How Many Days Does It Take to Check for Traffic Violations?

1 Answers
Janice
07/29/25 9:02am
Generally, it takes 3 to 7 days to check for traffic violations after they occur, as the traffic police team needs to input and verify the information. The latest it should take is no more than 13 working days. Methods to Handle Traffic Violations: The vehicle owner must bring their driver's license and vehicle registration certificate to the traffic police brigade or comprehensive management office at the location of the violation or where the vehicle is registered. If the violation does not involve point deductions, the fine can be paid directly at an ICBC self-service payment machine or online. For violations occurring in a different location, it is best to handle them at the traffic police brigade in the area where the violation occurred to avoid the issue of the violation record not being cleared if processed locally. After the vehicle owner pays the fine, data exchange between the traffic police brigade and the bank occurs approximately once a week, so it usually takes about a week for the violation record to show as "processed." Time Limits for Traffic Violations: For on-site violations, payment must be made within 15 days. For non-on-site violations, they can be handled before the vehicle's annual inspection. If a vehicle is parked in a no-parking zone and receives a ticket from the traffic police, this can also be temporarily left unprocessed and handled together before the vehicle inspection.
Was this review help?
18
2
Share
More Forum Discussions

What maintenance items are needed at 100,000 kilometers?

After driving 100,000 kilometers, it is necessary to clean the carbon deposits in the engine, replace the spark plugs, belts, engine oil, coolant, transmission fluid, brake fluid, power steering fluid, etc. The maintenance items for a car at 100,000 kilometers are relatively extensive, mainly involving the replacement of wear-prone parts and fluids. Here are the relevant details: 1. Brake Disc Replacement: Wear-prone parts on a car include belts, spark plugs, ignition coils, brake pads, brake discs, wipers, various filters, and tires. The fluids in a car include brake fluid, engine oil, coolant, transmission fluid, and power steering fluid. After driving 100,000 kilometers, the brake discs need to be replaced. If the remaining thickness of the brake pads is insufficient, they should also be replaced. 2. Tire Replacement: If the tires have never been replaced, they should be changed as well. Tires are rubber products and will age over time. It is recommended to replace tires every four years, even if the mileage is low during that period. 3. Transmission Fluid Replacement: When replacing the transmission fluid, use the circulation machine method and purchase original transmission fluid. Brake fluid is highly prone to absorbing moisture. If the brake fluid has a high water content, it can lead to reduced braking force and longer stopping distances.
16
0
Share

Can ETC cards in cars be stolen and swiped?

If the ETC card inserted is a regular bank card with ETC functionality, there is a possibility of unauthorized swiping. 1. Currently, there are three types of ETC cards: The first type is the single-purpose ETC card issued earlier by the transportation industry, which has ceased to be issued. The second type is a debit card jointly issued by the transportation industry and banks, where customers hold a single-purpose ETC card and a bank card. The third type is a co-branded card jointly issued by the transportation industry and banks, integrating ETC functionality into a regular bank card. 2. The first two types of cards do not pose any risk of unauthorized swiping. Only the third type of card, if it has UnionPay's "QuickPass" feature and has enabled the "No Password" and "No Signature" services, carries the risk of unauthorized swiping. However, simply notifying the issuing bank to disable the "No Password and No Signature" feature can prevent further unauthorized swiping. 3. In response to incidents of unauthorized swiping in some areas, the Ministry of Transport issued a notice urging ETC issuing service agencies and partner banks to immediately stop issuing "two-in-one" co-branded cards. If users genuinely require such cards, the "QuickPass" and "Small Amount No Signature No Password" services should be disabled by default upon issuance.
9
4
Share

What are the requirements for BYD vehicle replacement?

BYD vehicle replacement requires the following conditions: 1. Complete replacement procedures; 2. The mileage has not reached the scrapping limit; 3. The exhaust emissions must meet standards; 4. The vehicle must not have any violations or modifications. BYD models include: BYD Yuan, BYD Song, BYD Tang, BYD Qin EV300, BYD Qin, BYD S7, BYD S6, etc. Taking the BYD Song 2021 Classic Edition Manual Comfort as an example, its body dimensions are: length 4600 mm, width 1830 mm, height 1700 mm, wheelbase 2660 mm, and fuel tank capacity 60 liters.
4
3
Share

What is the method for replacing an oil filter?

The method for replacing an oil filter is as follows: 1. Remove the drain plug to drain the engine oil; 2. Clean the drain plug and tighten it; 3. Use an oil filter wrench to loosen and remove the oil filter; 4. Apply engine oil to the O-ring of the new oil filter; 5. Screw on the new oil filter. Precautions for replacing the oil filter include: 1. Use an oil filter wrench or appropriate tools when removing the oil filter to prevent damaging the threads of the connecting part; 2. The oil and oil filter should be replaced simultaneously to help extend the engine's service life; 3. Do not overtighten the filter to avoid damaging the sealing gasket.
16
2
Share

What are the Toyota compact car models?

Toyota currently offers four compact car models for sale: Vios, Vios FS, YARiS L Zhi Xuan, and YARiS L Zhi Xiang. The detailed information of these four models is as follows: 1. Vios: It comes with two powertrain options: a 1.3-liter inline 4-cylinder naturally aspirated engine paired with either a 5-speed manual or CVT transmission, delivering a maximum power of 73KW and a maximum torque of 123N·m; and a 1.5-liter inline 4-cylinder naturally aspirated engine paired with either a 5-speed manual or CVT transmission, delivering a maximum power of 79KW and a maximum torque of 140N·m. 2. Vios FS: The Vios FS is essentially the same as the Vios, both being models under FAW Toyota, with the difference being that the Vios FS is a hatchback while the Vios is a sedan. 3. YARiS L Zhi Xuan: In terms of powertrain, it is equipped with a 1.5-liter inline 4-cylinder naturally aspirated engine paired with either a 5-speed manual or CVT transmission, delivering a maximum power of 81KW and a maximum torque of 138N·m. 4. YARiS L Zhi Xiang: The YARiS L Zhi Xiang is essentially the same as the YARiS L Zhi Xuan, both being models under GAC Toyota, with the difference being that the YARiS L Zhi Xuan is a hatchback while the YARiS L Zhi Xiang is a sedan.
13
5
Share

What Causes Lithium Batteries to Catch Fire?

Lithium batteries catch fire due to separator damage or excessive temperature. There are two common types of lithium batteries: lithium iron phosphate (LiFePO4) batteries and ternary lithium batteries. These two types of batteries have different cathode materials. Lithium iron phosphate batteries have better safety performance and will only combust at temperatures around 800°C. Ternary lithium batteries are less safe compared to lithium iron phosphate batteries and can combust at temperatures as low as 200°C. All lithium batteries contain a separator inside, which allows lithium ions to pass through but blocks electrons. This forces electrons to travel through the external circuit, thereby generating electric current in the external circuit.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.