How Long Does the Subject 4 Driving Test Take?

2 Answers
KinsleyLee
07/29/25 1:32am
The test duration is 45 minutes, and the exam will be terminated if you make mistakes totaling 12 points (6 questions) during the test. Below are the precautions for the Subject 4 test: 1. Verify Information: After sitting down, first verify the examinee information. If it does not match your details, check whether it is your assigned seat. If not, locate your correct seat. If the seat is correct but the information is wrong, report it immediately. 2. Follow Exam Room Rules: During the Subject 4 test, adhere to the exam room discipline. If you make loud noises while waiting, you will be directly expelled and disqualified from the test that day. 3. Follow Instructions: Obey the staff's arrangements. If you have any questions, raise your hand and ask the examiner. Don't be afraid. 4. Adjust Camera Position: Adjust the camera to focus on the upper one-third of your face and chest. If your face does not appear within the monitoring range, your score will be invalidated.
Was this review help?
12
2
Share
DeIvan
08/12/25 5:38am
The duration of the Subject 4 exam is usually 45 minutes, as officially stipulated, since there are 50 questions. As someone who frequently coaches students, I recommend practicing with question banks extensively during preparation and simulating real exam timing. Many examinees can finish in 30 minutes, but don't rush to submit—take time to review; the system will automatically submit when time runs out for unanswered questions. The exam environment also matters—quieter settings with faster computer responses help; occasional delays of a few seconds due to lag can be managed. The key is to stay calm—there's enough time, so don't panic. Maintain a steady answering rhythm during practice. Those unfamiliar with the rules might be slightly slower. The 45-minute design is reasonable, averaging under a minute per question for thoughtful responses—just avoid dwelling too long on any single question.
Was this review help?
14
5
Share
Expand All
More Forum Discussions

Can water replace windshield washer fluid in summer?

Windshield washer fluid cannot be replaced with water in summer because it is mainly composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. If water is used as a substitute for windshield washer fluid, it can only clean dust simply and lacks the ability to thoroughly remove dirt and insect residues attached to the windshield. Additionally, ordinary tap water contains many impurities, which can accumulate in the rubber hoses over time, leading to clogging of the nozzles and pipes. Long-term use may increase friction between the glass surface and the wiper blades, causing scratches on the glass and shortening the lifespan of the wiper blades. The main functions of windshield washer fluid include: 1. Cleaning performance; 2. Anti-freezing performance; 3. Anti-fog performance; 4. Anti-static performance; 5. Lubricating performance; 6. Anti-corrosion performance.
10
5
Share

What are the reasons for the blower not working in the Magotan?

There are several reasons why the blower in the Volkswagen Magotan may not be working, including prolonged use of the blower and insufficient power supply. Here are the specific details: Prolonged use of the blower: If the blower has been used for a long time, excessive dust accumulation can increase the friction coefficient between the rotor and bearings, causing the rotor to become obstructed or even stuck, leading to overheating and damage of the coil. Insufficient power supply: This could be due to the absence of 220V AC input or a damaged coil. To check, connect the power supply and carefully measure both ends of the power cord with a test pen. If one end lights up and the other does not, it indicates that the power input is normal, and the issue lies with a damaged blower coil. If both ends light up or neither lights up, it suggests a problem with the power input.
11
1
Share

How to Eliminate the Brake Warning?

To eliminate the brake warning, first release the handbrake. If the light turns off, the issue is with the handbrake. If the light remains on, the problem lies with the brakes. Check if the brake system is low on brake fluid or if the parking light switch is malfunctioning. The brake warning light is red and features an exclamation mark inside a circle. If the red brake warning light illuminates, it indicates a fault in the brake system. The automotive brake system refers to a series of specialized devices that apply a certain force to specific parts of the vehicle (primarily the wheels) to enforce a certain degree of braking. The functions of the brake system are: to forcibly decelerate or even stop a moving vehicle as required by the driver, to keep a stationary vehicle stable under various road conditions (including on slopes), and to maintain a stable speed for a vehicle moving downhill.
16
3
Share

Why did the Magotan suddenly fail to connect to Bluetooth?

If the Magotan suddenly fails to connect to Bluetooth, it may be caused by the following reasons: 1. Out of range: The current mobile device has moved out of the communication range of the car's Bluetooth, and the distance is too far to receive the signal; Solution: Move closer to the car's Bluetooth and reconnect. 2. System incompatibility: The current mobile phone system and the car's Bluetooth system are incompatible, causing frequent signal interruptions; Solution: Upgrade the mobile phone system to the latest version and try to connect again. 3. Device instability: Due to the instability factors of electronic devices; Solution: It is recommended to restart the mobile phone and reconnect. 4. Connection to other devices: The mobile phone Bluetooth has connection records with other devices; Solution: It is recommended to delete the previously connected Bluetooth devices. 5. Hardware failure: Hardware facility failure, whether it is a problem with the car's Bluetooth module or the mobile phone's Bluetooth function, cannot be successfully connected; Solution: Repair or replace the Bluetooth module.
11
1
Share

Can the rear seats of the Audi A6L access the trunk?

The rear seats of the Audi A6L cannot access the trunk. Below are the specifications of the Audi A6L 2.0T: 1. Body dimensions: The length/width/height of the Audi A6L 2.0T Zhì Yǎ (Elegance) model are 5038/1886/1475mm, while the Dòng Gǎn (Sport) model measures 5050/1886/1475mm, both with a wheelbase of 3024mm. 2. Powertrain: Equipped with high/low-power 2.0T engines (with 12V mild hybrid system), the former offers two power-tuned versions. The 40TFSI model delivers a maximum power of 140kW (190PS) and peak torque of 320N·m, while the 45TFSI model produces a maximum power of 165kW (224PS) and peak torque of 370N·m.
10
0
Share

Why is there a strange noise when braking on rainy days?

Car brake noise on rainy days, specific situations are as follows: 1, Fine sand: It may be caused by fine sand brought up by water adhering to the brake disc, or rust on the brake disc after rain. 2, Malfunction: It could also be due to a malfunction in the brake system. Missing or damaged fixing screws of the brake disc can also cause brake noise. If the brake system is malfunctioning, it is necessary to go to a 4S shop or repair shop for inspection and repair. Additional information: Fine sand brought up by water adhering to the brake disc, humid weather or large temperature differences between day and night causing dew or rust on the brake disc after rain, which is equivalent to small particles. Car brake pads are divided into hard and soft types. Hard ones are more wear-resistant, but if there are small particles between the hard brake pads and the gray cast iron brake disc, there will be a sharp noise. The noise will stop once the small particles are worn away by braking.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.