How many hours of practice are required for Subject 3 before taking the test?

1 Answers
AaronFitz
07/30/25 6:37am
Subject 3 requires 24 hours of practice before taking the test. According to relevant regulations, during the validity period of the driving skill test permit, the number of scheduled tests for Subject 2 and Subject 3 road driving skills must not exceed five times. If the fifth scheduled driving test is still failed, the results of other subjects that have been passed will be invalidated. Notes for Subject 3 test: 1. The Subject 3 test requires driving on the road with many uncertainties, so make sure the car door is securely closed and the seat belt is fastened; 2. When performing the roadside parking operation, it is better to park a bit farther than to run over the curb; 3. For safety reasons, always check for oncoming traffic before opening the door when getting out of the car.
Was this review help?
9
3
Share
More Forum Discussions

How often should the original spark plugs of the Emgrand be replaced?

Emgrand's original spark plugs should be replaced every 80,000 to 100,000 kilometers. Spark plugs are a crucial component of the gasoline engine's ignition system. They introduce high voltage into the combustion chamber and generate a spark by jumping the electrode gap, thereby igniting the combustible air-fuel mixture in the cylinder. The key part of a spark plug is the insulator. If the insulator fails, the high voltage will "take a shortcut" and bypass the electrodes to ground, resulting in no spark. The Emgrand is a car under the Geely brand, which is a subsidiary of Geely Auto. The new Emgrand is equipped with a 1.3T GeTec DVVT turbocharged engine and features front-wheel drive.
20
0
Share

How to Determine the Condition of a Charcoal Canister Solenoid Valve?

Methods to determine the condition of a charcoal canister solenoid valve: 1. Unplug the solenoid valve's connector. If the suction stops, it indicates the solenoid valve is functioning normally. If suction continues, it means the solenoid valve is stuck in the open position. 2. Start the engine and let it idle. Remove the pipe connected to the fuel tank. You should feel suction at the charcoal canister's connector. If there is no suction, it indicates the solenoid valve is stuck in the closed position. The charcoal canister is typically installed between the fuel tank and the engine. Since gasoline is a highly volatile liquid, the fuel tank often contains vapors at normal temperatures. The fuel evaporation emission control system is designed to direct these vapors into the combustion process and prevent them from escaping into the atmosphere. The activated charcoal canister storage device plays a crucial role in this process.
2
1
Share

Can a New Car Be Returned If It Cannot Be Registered?

Whether a new car that cannot be registered can be returned depends on the actual situation. Here are the relevant details: 1. Quality: If the new car has quality issues and fails the inspection during the registration process, leading to the inability to register, the 4S store is responsible for returning or replacing the car; 2. Incomplete documentation: If the inability to register is due to incomplete documentation caused by the 4S store's negligence, the store must either complete the required documents or return/replace the vehicle; 3. Personal reasons: If the new car cannot be registered solely due to the owner's personal reasons, the 4S store generally will not agree to return or replace the car, as businesses are unlikely to bear losses to compensate for the owner's own mistakes.
17
2
Share

Where is the Sylphy engine produced?

The Sylphy engine is a joint-venture engine produced by Dongfeng Nissan. The engine model of the new Sylphy is HR16, which includes 1.6L and 1.8L CVVT engines. The dimensions of the new Sylphy are 4641mm in length, 1815mm in width, and 1450mm in height, with a wheelbase of 2712mm, classifying it as a compact sedan. The new Sylphy is equipped with a four-cylinder naturally aspirated engine, delivering a maximum horsepower of 139 HP, a maximum power of 102 KW, and a maximum torque of 169 NM. It comes with a 5-speed manual transmission or a CVT continuously variable transmission. The front suspension is a MacPherson independent suspension, while the rear suspension is a torsion beam non-independent suspension. The interior is available in black, beige, and black-brown color schemes, and features a flat-bottom multifunction steering wheel.
17
4
Share

What kind of transmission does the Tang fuel version use?

The Tang fuel version uses a 6-speed automatic manual transmission. More information about the Tang fuel version is as follows: 1. Power configuration. This car is equipped with a 2.0T turbocharged engine, and the transmission system configuration is a 6-speed automatic manual transmission that matches the engine. The transmission used in this car is produced by Hyundai Powertech. It has an ECO energy-saving mode, and during the driving process, you can use both manual mode and automatic mode. 2. Although this transmission does not have a significant advantage in terms of gear count, its technology is very reliable, and the transmission effect is excellent. During driving, the gear shifts are smooth, with almost no noticeable jerking, which to some extent enhances the driving comfort of the car. 3. An automatic manual transmission refers to a transmission that has both manual and automatic modes, allowing for both manual and automatic gear shifting. During the driving process, the two modes can be switched at will.
14
0
Share

Do LED headlights require a ballast?

Most LED headlights do not require a ballast, but in practice, it is necessary to analyze based on the specific vehicle model. For example, the LED bulbs of the Teana come with a built-in ballast, so replacing the LED bulbs also requires replacing the ballast. The principle of the ballast: it instantly converts 12V current into high voltage and maintains stable high voltage. This high-intensity voltage is used to activate the HID bulb to produce strong light between the two electrodes, achieving high-brightness illumination. The functions of the ballast: 1. It has a cold-start current of less than 6.5A, ensuring fast startup; 2. It features a wide-voltage design, ensuring normal startup under both low and high voltage conditions.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.