How many hours of driving at night is considered fatigued driving?

1 Answers
Jenna
07/30/25 6:40am
Four hours of driving at night is considered fatigued driving. Definition of fatigued driving: According to Article 62, Paragraph 7 of the "Regulations for the Implementation of the Road Traffic Safety Law" in China, driving a motor vehicle continuously for more than four hours without stopping to rest or resting for less than 20 minutes is considered fatigued driving. Penalties for fatigued driving: Driving large or medium-sized passenger vehicles or vehicles transporting hazardous materials will result in a fine of 200 yuan and 12 penalty points; driving non-large or medium-sized passenger vehicles or vehicles not transporting hazardous materials will generally result in a fine of 200 yuan and 6 penalty points; if a major traffic accident occurs due to fatigued driving, violating criminal law, the driver will bear corresponding criminal responsibility.
Was this review help?
9
0
Share
More Forum Discussions

What are the reasons for a car not starting while driving?

The reasons for a car not starting while driving are: 1. Incorrect gear position; 2. Steering wheel lock; 3. Weak key battery; 4. Clogged spark plugs. The solutions for a car not starting while driving are: 1. Straighten the steering wheel and then start the car; 2. Clean the throttle body, fuel injectors, and carbon deposits in the intake tract; 3. Check the ignition system and fuel supply system; 4. Regularly replace wear-prone components. The steps to start a car are: 1. Insert the key and turn it to the ACC position to unlock; 2. Turn to the ON position and wait for a few seconds to allow the vehicle to connect to partial power and prepare; 3. When starting the vehicle, turn to the START position and release after 3 seconds.
14
2
Share

What are the body dimensions of the Kia Carnival?

The body dimensions of the Kia Carnival are: length 4930 mm, width 1895 mm, height 1760 mm, with a wheelbase of 2910 mm. The Kia Carnival is a 5-door, 7-seater MPV, equipped with a 2.2T inline 4-cylinder turbocharged engine, delivering a maximum power of 147 kW. The engine reaches its maximum power at 3800 rpm, and the maximum torque is available between 1750 to 2750 rpm. It is paired with a 6-speed automatic transmission. The Kia Carnival features front-wheel drive, with a MacPherson strut independent front suspension and a multi-link independent rear suspension.
7
2
Share

What is the purpose of the motor vehicle electronic identification?

Motor vehicle electronic identification is used to achieve vehicle identity recognition and dynamic monitoring in high-speed motion states, along with traffic flow monitoring, and to promote intelligent urban traffic management. Motor vehicle electronic identification, also known as the electronic ID card for vehicles, stores license plate number information in a radio frequency tag, enabling automatic, non-contact, and non-stop vehicle identification and monitoring. The working principle of motor vehicle electronic identification is as follows: when passing through checkpoints, major intersections, or locations equipped with roadside units, the ultra-high frequency electromagnetic waves emitted by the card reader are received by the electronic license plate, converted into electrical energy to activate the chip. After verifying the identity of the card reader and other information, the chip sends the required data back to the card reader, which then transmits this information to the command center.
11
2
Share

How many kilometers are required for Subject 3 test?

Subject 3 requires a mileage of 270 kilometers before you can schedule the test. Subject 3 includes the road driving skills test and the safety and civilized driving knowledge test, which are part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safety and civilized driving knowledge test subjects in the motor vehicle driver's test. The content of the road driving skills test varies for different types of vehicles eligible for driving. Subject 3 test content: The road driving skills test for Subject 3 generally includes: preparation before getting on the car, light simulation test, starting, driving in a straight line, shifting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and driving at night. There are three deduction standards in the Subject 3 test, deducting 5 points, 10 points, or 100 points. The different deduction standards are as follows: Deduct 100 points: Before stopping, not observing the traffic behind and to the right through the interior and exterior rearview mirrors; After the examiner issues the instruction to pull over, failing to stop within the specified distance; After stopping, the vehicle body exceeds the right edge of the road or the edge of the sidewalk; After stopping, not turning your head to observe the traffic behind and to the left before opening the door; Not closing the door after getting out of the car. Deduct 10 points: After stopping, the vehicle body is more than 30cm away from the right edge of the road or the edge of the sidewalk; After stopping, not tightening the parking brake; Releasing the foot brake pedal before tightening the parking brake. Deduct 5 points: Not turning off the engine before getting out of the car.
10
4
Share

Why does the Baojun 510 automatic transmission sometimes fail to engage gears?

Possible causes include abnormalities in the release bearing or shift fork shaft. Release bearing working principle: The clutch release bearing is installed between the clutch and the transmission. The release bearing housing is loosely fitted on the tubular extension of the transmission's first shaft bearing cover. A return spring ensures the shoulder of the release bearing always presses against the release fork and retracts to the rearmost position, maintaining a gap of approximately 3-4mm with the end of the release lever (release fingers). Shift fork shaft working principle: The shift fork is a device that pushes the sliding gear. The sliding gear has a ring groove where the shift fork sits. When the driver operates the gear lever, it drives the shift fork shaft, which moves the shift fork, and the shift fork then pushes the gear to achieve gear shifting.
16
5
Share

Where is the oil dipstick located on the BMW 525?

The BMW 525 does not have an oil dipstick. You can check the oil level on the dashboard inside the cabin. The functions of engine oil are: 1. Reducing friction and high temperatures; 2. Cooling and temperature reduction; 3. Cleaning and purifying; 4. Shock absorption and cushioning; 5. Rust and corrosion prevention. Taking the BMW 525 2021 Sport Package as an example, its body dimensions are: length 5106mm, width 1868mm, height 1500mm, wheelbase 3105mm, and fuel tank capacity 68 liters. The BMW 525 2021 Sport Package is equipped with a 2.0T turbocharged engine, with a maximum power of 135kW and a maximum torque of 290Nm, paired with an 8-speed automatic transmission. The front suspension uses a double-wishbone independent suspension, and the rear suspension uses a multi-link independent suspension.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.