How many days after applying window film can you roll down the windows?

1 Answers
AlinaMarie
07/30/25 7:34am
After the car window tinting is completed, you should wait 3 days in summer and 7 days in winter before rolling down the windows. Here are some precautions after car window tinting: 1. Parking matters: When parking, choose a sunny location to ensure sufficient evaporation of moisture inside the window film. 2. Car washing matters: Do not wash the car within three days after tinting to avoid potential film peeling caused by water. Therefore, it's recommended to wash the car before applying the film. 3. Installation matters: If there are stains on the window film, never use sharp objects to scrape or harsh chemical solvents to wipe. It's advised to gently clean with a clean damp towel, sponge, or other soft materials.
Was this review help?
1
5
Share
More Forum Discussions

What details should be paid attention to when replacing spark plugs?

Details to pay attention to when replacing spark plugs: Open the hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. When removing them, check for external debris such as leaves or dust and ensure they are thoroughly cleaned. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns before using the socket to fully tighten them. Reinstall the removed high-voltage distributor wires according to the firing order, then secure the cover. Spark plug replacement interval: Under normal maintenance conditions, spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is recommended to follow the owner's manual. The following standards can be referenced for maintenance replacement: platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers.
12
0
Share

Does Using Toothpaste to Wash a Car Damage the Paint?

Using toothpaste to wash a car can damage the paint. This is because toothpaste contains abrasives, which can wear down the car paint to some extent. However, toothpaste can be used to repair minor scratches and dents on the car's paint surface, with noticeable results. When washing your car, avoid using hard-textured towels. Using stiff towels or cloths, especially without rinsing off dirt from the car's surface, can easily scratch the paint. It's best to use soft-textured towels or cloths for washing. Additionally, avoid washing your car under direct sunlight, as dust or dirt particles in the air can settle on the paint, causing secondary damage. Moreover, water droplets left on the car's surface can act as magnifying lenses under sunlight, potentially damaging the paint over time due to intense light refraction. Lastly, when using a high-pressure water gun, it's advisable to wash the car from top to bottom. This method helps to effectively rinse away impurities from the car's surface.
8
3
Share

The Difference Between Locomotive and Motorcycle

There is no difference between locomotive and motorcycle; both refer to two-wheeled or three-wheeled motor vehicles. The term 'locomotive' is used in Taiwan. These two terms mean the same thing and refer to the same object. People in different regions have different names for it. Introduction to Motorcycles: A motorcycle is a two-wheeled or three-wheeled vehicle powered by a gasoline engine, with handlebars to steer the front wheel. It is lightweight, flexible, and fast, widely used for patrols, passenger and cargo transport, etc. Classification of Motorcycles: According to engine displacement and maximum design speed, motorcycles are divided into mopeds and motorcycles. A moped has an engine displacement of no more than 50 milliliters and a maximum design speed of no more than 50 kilometers per hour. A motorcycle refers to a two-wheeled or three-wheeled vehicle with an engine displacement greater than 50 milliliters and a maximum design speed exceeding 50 kilometers per hour.
2
1
Share

Are Vehicle Annual Inspections Closed on Holidays?

Vehicle annual inspections are not closed on holidays. According to Article 15, Item 3 of the "Opinions on Strengthening and Improving Motor Vehicle Inspection Work": inspection institutions should implement a non-stop system on weekends and holidays, providing extended inspection services. Specific regulations for vehicle annual inspections: According to Article 16 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China": micro and small non-operating passenger vehicles must undergo inspection once every 2 years within 6 years from the date of motor vehicle registration; vehicles over 6 years old must be inspected once every year; vehicles over 15 years old must be inspected once every 6 months. Vehicle annual inspections can only be conducted in advance, not delayed: According to relevant laws and regulations, the owner of a motor vehicle can apply for an inspection compliance mark at the vehicle management office of the registration location within three months before the expiration of the motor vehicle inspection validity period. If the annual inspection is overdue and the vehicle is still driven on the road, the owner will be penalized with 3 demerit points and a fine if caught by traffic police.
20
4
Share

What are the symptoms of damaged car valves?

Damaged car valves can cause issues such as incomplete sealing of the intake and exhaust passages, black smoke from the engine exhaust, and incomplete exhaust. A fault diagnostic tool can be used to perform throttle valve inspection by observing the data stream. If the throttle opening is too large, cleaning is necessary; if the throttle is confirmed to have a permanent fault, replacement is required. Throttle valves generally cannot be disassembled for repair and must be replaced as an assembly. Incomplete sealing of intake and exhaust passages: Damaged valves can cause incomplete sealing of the intake and exhaust passages, leading to engine air leakage, reduced cylinder pressure, decreased power, and increased fuel consumption. Black smoke from the engine exhaust pipe: In severe cases, it can also cause black smoke from the engine exhaust, air filter blow-by, and difficulty starting. Incomplete exhaust: This can shorten the lifespan of spark plugs and cause abnormal noises from the valves.
20
2
Share

What does the parts-to-whole ratio coefficient mean?

The parts-to-whole ratio coefficient refers to the ratio between the price of parts and the sales price of the whole vehicle. Specific meaning of the parts-to-whole ratio coefficient: The parts-to-whole ratio refers to the sum of the prices of all vehicle parts divided by the sales price of the whole vehicle, multiplied by 100%, resulting in a percentage coefficient. A high parts-to-whole ratio coefficient indicates high vehicle repair costs, which will directly affect future insurance premium prices. Function of the parts-to-whole ratio coefficient: The parts-to-whole ratio coefficient serves to safeguard consumers' right to know and protect their legitimate rights by making repair prices more transparent. It provides a relatively scientific reference value for pricing in both the insurance and repair industries.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.