How long does it take to pick up a car after purchase?

1 Answers
MacMarcus
07/23/25 11:13pm
The time it takes to pick up a car after purchase depends on the vehicle inventory at the 4S store: 1. For models that have been on the market for a while, there is usually no need to wait as they are in stock. If the car is available, you can usually drive it away the same day or the next day. 2. For popular models or newly launched ones, additional costs or upgrades are often required, and you may have to wait several months to get the car. 3. If the 4S store does not have the car in stock but the manufacturer does, including the transportation process, it usually takes about 11 to 12 days to pick up the car. Things to note when picking up the car: 1. First, inspect the exterior, focusing on the paintwork. 2. Check the engine compartment. 3. Ensure all in-car equipment is functioning properly.
Was this review help?
8
5
Share
More Forum Discussions

How to adjust the headlights of the Verano?

The method to adjust the headlights of the Verano: Open the engine hood of the Verano, and you will find two white hexagonal adjustment plastic knobs at the rear of the headlights. The knob near the rear headlight mounting bracket is for height adjustment. Use a hexagonal adjustment rod or screwdriver to rotate the knob—clockwise to raise the headlight height and counterclockwise to lower it. How to use the Verano's lights: For the headlights, turn the knob up two notches. To switch between high and low beams, pull the lever toward the driver and then release it. For the turn signals, pull and release the lever twice quickly. The fog lights are activated by turning the knob up two notches. The hazard warning lights are activated by pressing the red button lightly—do not hold it down. The dimensions of the Verano are 4718mm in length, 1802mm in width, and 1471mm in height, with a wheelbase of 2700mm.
14
1
Share

Is the Lamando a B-segment car?

Lamando is not a B-segment car, but an A-segment car. A-segment cars, also known as compact cars, typically have a body length ranging from 4.3 meters to 4.79 meters, a wheelbase between 2.35 meters and 2.79 meters, and an engine displacement generally between 1.4 liters and 2.0 liters. The Lamando measures 4598mm in length, 1826mm in width, and 1425mm in height, with a wheelbase of 2656mm, which falls within the A-segment range. The Lamando is a model under the Volkswagen brand, and SAIC Volkswagen defines it as the first wide-body coupe. The Lamando is equipped with two engines: a low-power version of the 1.4-liter turbocharged engine and a high-power version of the 1.4-liter turbocharged engine, paired with a wet 7-speed dual-clutch transmission.
20
3
Share

Is there speed detection with cameras in a 30 km/h speed limit zone?

Speed detection is generally not conducted in areas with a 30 km/h speed limit. Relevant regulations: According to relevant regulations, mobile speed detection monitoring equipment is generally not allowed to be set up on road sections with speed limits below 50 km/h. On normal speed detection sections, warning signs indicating radar speed detection or monitoring equipment supervision (speed detection) should be installed. Penalties for speeding in highway interval speed detection: Speeding less than 10%: a warning will be issued without penalty points or fines; speeding between 10% and 20%: 3 penalty points and a fine; speeding between 20% and 50%: 6 penalty points and a fine; speeding over 50%: 12 penalty points, a fine, temporary suspension of driver's license, and mandatory training.
17
5
Share

How to Turn Off the Interior Light in a Volkswagen?

Methods to turn off the interior light in a Volkswagen: 1. There is a switch above the front row inside the car with several switch modes; 2. Locate the switch and you can directly turn it off; 3. Alternatively, you can adjust the switch to the door symbol position, where the light only turns on when the door is opened and remains off at other times. Volkswagen is an automobile manufacturing company headquartered in Wolfsburg, Germany, with models including the Touareg, Eos, Scirocco, Scirocco R, Cross Golf, Golf Variant, Golf R, Passat Variant, Passat Alltrack, CC, and Sharan. The Volkswagen logo resembles three 'V's made with the middle and index fingers, symbolizing the company's and its products' victory.
16
0
Share

Will shifting gears while parking in reverse result in penalty points?

Whether shifting gears while parking in reverse results in penalty points mainly depends on whether the gear shifting occurs during the reversing process or after the parking is completed. If the gear shifting happens during the reversing process, it is considered an intermediate stop and will incur penalty points. If the gear shifting occurs after the parking is completed, no penalty points will be deducted. Reverse Parking: This assesses the driver's ability to maneuver the vehicle in a designated area. Reverse parking is a key evaluation point in the driver's test, which involves correctly reversing the vehicle into a garage from both sides while in motion. Test Content for Reverse Parking: Reverse from the starting point A into garage B and park correctly; move forward to the turnaround area C and stop; reverse from the turnaround area into garage B and stop; return from garage B to A to complete the test.
2
4
Share

Is Exceeding the Line During Reverse Parking a Deduction or Failure?

Exceeding the line with the vehicle body results in a 100-point deduction, leading directly to failure. Other actions that also incur a 100-point deduction include crossing the line, not fully entering the parking space, stopping midway, not following the prescribed route or sequence, and exceeding the allotted time. The full score for Subject 2 is 100 points, with evaluation criteria set for failure, 20-point deductions, 10-point deductions, and 5-point deductions. The rules for the Subject 2 driving test state that any mid-test stopping, rolling back, or not following voice instructions results in failure. Additionally, having wheels or the vehicle body cross the line also leads to failure. Many learners encounter line-crossing issues during Subject 2 training, with "crossing the line" being the most common reason for failure. The primary cause of wheel line-crossing is learners not mastering the correct timing for steering. Besides missing the right moment to steer, another reason could be the steering speed not matching the vehicle's speed. Subject 2 Deduction Standards: Not wearing a seatbelt: 100-point deduction. Starting the engine without the gear in neutral: 100-point deduction. Not using turn signals (including when starting, changing lanes, overtaking, turning, or parking); using turn signals for less than three seconds (note this is easily overlooked!); forgetting to turn off the turn signal or using it incorrectly: 10-point deduction. Stalling once: 10-point deduction. Reverse Parking: Not following the prescribed route sequence: 100-point deduction. Vehicle body exceeding the line: 100-point deduction. Not fully entering the parking space: 100-point deduction. Before reversing, not having both front wheels pass the control line: 100-point deduction. Exceeding the 210-second time limit: 100-point deduction. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. Slope Parking and Starting: After stopping, the front bumper not aligning with the pole line and exceeding 50 cm front or back: 100-point deduction. After stopping, the front bumper not aligning with the pole line but not exceeding 50 cm front or back: 10-point deduction. After stopping, taking more than 30 seconds to start: 100-point deduction. Wheels touching the road edge line while driving: 100-point deduction. Rolling back more than 30 cm when starting: 100-point deduction. After stopping, the vehicle body being more than 50 cm from the road edge line: 100-point deduction. Not tightening the parking brake after stopping: 10-point deduction per occurrence. After stopping, the vehicle body being more than 30 cm but not exceeding 50 cm from the road edge line: 10-point deduction per occurrence. Rolling back more than 10 cm but less than 30 cm when starting: 5-point deduction per occurrence. Parallel Parking: After parking, the vehicle body exceeding the line: 100-point deduction. Not using or incorrectly using turn signals when entering the space: 10-point deduction. Exceeding the 90-second time limit: 100-point deduction. Touching the parking space edge line with the vehicle body while driving: 10-point deduction per occurrence. Wheels touching the lane edge line while driving: 10-point deduction per occurrence. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. 90-Degree Turn: Wheels touching the road edge line: 100-point deduction. Not using or incorrectly using turn signals during the turn, or not turning them off after the turn: 10-point deduction. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. Curve Driving: Wheels touching the road edge line: 100-point deduction. Stopping for more than 2 seconds midway: 100-point deduction. Not being in second gear or higher while driving: 5-point deduction.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.