectively. The difference between these two is called mechanical loss power. (2) Horsepower was proposed by James Watt and is a commonly used unit of power in engineering. It generally refers to metric horsepower rather than imperial horsepower. 2. Different physical meanings. (1) Power: A physical quantity that represents how fast an object does work. (2) Horsepower: It is defined that 1 metric horsepower is the work done to lift 75 kilograms-force·meters in 1 second. 3. Conversion relationships. (1) 1 kilowatt (kW) = 1.3410221 imperial horsepower (hp). (2) 1 kilowatt (kW) = 1.3596216 metric horsepower (ps). (3) 1 imperial horsepower (hp) = 1.0138697 metric horsepower (ps). 4. Different usage habits. Europe and America are accustomed to using horsepower as the unit, while China is accustomed to using metric units, which is kilowatts.
16
0
Share

How much transmission oil should be added for Mercedes-Benz C200L?

For the Mercedes-Benz C200L, the transmission oil requires 7L for manual replacement and 10L for machine replacement. The replacement interval is 60,000 kilometers. The methods for replacing the transmission oil in the Mercedes-Benz C200L are as follows: 1. Gravity replacement. Use tools to loosen the nut, and the transmission oil will automatically flow out under gravity. However, it cannot be completely drained. Not all transmission oil can be discharged due to mechanical structures with dead corners such as depressions and pits. 2. Circulation machine replacement. Store the new transmission oil inside the circulation machine, connect the transmission and the circulation machine through pipeline interfaces, and the new oil will push out the old oil under the action of the circulation machine. This method cleans the oil circuit more thoroughly. The more new transmission oil used in the circulation machine cleaning, the cleaner the old oil will be discharged. For circulation machine replacement, approximately 10-15L of oil is used each time. This method takes about 1 hour. 3. Oil pan removal for oil replacement. This method is a root cleaning method and can also clean the oil filter. It is better to use the circulation oil replacement method for changing transmission oil, as it is cleaner. Gravity oil drainage can only replace part of the oil, so circulation oil replacement is more beneficial for the transmission.
12
3
Share

How to Replace the Complete Car Lock for BYD L3?

Here is the method for replacing the complete car lock for BYD L3: 1. Clear the original key code. 2. Register the new key code. 3. Perform remote matching to complete the replacement. Below are daily precautions for car key usage: 1. Every time you exit the car, even if it's just for a few minutes, turn off the engine, remove the key, and lock the car to prevent giving thieves an opportunity. 2. Car keys should be kept waterproof, protected from severe vibrations, and kept away from magnetic interference. If the key is damaged, it also needs to be replaced. 3. Keep the spare key and the main key separate. Do not lock the spare key inside the car, especially for vehicles with one-button start or engine immobilizers, as the spare key can fully start the engine. 4. If the key is lost and cannot be matched in time, do not leave valuables in the car. Additionally, consult your insurance company about the details of compensation for vehicle theft to ensure you have the necessary evidence in case the vehicle is stolen.
1
1
Share

Is it illegal to use high beams on the highway?

Normally, using high beams on the highway is not illegal. When driving on highways without streetlights, high beams can be used to expand the driver's field of vision and avoid potential hazards. However, when encountering oncoming vehicles, it is important to switch to low beams, as high beams can dazzle the driver of the vehicle ahead, compromising road safety. Below are the correct methods for using high beams: 1. When following another vehicle, to avoid affecting the driver ahead, turn off the high beams and maintain a sufficient distance; 2. When preparing to overtake, turn off the high beams and use the overtaking signal lights to alert the vehicle ahead. After completing the overtaking maneuver, you can switch back to the original lane and resume using high beams; 3. When entering a toll station or service area, reduce speed and turn off the high beams; 4. When passing through ramp intersections, turn off the high beams, and avoid using high beams during continuous turns. Please drive at a reduced speed.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.