How does the no-parking zone enforcement work with camera captures?

1 Answers
Charles
07/30/25 7:37am
When a vehicle enters a no-parking zone, the camera will automatically capture an image. However, if the vehicle leaves the no-parking zone within five minutes, the photo will be automatically deleted, so the validity period is within five minutes. Here is additional information: 1. Parking in no-parking zones: Parking in no-parking zones is considered a violation. If someone needs to pick up or drop off passengers, it is recommended to detour or find a nearby area where temporary parking is allowed. If the "no-parking" sign prohibits temporary parking, then briefly stopping to pick up or drop off passengers is permitted. If you park in a no-parking zone but are outside the camera's range, do not encounter traffic police, and do not affect traffic or others' safety, the issue is minor. 2. Locations where parking is prohibited: Parking is not allowed in areas with no-parking signs or markings, on road sections with separation facilities between motor vehicle lanes and non-motor vehicle lanes or sidewalks, as well as on crosswalks and construction zones. Additionally, parking is prohibited at intersections, railway crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, and within 50 meters of these locations.
Was this review help?
3
5
Share
More Forum Discussions

How much air can be released from a tire in 10 seconds?

How much air can be released from a tire in 10 seconds mainly depends on whether the owner removes the valve core for deflation. If pressing the core by hand to release air, it may take about 1 minute or slightly longer to completely deflate. However, if the valve core is removed for deflation, then it only takes a few seconds to release all the air from a tire. Here is more information about the valve core: 1. Function of the valve core: The "valve core" is also known as the "airtight core." It is primarily used for tire inflation and preventing tire air leakage. 2. Classification of valve cores: Valve cores are mainly divided into: British valve needles, American valve cores, French valve cores, as well as German valve needles and Italian valve cores.
17
1
Share

What is the displacement of the Changan CS75?

1.5T engine displacement is 1499mL, 2.0T engine displacement is 1998mL, both meet the China VI environmental protection standard. The following is a related introduction about the Changan CS75: 1. Introduction: Inherits the family-classic design recognized by millions of users in terms of appearance. The large space, five-star safety strength, and power meet the needs of family car consumers. 2. Appearance: The international fashionable fluid body is eye-catching at first glance. Originating from Changan's global R&D platform, it once again introduces international avant-garde popular elements into the exterior styling design, creating a brand-new urban SUV with a strong sense of the times. The body is full of power, full of tension yet harmonious and stable, with a tough and impressive look that captivates at first glance. The front face highlights a fashionable big-mouth design, fully displaying its tough charm.
8
4
Share

How Long Does a Car Radiator Fan Generally Last?

High-quality car radiator fans typically have a service life of tens of thousands of hours. The lifespan depends on factors such as the type of bearings used, the operating environment temperature of the cooling fan, and the balance of the fan blades. Fans equipped with double ball bearings, which are considered high-end bearings, can last between 50,000 to 100,000 hours. Relevant information about car radiators is as follows: 1. Introduction: A car radiator generally refers to the heat exchanger (car radiator). The radiator is part of the car's cooling system, and the radiator in the engine's water cooling system consists of three parts: the inlet chamber, the outlet chamber, the main plate, and the radiator core. 2. Installation Methods: Radiators can be installed in three ways: same-side inlet and outlet, opposite-side inlet and outlet, and bottom inlet and outlet. Regardless of the method, it is essential to minimize the number of pipe fittings, as more fittings not only increase costs but also potential risks.
3
4
Share

What are the reasons for high fuel consumption in manual transmission cars?

Manual transmission cars have high fuel consumption due to obstructed air intake in the air filter. Clean or replace the air filter. The throttle valve is not closing properly; clean the throttle valve. Insufficient tire pressure. Engine oil is not filled according to the specified grade. Spark plugs have been used for too long, leading to decreased ignition energy. Engine coolant temperature is too high. Frequent braking, among other reasons. Below is related content: 1. Manual transmission cars: Cars that use a manual shift mechanical transmission to regulate speed. That is, the gear shift lever must be manually moved to change the gear meshing position inside the transmission, altering the gear ratio to achieve speed change. The gear shift lever can only be moved when the clutch is depressed. 2. Fuel consumption: Constant speed fuel consumption is the vehicle's fuel consumption per 100 kilometers obtained in the constant speed fuel consumption test specified by national standards for certain types of vehicles.
18
3
Share

What are the symptoms of a faulty manual transmission shift mechanism?

The most direct symptom of a faulty shift mechanism is the inability to change gears normally or experiencing extreme difficulty when shifting. Below are the relevant details: 1. Car shift structure: It consists of the gear lever, cables, gear selection and shift structure, shift forks, and synchronizers. The gear lever facilitates control over the gears, engaging and disengaging them. The cables function to pull the gear position, enabling gear shifting. The gear selection and shift structure differentiate between gear engagement or gear changes. The shift forks and synchronizers are responsible for engaging and disengaging the gear teeth of each gear. 2. Requirements for the transmission control mechanism: After engaging a gear, it must ensure full engagement of the coupling sleeve with the coupling gear ring. Under conditions such as vibration, the control mechanism must prevent the transmission from engaging or disengaging gears on its own. For this purpose, a self-locking device is installed in the control mechanism. To prevent the transmission from jamming or being damaged by simultaneously engaging two gears, an interlock device is installed in the control mechanism. To prevent accidental engagement of reverse gear while the car is moving forward, which could lead to part damage, a reverse gear lock device is installed in the control mechanism.
19
0
Share

What does the Mercedes B3 maintenance due mean?

It means that the scheduled maintenance time for the vehicle has arrived. Specific maintenance items need to be checked at the dealership. Below is relevant information about vehicle maintenance: 1. Maintenance schedule: The first maintenance for a car is typically due at 5,000 kilometers or six months, while the second maintenance is usually due at 10,000 kilometers or one year. 2. Maintenance locations: You can go to a repair shop or a 4S dealership for maintenance. Repair shops offer faster service and lower prices, but the quality may not be guaranteed. 4S dealerships have longer wait times, offer warranty coverage, but are more expensive.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.