How many kilometers can a car travel in one hour at 120 km/h?

What does TSI stand for in cars?

TSI stands for Turbocharged Stratified Injection technology by Volkswagen. Here are specific introductions to common faults in car turbocharging: 1. Turbocharger oil leakage fault: High oil consumption but normal exhaust color with no power loss. Generally caused by oil seepage. 2. Compressor end oil leakage: High oil consumption with blue exhaust smoke but no power drop. Caused by oil entering the combustion chamber through the engine intake pipe due to compressor end leakage. 3. Excessive wear between piston and cylinder: High oil consumption with blue or black exhaust smoke and power reduction. Caused by oil entering the combustion chamber due to excessive wear between piston and cylinder. 4. Excessive bearing wear: Metal friction sound from turbocharger. Black exhaust smoke, power reduction, and abnormal noise from turbocharger. Possibly caused by excessive wear of turbocharger rotor bearings or thrust bearings, resulting in impeller friction against the turbocharger housing.

17

0

Share

How to Put the Power Mode of Haval H6 into ON Position?

Press the start button without stepping on the brake pedal to put the power mode of Haval H6 into the ON position. If you press the start button while stepping on the brake pedal, the engine will start directly. The ON position of Haval H6 corresponds to the power mode where the vehicle dashboard lights up, but the engine does not start. Additional Information: 1. Function of the ON Position: In a car, the ON position means that after switching to this position, it provides power support to all electronic devices in the car. Simply put, this function connects all the car's electrical appliances to the battery. 2. Car Ignition Switch: The car ignition switch has four positions: START, ON, ACC, and LOCK. LOCK can secure the steering wheel; ACC can turn on some electrical components, such as the radio; ON connects all electrical components in the car, and this is the position during normal driving; START is the position for ignition when starting the engine.

14

5

Share

What to Do If There is a Crack on the Car's Windshield?

If there is a crack on the windshield, it should be replaced promptly. Here are some maintenance methods for the windshield: 1. Windshield Coating: The primary function of windshield coating is to maintain the transparency of the glass, preventing the formation of an oily layer while driving. Secondly, it enhances the water-repellent effect of the car glass. During rainy weather, as the vehicle moves forward, rainwater tends to stay on the windshield, which also benefits the driver by improving driving safety. 2. Using Specialized Windshield Washer Fluid: Purchased windshield washer fluid needs to be diluted before use. Additionally, when adding the fluid, ensure not to overfill. Typically, the capacity of car windshield washer fluid is about 1.5L, so choose a dilution solution between 1.25L and 1.5L.

20

0

Share

What are the causes of excessive oil pressure?

Causes of excessive oil pressure: 1. The oil viscosity is too low; 2. The oil strainer screen or oil filter element is clogged; 3. The pressure relief valve or return valve spring has weakened or broken, or the valve sealing surface is not tight, causing oil leakage and pressure relief; 4. The main bearing or connecting rod bearing clearance is too large; 5. The oil pump is not working properly. When encountering excessive oil pressure, first use the oil dipstick to take out oil from the crankcase and feel it by hand to check if the oil viscosity is too high. If there is no abnormality, then check if the pressure relief valve or pressure relief spring in the oil pump cover is too strong. Clean and adjust the pressure relief valve according to specifications. If all the above are in good condition, check whether the main oil passage in the cylinder block is blocked or whether the oil pressure gauge or sensor is short-circuited.

3

1

Share

How to Deal with a Damaged Transmission Housing?

Methods for handling a damaged transmission housing: If there is damage on the joint end face of the housing, an appropriately thickened paper gasket should be added to the damaged area. If oil leakage persists, welding repair should be performed. If the sealing paper gasket is damaged, it should be replaced with an identical one. If the cover screws are loose, they should be tightened promptly. An automatic transmission is a gear-shifting device that can automatically change gears based on the vehicle's speed and engine RPM, with its core function being to achieve automatic gear shifting. Below is relevant information about automatic transmissions: 1. Types: There are three common types of automatic transmissions in vehicles, namely AT transmissions, dual-clutch transmissions, and CVT transmissions. Dual-clutch transmissions are products developed based on manual transmissions. 2. AT Transmission: AT transmissions can also be referred to as torque converter transmissions, as they are connected to the engine via a torque converter. 3. CVT Transmission: CVT transmissions are a type of automatic transmission with a relatively simple internal structure, consisting of only two cone pulleys and a steel belt inside.

18

1

Share

Why does the Haval H6 suddenly fail to start?

Here are the specific reasons why the Haval H6 suddenly fails to start: 1. Carbon deposits in the engine causing ignition difficulties: Accompanied by slight shaking at idle, cleaning the throttle and fuel injectors can resolve the issue. 2. Weak ignition energy from the spark plugs: Failure to replace the spark plugs after the maintenance cycle leads to a significant drop in ignition energy, causing misfires in severe cases. 3. Insufficient fuel line low pressure: Low oil pressure in the low-pressure fuel line directly results in the engine requiring a second ignition. Specific checks can be performed on the fuel pressure regulator, fuel pump, fuel filter, and internal pipelines. 4. Battery depletion: Jump-starting the car using another vehicle or battery can solve the problem. 5. Incorrect engine timing: Mismatched engine timing can cause difficulties in starting. Certain models may experience timing belt misalignment when replacing the generator belt, leading to ignition problems.

2

5

Share

How many kilometers can a car travel in one hour at 120 km/h?

What does TSI stand for in cars?

How to Put the Power Mode of Haval H6 into ON Position?

What to Do If There is a Crack on the Car's Windshield?

What are the causes of excessive oil pressure?

How to Deal with a Damaged Transmission Housing?

Why does the Haval H6 suddenly fail to start?

What is the standard for free replacement of Lexus NX brake pads?

What is the container for windshield washer fluid called?

What is the reason for the automatic folding failure of Mercedes-Benz mirrors?

How to check the fuel consumption of the 2021 Geely Binrui?