How Long Can You Drive After Mercedes-Benz Warns of Brake Pad Wear?

2 Answers
DeAngelina
07/29/25 2:41am
Mercedes-Benz warns that you can drive approximately 50 kilometers after the brake pad wear alert appears. The alert indicates that the brake pads have worn down to the limit mark, meaning they are nearly worn out, and it is recommended to replace them as soon as possible. There is no fixed mileage for how much further you can drive, as each driver's habits and road conditions vary. Generally, brake pads should be replaced when their thickness is less than 3mm. Continuing to use them beyond this point may cause the metal backing of the pads to wear down the brake discs, reducing braking efficiency and necessitating the replacement of both the pads and discs. Taking the Mercedes-Benz E-Class as an example, its body dimensions are 5078mm in length, 1860mm in width, and 1484mm in height, with a wheelbase of 3079mm. Both the front and rear suspensions of this vehicle feature multi-link independent suspensions.
Was this review help?
15
1
Share
TessaLynn
08/12/25 6:36am
I usually enjoy studying automotive technology. When the brake pad wear indicator comes on, it means the remaining thickness is almost gone, but you can still drive a few hundred kilometers, say around 500 to 800 km, depending on how you drive. High-speed driving or frequent hard braking on mountain roads will wear down the friction material faster. Plus, waiting too long might damage the brake discs, making repairs more expensive. It's advisable to check the brake fluid and wheels. Smooth driving can buy you a little more time, but don't delay—safety comes first. If something goes wrong in rainy weather or heavy traffic, the risk is too high. Scheduling a replacement as soon as possible is the best move.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

What is the difference between off-line parts and original parts?

The difference between off-line parts and original parts: 1. Different manufacturers: Off-line parts are accessories that come off the automobile assembly line; original parts are the accessories that come with the car itself. 2. Different manufacturer authorizations: Off-line parts are not authorized or certified by the automobile manufacturer; original parts are authorized and certified by the automobile manufacturer. Tips for identifying the quality of automobile parts: 1. Original parts usually have standardized packaging with clear and regular printing, while counterfeit products have rough and inferior packaging printing; 2. Some original parts are specified in a certain color, and parts in other colors are counterfeit; 3. Original parts are made of qualified materials according to design requirements, while counterfeit products mostly use cheap and inferior substitute materials; 4. Inferior products are prone to cracks, sand holes, slag inclusions, burrs, or bruises in appearance.
19
3
Share

How to Reset the Maintenance Light on a Zotye Car?

Zotye Car Maintenance Light Reset Method: Turn on the ignition switch, press and hold the reset button with one hand while turning off the ignition switch with the other hand. Wait until the clock and mileage on the dashboard completely disappear, then release the button. Press and hold the reset button again and turn the ignition switch back on. The Zotye car has a body length, width, and height of 5020mm, 1877mm, and 1469mm respectively, with a wheelbase of 3000mm. It is equipped with a Mitsubishi high-performance and mature technology engine, which delivers strong torque in both low and high-speed ranges while maintaining high stability, making it suitable for various road conditions. The emissions meet the National III standard.
15
1
Share

Is it necessary to service the car every 5,000 kilometers?

It is not mandatory to service the car every 5,000 kilometers. The frequency of car maintenance varies depending on the brand, model, and type of engine oil used. Generally, mineral oil should be replaced approximately every 5,000 kilometers or every six months; semi-synthetic oil should be replaced around every 7,500 kilometers or every nine months; and full-synthetic oil should be replaced every 10,000 kilometers or every year, whichever comes first. Car maintenance primarily includes servicing the engine system, transmission system, air conditioning system, etc., aiming to keep the car clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the vehicle's lifespan.
13
3
Share

Is Pressing the Clutch the Same as Shifting to Neutral?

Pressing the clutch and shifting to neutral have the same effect in terms of disconnecting the driving wheels from the transmission. In neutral gear, the transmission is still connected to the engine via the clutch, which remains engaged. When in neutral, the engine's power has already reached the transmission, but the neutral position means the power hasn't been transmitted to the drive axle, and it's used when the vehicle is stationary. Pressing the clutch stops the engine's power from reaching the transmission, which is used during starting and gear shifting. Pressing the clutch cuts off the power between the engine and the transmission, disconnecting the transmission from the engine, while the driving wheels rotate by inertia, causing all the gears in the transmission to rotate together.
3
5
Share

How to Reverse Park When There Are Cars on Both Sides?

First, maintain a horizontal distance of about 1.5 to 2 meters between your car and the parking space line, and adjust the vehicle accordingly. Depending on the size of the vehicle, stop the car one parking space ahead of the target spot, with the driver's position aligned to the middle of the parking space. Turn the steering wheel fully to the left and slowly reverse into the spot. Adjust slightly by observing the side mirrors or the reversing camera to maintain a safe distance from the cars on both sides. When the vehicle is parallel to the parking space, straighten the wheels and continue reversing until the car is fully parked.
20
2
Share

What is the emission standard of the Roewe i6?

The Roewe i6 complies with the China VI emission standard. The Roewe i6 is a model under the Roewe brand. In terms of body dimensions, it measures 4671mm in length, 1835mm in width, and 1464mm in height, with a wheelbase of 2715mm. The front suspension is of the MacPherson independent type, while the rear suspension is a multi-link independent setup. In terms of exterior design, the Roewe i6 adopts a wide and flat style, with the overall design consisting of smooth surfaces and sharp lines, giving the car a very sporty character. Additionally, the concept car features a ducktail-style rear design with a swallowtail cut-in style, where all lines converge at the taillights, resulting in high recognizability.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.