How does the Hyundai Mistra perform on the highway?

Can a driver's license be inspected in another location?

Vehicles can be inspected in another location. After September 1, 2018, cross-province inspections for small cars, trucks, and medium-sized buses have been fully implemented. Applicants can directly inspect their vehicles and apply for inspection qualification marks in provinces other than where the vehicle is registered, without the need to go through the entrusted inspection procedures. Additional information: The following are the precautions for handling an out-of-town vehicle inspection: 1. Handling the vehicle inspection authorization letter: First, the owner needs to obtain a notice of entrusted inspection from the original registration vehicle management office. When handling this, there is no restriction that the owner must go in person, so the owner can have a friend handle it on their behalf at the original registration location. 2. Materials required for the authorization letter: The owner's ID card, driving license, vehicle insurance information, original and photocopy of the vehicle and vessel tax, and an application for out-of-town inspection, etc.

12

3

Share

How to Wash Paint Stains Off a Car?

Here are solutions for removing paint stains from a car: 1. Banana Oil. Commonly known as thinner, banana oil can be used by dipping a towel into it and gently wiping the paint spots to dilute the paint. It is very effective for cleaning paint spots, followed by rinsing with clean water. However, banana oil is toxic, volatile, and somewhat corrosive, which may damage the car paint, so extra caution is needed when using it. 2. Gasoline. Gasoline can dissolve paint effectively with minimal corrosiveness. The usage steps are the same as with banana oil. 3. Alcohol. Paint can be removed by wiping with alcohol (industrial alcohol). Use a soft cotton cloth dipped in alcohol and gently wipe the paint stains. 4. Essential Balm. Essential balm can dissolve paint and is also useful for cleaning paint spots, with the same method as alcohol. 5. Tar Remover/Paint Thinner. Tar remover can also dissolve paint. Spray it evenly on the paint spots, wait for a while to soften and dissolve the paint, then wipe with a towel, and finally rinse with clean water.

2

Share

What is the difference between a flooded car and a water-damaged car?

Here are the differences between a flooded car and a water-damaged car: 1. Different concepts: (1) A flooded car refers to a vehicle that has been submerged in water, generally meaning the engine and transmission have been soaked, with the water depth exceeding the wheels and vehicle seats, and the bottom components of the vehicle being in prolonged contact with water. Such vehicles pose significant risks, as the electrical circuits are prone to short circuits and fires. (2) A "water-damaged car" refers to vehicles that, due to heavy rain, were parked in underground garages or low-lying areas and could not be moved by the owners in time, resulting in prolonged soaking by accumulated water. 2. Different levels of water ingress: (1) A flooded car refers to a vehicle directly submerged in water, with the water depth exceeding one-third of the wheel height. In reality, both wading and flooding affect the vehicle, with the extent of the impact depending on the water depth. (2) A water-damaged car has been soaked for a long time, with a higher level of water ingress than a flooded car.

1

3

Share

How to Determine the Production Date of a Tire?

Tire's molded DOT mark is followed by an 11-digit alphanumeric code which serves as the tire's identification number or serial number. The last four digits of this serial number indicate the production date of the tire. Here is some information about tires: 1. The date code consists of four digits "AABB". The first two digits "AA" indicate the week of the year, while the last two digits "BB" represent the year. The tire production date code format is as follows: the first two digits denote the production week, and the last two digits indicate the production year. For example, 1204 means the tire was produced in the 12th week of 2004. 2. A tire is a circular elastic rubber product mounted on various vehicles or machinery to roll on the ground. It is typically installed on a metal rim to support the vehicle body, absorb external shocks, maintain contact with the road surface, and ensure the vehicle's driving performance. 3. Tires are often used under complex and demanding conditions. During operation, they endure various deformations, loads, forces, and extreme temperature effects. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning performance. Additionally, they require high wear resistance, flex resistance, low rolling resistance, and minimal heat generation. Half of the world's rubber consumption is used for tire production, highlighting the significant demand for rubber in tire manufacturing.

20

3

Share

What is the fuel tank capacity of the Borgward BX5?

The fuel tank capacity of the Borgward BX5 is 60 liters, as officially announced. Owners who have purchased the Borgward BX5 can also check this information on the vehicle's configuration sheet. The Borgward BX5 requires 92-octane fuel, with a fuel consumption of 5.8-7.6L per 100 kilometers. A full tank can cover a distance of 789-1034 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is the volume from the bottom of the tank to the safety limit, and there is still some space from the safety limit to the tank opening. This space is reserved to allow for fuel expansion when the temperature rises, preventing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.

7

2

Share

Which company owns the MG brand?

MG is a brand owned by SAIC Motor Corporation, making it a domestic Chinese brand. Currently, MG produces models such as the MG7 series, MG3 series, MG6 series, and MGTF sports cars. Its production base for the Chinese market is located in Nanjing, while its international market base is in Longbridge, UK. Below are specific details about MG: Introduction to MG: The English name for MG is MORRIS GARAGE. Originally a British automotive brand, it was acquired by China. The Morris Garages (MG) was established in 1910. The first Morris car was manufactured in the town of Cowley in 1920. In 1924, MG Motor Company was founded, primarily producing convertible sports cars. On July 22, 2005, Nanjing Automobile Group Co., Ltd. successfully acquired British MG Rover Group and its engine production division, marking the first acquisition of a renowned foreign automotive company by a Chinese enterprise. The merged company was named Nanjing MG Automobile Co., Ltd. In April 2007, SAIC Motor Corporation (SAIC Group) fully acquired Nanjing Automobile Group, thereby becoming the new owner of the MG brand. MG's product lineup: MG5, MG6, MG ZS, MG HS, MG ONE, MG Pilot, MG Pilot New Energy, and MG EZS pure electric vehicle.

11

0

Share

How does the Hyundai Mistra perform on the highway?

Can a driver's license be inspected in another location?

How to Wash Paint Stains Off a Car?

What is the difference between a flooded car and a water-damaged car?

How to Determine the Production Date of a Tire?

What is the fuel tank capacity of the Borgward BX5?

Which company owns the MG brand?

What Vehicles Are Suitable for Shell Helix HX5 Engine Oil?

Does exhaust backfire damage the car?

What are the differences between the Mercedes-Benz E260 and E300?

How to Open the Trunk of Changan CS5?