How is the point system calculated after merging a car driver's license with a motorcycle license?

How to Determine if a Vehicle Runs a Red Light?

It is determined by capturing three photos through electronic cameras. The principle of electronic eyes capturing red-light running is as follows: when the red light is on When your vehicle's front wheels cross the stop line on the ground, the electronic camera takes the first photo of your vehicle. When your vehicle's rear wheels cross the stop line on the ground, the electronic camera takes the second photo of your vehicle. When your vehicle passes through the intersection and crosses the stop line on the opposite side, the electronic camera takes the third photo of your vehicle. Finally, the system (or manually) selects the clearest photo to enlarge and obtain a close-up of the license plate, solidifying the evidence. The act of running a red light is clearly stipulated in the "Road Traffic Safety Law." Article 26 states that traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to pass, and a yellow light serves as a warning. A red light is a traffic signal prohibiting passage. If a vehicle passes through an intersection when the red light is on, it constitutes the traffic violation of running a red light. The following points can help avoid running a red light: First look at the arrow light, then the circular light: There are currently two types of indicator lights: arrow traffic lights and circular indicator traffic lights. In the presence of an arrow light, first observe the arrow light and then the circular light to avoid running a red light. Note: When encountering a circular red light, you can turn right; when encountering an arrow signal light where the right-turn arrow is red, you cannot turn right, otherwise, you will be penalized for running a red light. Brake in time: When the red light is on, do not let the front of your vehicle cross the stop line. If the front wheels accidentally cross and the rear wheels follow, the electronic camera will capture it, and you will be penalized for running a red light. If the front wheels have just crossed the stop line when the signal turns red, do not proceed through the intersection; wait for the green light before proceeding. Check the green light countdown before proceeding: When the green light is flashing, if there is a countdown, you can judge based on the remaining time; if there is no countdown and you are close to the intersection with high speed, you may proceed to avoid running a red light due to untimely braking. If your speed is low and you are far from the intersection, brake immediately to stop and avoid running a red light. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states the following regarding motor vehicle signal lights and non-motor vehicle signal lights: When the green light is on, vehicles are permitted to pass, but turning vehicles must not hinder the passage of straight-going vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to pass. When the red light is on, vehicles are prohibited from passing. At intersections without non-motor vehicle signal lights or pedestrian crossing signal lights, non-motor vehicles and pedestrians should follow the motor vehicle signal lights. When the red light is on, right-turning vehicles may pass if they do not hinder the passage of other vehicles or pedestrians. Running a red light is not considered illegal under the following circumstances: Yielding to special vehicles: Yielding to special vehicles such as ambulances or fire trucks. If you are captured by surveillance cameras while yielding to special vehicles, the act of running a red light will not be recorded during manual review. Even if recorded, you can apply for reconsideration at the traffic police department. Extreme weather: When visibility is very low, and even electronic police cannot clearly see the traffic lights. The photos capturing the violation may be blurry, and if you accidentally run a red light, the traffic police will not impose penalties. Emergency situations: When transporting a critically ill patient to the hospital, you will inevitably run many red lights, and 12 points will not be enough. After delivering the patient, the citizen can provide proof from the hospital or the rescued person to the traffic police for verification. If confirmed, the violation record can be cleared. If possible, it is best to call an ambulance to avoid accidents caused by running red lights. Traffic police command: During peak hours, traffic police may temporarily direct traffic at important intersections. Drivers should follow the gestures of the traffic police.

9

2

Share

What is the maximum wading depth of the BYD Tang?

According to official information, the maximum wading depth of the BYD Tang is 300mm. It commonly features tire specifications of 245/45R20, a body height of 1720mm, a curb weight of 1895kg, and is a 5-door, 7-seat SUV. The maximum wading depth refers to the deepest water a vehicle can safely pass through. Generally, the maximum wading depth for sedans does not exceed 300mm, while SUVs can handle slightly deeper water, though it's best not to exceed 500mm. Among common models, the GAC Trumpchi GS8 has a maximum wading depth of 700mm, the Audi A4 has 320mm, the Volkswagen Sagitar has 700mm, the Land Rover Range Rover has 900mm, the Jeep Compass has 800mm, and the Highlander has 455mm. SUVs generally have higher wading depths than sedans. Generally, when driving through water, vehicle owners should take different measures depending on the water depth and the vehicle's characteristics, as follows: When the wading depth reaches the height of the exhaust pipe, it is still safe. Even if water enters the exhaust pipe, the pressure inside can expel it. As long as the engine is not turned off in the water, water will not flow back into the vehicle. When the wading depth reaches the height of the door frame, it becomes more dangerous. The vehicle's circuits, electronic components, and sensors are mostly concentrated at the bottom, which could lead to short circuits, damaging critical electrical components and preventing the car from starting normally. When the wading depth reaches the height of the intake pipe, it is extremely dangerous. Driving directly into such conditions can cause the vehicle to stall immediately, resulting in permanent engine damage or rendering it unusable.

7

0

Share

How Does Insurance Cover Water Damage for New Cars?

Insurance claims for water-damaged vehicles include: vehicle towing fees; repair costs for body components damaged by water immersion; repair costs for engine water ingress. Important Notes: 1. Filing a Claim: Once the vehicle is submerged in water, the owner must immediately call the insurance company to report the incident. 2. Take Photos Promptly: In cases of large-scale vehicle flooding caused by heavy rain, insurance adjusters may not arrive quickly. Owners should photograph the submerged vehicle to document the damage for assessment purposes. 3. Towing Services: Both insurance companies and 4S shops provide towing services. However, during severe weather when towing services are overwhelmed and delayed, owners should be mentally prepared for potential wait times.

1

0

Share

How to Adjust Steering When the Right Side is Too Narrow During Right Reverse Parking

When the right side becomes too narrow during right reverse parking, it is usually due to steering the wheel too early or too late. Below are detailed techniques for reverse parking: 1. Identify the starting point: For right reverse parking, maintain a distance of 1.2-1.8 meters between the car and the left boundary line at the starting position. Ensure the steering wheels are straight and the car body is parallel to the left boundary line. When reversing, use the lower edge of the left rearview mirror as a reference. When the two align, turn the steering wheel fully to the right and continue reversing. 2. Control the corner point: Watch the right rearview mirror. When you spot the corner point of the parking space, observe the changing distance between the corner point and the car body until the car body becomes parallel with the parking line, then straighten the steering wheel by turning it back one and a half full circles. 3. Align the stopping point: The stopping point refers to where you stop after entering the parking space. The method for determining this is the same as identifying the starting point. When the lower edge of the left mirror aligns with the shoulder line of the parking space, stop the car.

9

1

Share

What is the identity of Audi cars with flashing lights?

Audi cars equipped with flashing lights are generally non-standard police vehicles in China. Non-standard police vehicles are also a type of police car, but they lack unified standards, patterns, and equipment, making their appearance opposite to that of standard police vehicles. Additional information is as follows: 1. Audi: A well-known brand in the automotive industry, a high-quality car developer and manufacturer, currently a subsidiary of Volkswagen. 2. The car emblem consists of four interlinked rings: Audi was founded in 1898, and its emblem features four interlinked rings, symbolizing the alliance of four car brands. These four brands are Audi, Horch, Wanderer, and DKW. Together, they founded Audi, making significant contributions to the development of the global automotive industry. As a world-class luxury car brand, Audi stands as a benchmark in the automotive industry with its high quality, advanced technology, and strong innovation capabilities.

8

2

Share

What does the teapot dripping warning light indicate?

This is the warning light indicating low engine oil pressure. Below is the relevant information: 1. Engine oil: Engine oil, also known as engine lubricant, with a density of approximately 0.91×10³ (kg/m³), serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption for the engine. It is often referred to as the "blood" of a car. 2. Oil pressure: During engine operation, normal oil pressure must be maintained. If the oil pressure is too low, the friction surfaces will wear out faster due to insufficient lubrication; if the oil pressure is too high, it can easily damage oil seals and pipes and consume engine power. When driving, the lubricating oil pressure is generally maintained between 0.2-0.5MPa.

3

1

Share

How is the point system calculated after merging a car driver's license with a motorcycle license?

How to Determine if a Vehicle Runs a Red Light?

What is the maximum wading depth of the BYD Tang?

How Does Insurance Cover Water Damage for New Cars?

How to Adjust Steering When the Right Side is Too Narrow During Right Reverse Parking

What is the identity of Audi cars with flashing lights?

What does the teapot dripping warning light indicate?

Where Does the Wiper Root Lead To?

What Causes the Abnormal Noise When Turning on the Air Conditioning in a Corolla?

What are the causes of transmission shift fork damage?

How is running a red light determined?