How many colors are available for the 2019 Sagitar?

1 Answers
SanVivienne
07/30/25 9:16am
The 2019 Sagitar offers a total of eight body colors: Polar White, Roman Red, Crystal Silver, Gravel Gray, Manganese Black, Storm Blue, Pacific Blue, and Seashell Gold. In terms of exterior design, it adopts Volkswagen's new family design language, featuring a large-sized front grille that seamlessly integrates with the LED headlights on both sides. The addition of silver chrome accents enhances the front fascia's recognition and visually widens the overall appearance, adding a sporty atmosphere to the vehicle. Under the hood, the 2019 Sagitar is equipped with either a 1.2T turbocharged engine or a 1.4T turbocharged engine. The 1.2T turbocharged engine delivers a maximum power of 85 kW, while the 1.4T turbocharged engine produces a maximum power of 110 kW. The transmission options include a 5-speed manual or a 7-speed dual-clutch gearbox.
Was this review help?
10
3
Share
More Forum Discussions

How to Connect Bluetooth for Music Playback in a Chevrolet?

Connecting Bluetooth is as follows: 1. Before connecting Bluetooth, first locate the Bluetooth option on the infotainment screen's operation interface. 2. Turn on Bluetooth and set it to be discoverable by nearby devices. 3. Enable Bluetooth on your phone, search for the car's Bluetooth, and then click to pair and connect. More related information is as follows: 1. After connecting your phone to the car's infotainment system via Bluetooth, you can play music from your phone and also use the car's system to answer calls. Connecting your phone to the car's system via Bluetooth enables many convenient features. However, with technological advancements, car infotainment systems have become more feature-rich and complex, and the ways to connect phones to these systems have diversified. 2. The most common methods for connecting phones to car systems are not Bluetooth but Carlife and CarPlay. These systems allow Android phones and iPhones, respectively, to connect to the car's system. Once connected via Carlife or CarPlay, you can navigate, listen to music, make and receive calls, send text messages, and even use voice assistants to control the car's system. However, connecting your phone to the car's system via Carlife or CarPlay requires the use of a data cable.
7
5
Share

How to Turn on the Headlights of Ford Mondeo?

Ford Mondeo headlights can be turned on as follows: The headlight switch of Ford Mondeo is located on the lighting switch assembly on the left side of the steering wheel. Pushing it towards the instrument panel turns on the high beams, while twisting it turns on the low beams. Additional information: 1. Car headlights, also known as car front lights or car LED daytime running lights, are closely related to safe driving at night or under adverse weather conditions. 2. Below is the classification of car lights: 1. Headlights, combined headlights are located at the front of the car, mainly serving the purpose of illumination and signaling. The light emitted by the headlights can illuminate the road conditions ahead of the car body, enabling the driver to drive safely at night. 2. Combined taillights, combined taillights are located at the rear of the car, mainly serving the purpose of illumination and signaling. 3. Turn signals, used to indicate left or right turns to other road users. Regulations require them to be amber in color. 4. License plate lights, mainly used to illuminate the license plate, allowing people to identify the vehicle license plate in the dark.
6
1
Share

How to Remove the Rear Brake Disc of a Tiida?

The specific steps for removing the brake disc are as follows: 1. Begin by removing the brake caliper. 2. Proceed to remove the rear wheel assembly. Note that a special tool is required when removing the rear wheel bearing cover. 3. Start removing the rear brake disc shield. 4. After removing the rear wheel bearing, it should look like this. At this point, it's advisable to clean any dust inside the bearing sleeve. 5. Install the new brake disc shield, tighten the rear wheel bearing, and reattach the bearing cover. 6. Reinstall the brake caliper bracket. 7. After installing the brake pads, reattach the brake caliper, secure the screws between the caliper and the bracket, and tighten them. 8. After tightening all bolts, reinstall the wheel hub.
12
0
Share

Where is the child lock on the Elysee?

Here is the location of the Elysee child lock: 1. The Elysee door child lock is located below the lock on the rear door, which is on the side of the door. Both doors have it, and switching it on or off is done by moving it up or down. 2. There are two common types of child safety lock switches: one is a rotary knob type, and the other is a toggle type. 3. The car child safety lock is a feature designed to prevent children from accidentally opening the car door and causing harm. When the child lock function is activated, the rear door cannot be opened from the inside but can still be opened from the outside. When the child lock function is deactivated, the door can be opened from both inside and outside.
14
5
Share

Why does the Audi A4L start-stop system fail?

Audi automatic start-stop failure reasons are as follows: 1. When the battery power is below 60%, the automatic start-stop function does not work. 2. In winter, when the outside temperature is below 5℃, or the inside temperature is below 20℃. 3. The engine has not reached the standard operating temperature. 4. The steering wheel angle deviates from the central axis by more than 30 degrees. Tips for using automatic start-stop are as follows: 1. The automatic start-stop function can only be permanently disabled by coding, and usually needs to be manually turned off by the driver each time. 2. During severely congested holidays, turning off this function makes for a smoother experience. Slower starts might lead to being cut off in traffic. 3. Additionally, when starting on a slope, this function should also be turned off to prevent slow response and vehicle rollback.
9
4
Share

How to Use the S Gear in Binyue?

The method for using the S gear in Binyue is as follows: 1. The S gear button is located on the rear panel of the gear lever. Simply press it to switch to S gear. 2. Due to its strong power, the S gear is mostly used when overtaking or climbing slopes. After completing the action, switch back to the more economical D gear. More related information is as follows: 1. The Binyue is a high-performance intelligent SUV from Geely, equipped with an autonomous driving system, AEB city pre-collision safety system, LDW lane departure warning system, BSD blind spot monitoring function, and PPS pedestrian recognition and protection system. 2. The Binyue uses two types of engines: a 1.4-liter turbocharged engine and a 1.5-liter turbocharged engine.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.