How many amps is the Haval cigarette lighter?

2 Answers
StBrantley
07/29/25 10:52am
Haval cigarette lighters are generally 12V, and the connection to the fuse box is usually 15-20A. Cigarette lighter load: The general maximum power capacity of a cigarette lighter is 120W. Exceeding this value can easily cause the cigarette lighter to overload, leading to various hazards such as burning out the lighter. Using the cigarette lighter for extended periods: If you need to use the cigarette lighter for a long time or with high-power devices, it is necessary to start the car engine to enhance the power supply. This prevents draining the car battery. The cigarette lighter in the car draws DC power from the car's alternator. As long as the car's engine is running, it drives the alternator to generate electricity, which is the source of power for all in-car electrical usage.
Was this review help?
11
2
Share
JoannaFitz
08/13/25 4:21pm
The cigarette lighter in Haval vehicles is typically rated at 10 amps, which is adequately designed for everyday use like charging phones or powering car navigation systems, as well as lighting cigarettes. However, it's important not to exceed this limit to avoid blowing fuses or damaging the circuit. I frequently use this socket in my car for charging—it's quite convenient, located right next to the driver's seat within easy reach. But be cautious: avoid plugging in high-power devices like inverters or heaters. Once, I accidentally plugged in a car vacuum cleaner, and the excessive current caused the fuse to blow, leaving me stranded on the roadside until I could get it fixed. It's advisable to regularly check and clean the socket interface to prevent dust buildup from affecting connectivity. In summary, safe usage is key—always read the manual to understand specific parameters and avoid risks. Take good care of this handy tool while driving.
Was this review help?
11
3
Share
Expand All
More Forum Discussions

How to Calibrate the Senova X35 SAS?

Select the X35 model, click "Start Diagnosis", and load the program. Double-click "Electric Power Steering (EPS)" to enter the diagnostic interface. Select "ECU Configuration" and click "Steering Angle Sensor Calibration". Click "Calibrate" to complete the calibration.
9
3
Share

How to remove the small wrench icon on the 2014 B50 dashboard?

Insert the key, but only insert it without turning. Hold the lever next to the odometer for 5-10 seconds, then turn the key to power on. After another 5-10 seconds, start the car. Keep holding the lever throughout this process without releasing it. Generally, following these steps will clear the small wrench icon. If it doesn't clear, repeat the same process a few more times.
9
0
Share

What Causes High Transmission Temperature?

Reasons for high transmission temperature: 1. Clogged pump suction filter screen; 2. Poor radiator cooling capacity; 3. Severe machine overload operation; 4. Serious wear or damage to the transmission hydraulic pump; 5. Severe system leakage, improper operation of the torque converter inlet regulating proportional valve; 6. Transmission clutch slippage can also lead to excessively high transmission temperature. The transmission is a mechanism used to change the speed and torque from the engine, capable of fixing or changing the gear ratio between the output and input shafts, also known as a gearbox. The transmission consists of a gear transmission mechanism and a control mechanism, with some vehicles also equipped with a power take-off mechanism.
16
2
Share

Can the car still be driven if the transmission is slipping?

If the transmission is slipping, the car should not be driven as it poses a safety hazard and requires immediate repair. Causes of transmission slipping: 1. Wear and tear of the clutch, brake, or one-way clutch leading to slipping; 2. Addition or replacement with non-specified oil; 3. Slipping caused by low main oil pressure. The transmission mainly refers to the car's gearbox, which is divided into manual and automatic types. Manual transmissions primarily consist of gears and shafts, achieving speed and torque variation through different gear combinations; automatic transmissions are composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system, achieving speed and torque variation through hydraulic transmission and gear combinations.
11
2
Share

What is the valve clearance for the Ford Focus?

Ford Focus valve clearance is 0.22 to 0.28MM for intake and 0.27 to 0.330MM for exhaust when the engine is cold. Valve clearance is set to ensure the proper operation of the internal combustion engine's valve train. Since the valve train operates at high speeds and elevated temperatures, components like the valve tappet and valve stem expand when heated. Without proper clearance, this expansion could automatically push the valve open, preventing it from sealing tightly against the valve seat, leading to air leakage. The Focus is an A-segment family car and one of Ford Europe's flagship models. It is equipped with either a 1.5L EcoBoost or a 1.5L Ti-VCT engine, and all models meet the China VI emission standards.
16
2
Share

How Should Beginners Drive on the Highway?

Beginners on the highway should maintain a safe distance from the vehicle in front. Here are some tips for beginners driving on the highway: 1. High-speed driving: Avoid sudden steering wheel movements while driving on the highway. Do not reverse, drive against traffic, or make U-turns or turns across the central divider. During normal driving, the following vehicle in the same lane must maintain a sufficient distance from the vehicle in front. 2. Precautions: When entering the highway, accelerate to a speed of at least 50 km/h as quickly as possible. Vehicles entering the highway from the ramp must increase their speed in the acceleration lane. When merging into the main lane, they must not hinder vehicles already traveling in the main lane and should drive in the outer lane.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.