How Long is the Physical Examination Valid for License Renewal?

2 Answers
FinleyRose
09/08/25 4:08am
The physical examination for driver's license renewal is valid within three months. The full name of the driver's license is the motor vehicle driver's license, also known as a driving license or driver's permit. It is a legally required document for individuals who operate motor vehicles. License renewal and inspection must meet the following conditions: Holders of large passenger vehicle, tractor, city bus, medium-sized passenger vehicle, or large truck licenses must have no demerit points in the current scoring cycle, or holders of other vehicle-type licenses must have fewer than 12 demerit points in the current scoring cycle; Holders of large passenger vehicle, tractor, city bus, medium-sized passenger vehicle, or large truck licenses who have demerit points in a scoring cycle, as well as holders of other vehicle-type licenses involved in a fatal traffic accident where they bear equal or greater responsibility but have not had their license revoked, must have completed the required inspection education; The applicant must have no pending road traffic safety violations or traffic accidents; The applicant's physical condition must meet the driving permit requirements; The motor vehicle driver's license must not be under any legal seizure, detention, suspension, revocation, cancellation, or annulment.
Was this review help?
10
2
Share
AlanLynn
09/20/25 2:52am
A few days ago, I went to renew my driver's license. The medical examination report must be valid within 90 days, meaning you have to submit it to the license renewal center within three months from the day of the exam. If it expires, you'll have to redo it, which is time-consuming and costly—I almost missed the deadline once. The check-up mainly covers basic items like vision and hearing to ensure everyone's recent health condition is suitable for driving. It's advisable to book an appointment early at a hospital or designated institution, bring your ID card, and make sure the report has an official stamp. Delaying not only holds up the renewal process but could also get you stuck if health issues arise, requiring you to address medical problems first. Safe driving is the top priority, so don't procrastinate on this.
Was this review help?
18
1
Share
Expand All
More Forum Discussions

What are the models of Earth Dreams engines?

Earth Dreams engine models include: 1.5L, 2.0L, 2.4L, 3.0L, 3.5L. The car engine is the device that provides power for the vehicle, determining its power performance, fuel economy, stability, and environmental friendliness. The engine consists of: 1. Crank linkage mechanism and valve train; 2. Fuel supply system; 3. Cooling system; 4. Lubrication system; 5. Ignition system and starting system. Engine types are divided into: diesel engines, gasoline engines, electric vehicle motors, and hybrid motors. Engine maintenance methods include: 1. Regularly changing engine oil and oil filter; 2. Periodically cleaning the fuel system, car radiator, and crankcase.
17
2
Share

How many colors are available for the Honda XR-V?

The Honda XR-V is available in 4 colors: Pearl White, Crystal Black, Taffeta White, and Snowflake Silver. Taking the 2021 Honda XR-V as an example, its body dimensions are: length 4328mm, width 1772mm, height 1610mm, with a wheelbase of 2610mm and a minimum ground clearance of 130mm. The 2021 Honda XR-V is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 96kW and a maximum torque of 155Nm, paired with a 6-speed manual transmission. It features a front McPherson independent suspension and a rear torsion beam suspension.
6
3
Share

Where is the Auto Start-Stop Button on the Elysion?

The auto start-stop button on the Elysion is located in the mechanical button area on the left side of the center console. The auto start-stop function automatically turns off the engine when the vehicle comes to a temporary stop during driving. The Elysion has the following dimensions: length 4950mm, width 1842mm, height 1711mm, wheelbase 2900mm, front track 1559mm, rear track 1560mm, and a fuel tank capacity of 50 liters. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 107kW and a maximum torque of 175Nm. The front suspension is a MacPherson strut independent suspension, and the rear suspension is a torsion beam non-independent suspension.
7
0
Share

Is the Trumpchi GS4 a domestic or joint-venture car?

The Trumpchi GS4 is a domestic car. Its body dimensions are: length 4545mm, width 1856mm, height 1668mm, with a wheelbase of 2680mm. It has a fuel tank capacity of 55 liters and a trunk capacity ranging from 470 to 1560 liters. The tire specification is 225/60R17. The Trumpchi GS4 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 124kW at 5000rpm and a maximum torque of 265Nm between 1700 to 4000rpm. It is paired with a 6-speed manual transmission. The front suspension uses a MacPherson independent suspension system, while the rear suspension features a multi-link independent suspension system.
3
5
Share

What to Do When the Car Hood Won't Open?

Most hood release levers are located under the dashboard on the driver's side. Simply pull it gently to hear a click, then locate the protruding latch near the hood to open it. If it still won't open, try using a sturdy tool to pry it open. If unsuccessful, it's recommended to take the car to a 4S shop for repair. Functions of the hood: 1. Airflow guidance: For objects moving at high speeds in the air, the aerodynamic drag and turbulence generated around the object directly affect its trajectory and speed. The hood's shape helps adjust the airflow direction relative to the car's movement and reduces resistance, minimizing the impact of airflow on the vehicle. Proper airflow can decompose resistance into beneficial forces, enhancing front-wheel traction and improving driving stability. 2. Protection of vehicle components: The hood safeguards the engine and surrounding pipelines and accessories. Beneath the hood lie critical components such as the engine, electrical circuits, fuel system, braking system, and transmission. Strengthening the hood's structure can effectively protect these parts from impacts, corrosion, rain, and electrical interference, ensuring normal vehicle operation. 3. Reduction of glare for the driver: During driving, the reflection of natural light and the driver's forward visibility are crucial for accurately assessing road conditions. The hood's design helps adjust the direction and form of reflected light, reducing glare and improving driver visibility. 4. Shield function: The engine operates in a high-temperature, high-pressure, and flammable environment, posing risks of explosions, fires, or leaks due to overheating or component failure. The hood acts as a protective shield, mitigating potential damage from such incidents.
19
2
Share

What is the purpose of adding engine oil to a car?

Adding engine oil to a car ensures the normal operation of the engine. Engine oil, also known as engine lubricant, is composed of base oil and additives. Its functions include: 1. Lubrication; 2. Assisting in cooling and temperature reduction; 3. Cleaning; 4. Sealing and preventing leaks; 5. Rust and corrosion prevention; 6. Shock absorption and cushioning, as well as anti-wear. Engine oil is classified by viscosity into: 1. Four-stroke engine oil; 2. Two-stroke engine oil. Engine oil can also be selected based on usage conditions: 1. Diesel engine oil: Chosen according to the combined mechanical and thermal loads of the car engine and the severity of the engine's operating conditions; 2. Gasoline engine oil: Selected based on the severity of the engine's operating conditions, additional devices in the car's intake and exhaust systems, and the production year.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.