How many kilometers can the Emgrand New Energy vehicle run?

2 Answers
Turner
09/02/25 4:01am
Emgrand New Energy's pure electric version has a standard range of approximately 400 kilometers, while the extended range version offers about 500 kilometers. The plug-in hybrid version can travel around 61 kilometers in pure electric mode. Below is an introduction to the Emgrand New Energy vehicle: 1. The plug-in hybrid version of the Emgrand New Energy is equipped with a 1.5-liter naturally aspirated engine, which has a maximum power of 76kW and a maximum torque of 140 Nm. The engine reaches its maximum power at 6000 rpm and its maximum torque at 4400 rpm. This engine features VVT technology and uses an aluminum alloy cylinder head and block. The combined power of the electric motors paired with this engine is 114kW, with a total torque of 339 Nm, making it a dual-motor vehicle. 2. The plug-in hybrid version of the Emgrand uses a MacPherson independent suspension at the front and a torsion beam non-independent suspension at the rear. The pure electric version is a single-motor vehicle, with the motor delivering a maximum power of 120kW and a maximum torque of 250 Nm. This vehicle uses a ternary lithium battery, which is common in most pure electric vehicles. Ternary lithium batteries are lighter and have a higher energy density, making them very suitable for pure electric household vehicles.
Was this review help?
17
1
Share
DeLilliana
09/14/25 6:13am
I've been driving the Emgrand EV400 pure electric vehicle for two years now, and I have deep feelings about its range. The official claim is around 400 kilometers, but in daily driving, it fluctuates around 350 kilometers. It's generally sufficient for urban commuting. My daily round-trip commute is 60 kilometers, so one charge lasts me four to five days. However, driving habits significantly impact the range—rapid acceleration or high-speed driving consumes more power, especially in winter when low temperatures and heating use can drop the range to just over 300 kilometers. Charging-wise, a home slow charger fills it up overnight, while a fast charger can replenish half the range in about 30 minutes. For battery maintenance, it's recommended not to keep it fully charged or completely drained for long periods; charging to 80%-90% each time is ideal. For long trips, planning charging stops is essential to avoid range anxiety. Overall, it feels reliable and cost-effective, making it suitable for medium to short-distance users.
Was this review help?
14
5
Share
Expand All
More Forum Discussions

Should You Use Internal or External Air Circulation for Car Defogging?

For car defogging, use external air circulation. When fog appears on the windshield, the quickest method is to first adjust the air vents to the front windshield, turn on the cooling function, and with external circulation activated, the fog on the glass can be blown away in about ten seconds at maximum fan speed. When to use internal circulation: When the outside air quality is poor or heavily polluted, such as on dusty roads, in congested traffic, or near chemical plants with foul odors or unpleasant smells; use internal circulation to prevent bad outside air from entering the car. In summer, to quickly lower the interior temperature using the air conditioning, internal circulation can be used. In winter, using internal circulation can keep the car warmer. When to use external circulation: When internal circulation has been used for a long time and opening the windows is inconvenient, periodically switch to external circulation to allow fresh air into the car. When there are many passengers in the car, using external circulation helps maintain fresh air and prevents excessive humidity inside the car, which can cause window fogging. Related information about internal and external circulation: Internal circulation: Air circulates only inside the car without exchanging with outside air. Internal circulation blocks polluted air by closing the airflow channels between the inside and outside of the car, effectively preventing external dust and harmful gases from entering. External circulation: The car's interior air is connected to the outside air, with outside air flowing in through the front air intake and out through the rear exhaust. External circulation replenishes fresh air. However, when driving in congested city traffic, the car may fill with exhaust fumes, which is a result of using external circulation.
2
5
Share

What does the yellow bulb with exclamation mark on the dashboard mean?

Yellow bulb with exclamation mark: This is the lighting fault indicator, indicating that there is a fault with one of the vehicle's lights. Solution: Visit a 4S shop for inspection and repair as soon as possible. Alternatively, you can perform a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting, to identify the problematic area. The exclamation mark is a common fault indicator in vehicles. Besides the yellow bulb with an exclamation mark, there are four other forms of exclamation mark indicators: an exclamation mark inside a triangle, an exclamation mark inside a yellow gear, an exclamation mark inside a circle with brackets, and an exclamation mark with a horizontal line under brackets. Below is a detailed analysis: General Fault: An exclamation mark inside a triangle. If this symbol lights up, it indicates a fault with the vehicle's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: An exclamation mark inside a yellow gear. This is the automatic transmission fault warning light, indicating a fault with the transmission or that the transmission lubricant is below the normal range. Transmission oil should be replaced promptly. Brake System Fault: An exclamation mark inside a circle with brackets. This represents a brake system warning, mainly indicating a fault with the brake system or low brake fluid level. Immediate inspection and repair of the brake system are required to avoid accidents. Tire Pressure Anomaly: An exclamation mark with a horizontal line under brackets. This represents the tire pressure monitoring warning light, which lights up when the vehicle's tire pressure is too low. Check the tire pressure and restore it to the normal range.
10
0
Share

How to Handle 12-Point Deduction for Novice Driver's License?

Novice drivers who accumulate 12 penalty points face two scenarios: revocation of driving privileges or retaking the subject one exam. Below are the details: For novices still within the probationary period: Accumulating 12 points during this period will result in revocation of driving privileges, requiring reapplication to a driving school. For novices who have completed the probationary period: The driver must report to the traffic management department of the public security authority at either the license issuance location or the violation occurrence location within 15 days. They will undergo a seven-day education program on road traffic safety laws, regulations, and related knowledge. Upon passing the exam, the driver's license will be reinstated.
7
5
Share

How to Solve the Issue of Increased Engine Oil in Honda CR-V?

Honda has proposed four recall measures for the affected CR-V models: FI-ECU software upgrade; replacement of the air conditioning control unit; TCU software upgrade (CVT models only); replacement of the radiator lower hose assembly (CVT models only). Additional information is as follows: Definition: The Honda CR-V is a classic urban SUV model produced by Dongfeng Honda Automobile Company. The 2015 CR-V features a sporty and fashionable design, paired with Michelin Latitude series SUV tires, offering excellent handling performance. Key Advantages: Fashionable and dynamic exterior design with smooth, rounded yet sporty lines; improved materials and craftsmanship; decent configuration; powerful performance; flexible handling; high cost performance.
4
2
Share

How Many Kilometers Should the Engine Throttle Be Cleaned?

It is generally recommended to clean the throttle every 20,000 to 40,000 kilometers. If driving on extremely poor road conditions, it is advisable to clean it every 15,000 kilometers. The specific cleaning interval should be determined based on the frequency of vehicle use, the air environment, the type of engine oil used, the interval of filter replacement, and driving habits. Methods to determine if the throttle needs cleaning: Put the car in neutral, rev the engine to 3,000 RPM, and then suddenly release the throttle. Observe the tachometer needle at this time. If the needle quickly drops to 800 RPM or even below 700 RPM and then slowly rises back to around 800 RPM, with the idle speed fluctuating from low to high, it indicates severe dirt buildup in the throttle, requiring immediate cleaning. Throttle cleaning methods: 1. Disassembly and cleaning method: Remove the entire throttle, prepare carburetor cleaner, spray and clean thoroughly, then blow dry with compressed air. 2. Non-disassembly cleaning: Directly spray throttle cleaner on a cloth and wipe the throttle. The entire process does not require disassembling the throttle assembly, making it relatively simple and convenient. However, this method is only suitable when there is minimal dirt buildup. If there is significant dirt, disassembly is still necessary for thorough cleaning.
19
0
Share

How to Change Lanes Before an Intersection?

When changing lanes before an intersection, you should enter the desired lane within the dashed line area following the guidance of directional arrows. Below are additional details: At intersections with marked directional lanes: Enter the directional lane according to your intended direction of travel. When preparing to enter a roundabout: Yield to vehicles already inside the roundabout. When making a left turn: Turn from the left side of the intersection center point, activate the turn signal during the turn, and use low beams when driving at night. When encountering a green light: Proceed through the intersection in order. When encountering a red light: Stop in order behind the stop line; if there is no stop line, stop before entering the intersection.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.