···
Log in / Register

How long does it generally take for a 4S shop to repair car paint scratches?

4 Answers
MacRowan
07/30/25 1:06am

4S shops usually require queuing for paint repairs, even minor scratches may take several days. Below is relevant information about car paint: 1. Introduction: Car paint is a protective film sprayed onto vehicles, serving as a coating that makes the car body less susceptible to corrosion while also providing an aesthetic appeal. Different car paints produce different effects. 2. Advantages: The main characteristics of car paint performance include excellent film fullness, high gloss, strong hardness, good adhesion, and superior mechanical properties of the paint film. It features outstanding gloss retention, weather resistance, abrasion resistance, as well as good resistance to acids, alkalis, alcohol, and gasoline.

Was this review help?
16
3
Share
LeSophie
08/15/25 6:37am

I've been driving for over a decade and encountered many paint scratches. The repair time at 4S shops mainly depends on the scratch depth. For superficial scratches like surface abrasions, they can polish it out in about half an hour—just drop off your car and wait briefly. However, if the primer is exposed with deeper damage, repainting is required: first sanding off the old paint, then spraying new paint and baking it dry. The entire process takes at least 24 hours, potentially extending to 2-3 days in humid weather as drying slows down. Since 4S shops prioritize OEM-quality results, they ensure paint fully cures to prevent discoloration, unlike quick but less durable roadside stalls. Also factor in appointment queues—summer/rainy seasons see longer waits due to higher demand. It's advisable to visit on weekdays during off-peak hours for an accurate timeframe from technicians; minor scratches often allow same-day pickup. Remember, avoid DIY touch-ups—saving minor time may cost major time in rework later.

Was this review help?
4
0
Share
Expand All
DelilahDella
10/20/25 5:09am

I commute to work by car every day, and when my car gets scratched, I send it to the 4S shop for repairs. The time it takes really varies. Minor scratches can be fixed in half an hour, but if it requires repainting, it usually takes a day or two to get the car back because they have multiple steps: cleaning, painting, drying, and polishing—none can be skipped. I find that dropping it off on weekdays is faster than on weekends, especially in the morning when there's less queueing, allowing for same-day pickup for minor repairs. But don’t rush the process—poor results from hurried work would be worse. Actually, some professional quick-repair shops are faster, but 4S shops match paint colors more accurately and have steadier techniques, making the longer wait worthwhile. After repairs, remember to check if the color matches to avoid wasting extra time on a return trip.

Was this review help?
5
4
Share
Expand All
Martinez
12/03/25 5:42am

Repairing car paint scratches at a 4S shop is quite flexible in terms of time, depending on the severity of the issue. Minor scratches can be fixed in the blink of an eye—the technician just buffs them out. For deeper scratches that penetrate the paint layer, a repainting process is required, which takes at least a day because the drying process can't be rushed, or the paint may peel. I once took my car in for medium-depth scratches, and it took a whole day to complete. Although 4S shops charge more, the meticulous repair work is worth the time, ensuring long-lasting results and saving money in the long run.

Was this review help?
7
3
Share
Expand All
More Forum Discussions

Why Did the Car Suddenly Stall?

Here are the reasons why a car may suddenly stall: Electrical Circuit Fault: This could be due to a low-voltage power failure while driving, causing the car to stall. In this case, you should primarily check the ignition and starter switches, as well as the fuse box. Electrical Component Failure: This issue is usually related to the ignition coil, capacitor, or electronic ignition module. The car may start initially, but then stall after a while, only to start again and stall once more. Fuel System Fault: Possible causes include a damaged fuel pump, a ruptured fuel line, a clogged carburetor fuel inlet, or an empty fuel tank. In such cases, the car may still be able to restart, but with great difficulty.
14
3
Share

Does the B2 license require annual review?

B2 driver's license requires an annual review. Here are the precautions during the vehicle inspection Keep the vehicle clean and tidy. To leave a good first impression on the inspectors, it is recommended to clean the vehicle as much as possible before the inspection, giving it a brand-new appearance. Minor scratches on the vehicle will also be less noticeable, making it easier for the inspectors to pass. Ensure all traffic violations are settled. If there are unresolved violations on your vehicle, the staff will not proceed with the annual inspection, causing significant delays. Make sure to settle all violations before the inspection. Prepare the necessary items to bring. Before the inspection, you need to prepare the vehicle registration certificate, compulsory traffic insurance policy, driver's ID card, as well as essential items such as a fire extinguisher, warning triangle, reflective vest, and other emergency supplies. If these are not prepared, you will need to purchase them at designated locations.
9
0
Share

In which year was the EA888 third generation used in the Q3?

The third-generation EA888 has been in use since 2011. The 2011 Q3 model features the third-generation EA888. Relevant details are as follows: 1. The EA888 engine delivers more powerful performance compared to its peers, with the 2.0T inline-four engine capable of reaching a maximum horsepower of 220 HP and a maximum torque of 350 Nm. As of 2021, domestically produced models like the Passat and Magotan, as well as imported models such as the Multivan, still utilize the EA888 engine, paired with Volkswagen's seven-speed dual-clutch transmission, offering excellent dynamic performance. 2. The EA888 1.8T version can generate 170 HP with a maximum torque of 320 Nm, while the 2.0T version achieves a maximum horsepower of 220 HP and a maximum torque of 350 Nm.
16
2
Share

Dump Truck Heavy Load Downhill Methods?

You can use exhaust disc brakes for braking, or adopt exhaust braking for downhill descent. Dump trucks have large volumes and weights, making deceleration and braking relatively difficult to operate. Exhaust disc brake braking is a relatively common braking method, basically a standard product for light, medium, and heavy trucks. This braking method can achieve the purpose of reducing speed in a short time. Here is extended information: Engine: When exhaust braking is working, the exhaust valve is opened with a small gap, allowing the engine to release compression energy through exhaust during the compression stroke, thereby achieving the purpose of deceleration for the vehicle. According to the implementation method, it can be divided into two types: active and passive. Due to the large weight of dump trucks, prolonged braking can cause the brake temperature to be too high and fail. It is recommended to install a water spray device on the truck. During the driving process, the car can cool the brakes. Before driving on the road, be sure to check the brake clearance to avoid excessive clearance that requires hard braking to stop.
12
2
Share

What is the Difference Between Ceramic Brake Pads and Metallic Brake Pads?

Ceramic brake pads and metallic brake pads differ in the following aspects: Metal Content: Ceramic brake pads do not contain metal components, while metallic brake pads are mostly composed of semi-metallic or low-metallic materials. Heat Dissipation: Ceramic brake pads have better heat dissipation compared to metallic brake pads. High-Temperature Resistance: Ceramic brake pads can withstand continuous high-temperature braking, resulting in shorter braking distances, whereas metallic brake pads perform slightly worse in high-temperature resistance. Wear: Ceramic brake pads experience less wear and have better durability. Metallic brake pads are prone to rust, and their hardness can cause noise when the pads are damaged. Performance: Overall, ceramic brake pads outperform metallic brake pads in terms of performance. However, ceramic brake pads are relatively more expensive, while metallic brake pads are more widely applicable for most vehicles.
2
1
Share

How Often Should a Vehicle Undergo Wheel Alignment

The following is an introduction to the recommended intervals for wheel alignment: 1. Wheel alignment should be performed every 10,000 kilometers or once a year. 2. If the vehicle is used frequently or often driven on mountainous roads, the interval should be shortened to every 6 to 8 months or 6,000 to 8,000 kilometers. The following situations indicate the need for wheel alignment: 1. The vehicle's driving performance is affected (the most noticeable symptom for the driver is pulling to one side or the steering wheel not returning to center automatically). 2. Damage to the chassis or suspension caused by an accident. 3. Abnormal tire wear. It is also necessary to consider whether abnormal wear is caused by incorrect tire pressure. Generally, overinflation accelerates wear in the center of the tread, while underinflation accelerates wear on both sides of the tread. If one side shows uneven wear, it may indicate a deviation in the camber angle. 4. The axle or suspension components have been removed.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.