How does the Hyundai Mistra automatically lock?

Do You Need to Turn on AC When Using Car Heater?

You do not need to turn on the AC when using the car heater, for the following reasons: 1. The AC button controls the switch of the air conditioning compressor for cold air. It only regulates the operation of the cold air system and has no relation to the heating system. When you need warm air, simply turn on the heater button to provide warmth. 2. The car heating system warms the air through a water-based heating process. The heat for the warm air mainly comes from the engine's circulating coolant, and it does not use the air compressor. 3. There is no need to use the AC button when heating, as the car's air conditioning compressor consumes fuel. Turning it on would lead to unnecessary fuel consumption and waste.

14

2

Share

What Causes a Car to Fail the Exhaust Emission Test?

Main reasons for a car failing the exhaust emission test are as follows: 1. High sulfur and phosphorus content in gasoline, which can form chemical complexes on the surface of the oxygen sensor and the three-way catalytic converter. 2. Congested city roads with frequent stops, starts, and idling, leading to incomplete combustion products adhering to the surface of the three-way catalytic converter. 3. Carbon deposits and particulate matter in the engine can clog the three-way catalytic converter. Solutions for failing the exhaust emission test: 1. Drive in 4th gear at speeds typical for 5th gear for several dozen kilometers. 2. Keep the engine warm by not turning it off while idling, and rev the engine in neutral for 3-5 minutes before the test. 3. Regularly clean the three-way catalytic converter.

2

1

Share

How to Claim Compensation for New Car Quality Issues?

The new car three-guarantee regulations stipulate that consumers can choose replacement or refund under the following circumstances, and the seller shall be responsible for replacement or refund: 1. If the vehicle has undergone two repairs for serious safety performance failures, and the failures have not been resolved or new serious safety performance failures have occurred. 2. If the same major component of the steering system, braking system, suspension system, front/rear axle, or body has been replaced twice due to quality issues and still cannot function normally. 3. If the engine or transmission has been replaced twice, or if the same major component of the engine or transmission has been replaced twice due to quality issues and still cannot function normally. The replacement counts for the engine, transmission, and their major components are not cumulative.

18

1

Share

How Long Should the Interval Between Subject 2 and Subject 3 Be?

The interval between Subject 2 and Subject 3 is approximately 10-30 days. There are differences in the interval between Subjects 2, 3, and 4 for small and large vehicle driver's licenses. The common scheduling intervals for C1 and C2 small car driver's licenses are as follows: Subject 1: After the driving school submits the registration information to the vehicle management office, it usually takes 7-15 days for the review to be completed. Once approved, you can schedule Subject 1. Subject 2: You can start scheduling Subject 2 10 days after passing Subject 1. Subject 3: The driving test must be taken in order. After passing Subject 1, you must wait 20 days before scheduling Subject 2. After passing Subject 2, you must wait 10 days before scheduling Subject 3. For C2, you can schedule Subject 3 20 days after passing Subject 1. Subject 4: Subject 4 can be scheduled together with Subject 3, as Subject 4 is essentially a branch of Subject 3, but it is commonly referred to as Subject 4. Subject 3 Practice Notes: Master the lighting operations to avoid stalling. Be proficient in starting-related operations to avoid issues like stalling during startup, rolling back, or forgetting to release the handbrake. During straight-line driving, keep the steering wheel steady, maintain a proper posture, and look far ahead. Be skilled in gear shifting (upshift by listening to the engine sound, downshift by observing speed). When passing intersections, crosswalks, bus stops, etc., control speed appropriately and maintain awareness and safety. For turn signals, such as lane changes, overtaking, U-turns, or pulling over, wait at least 3 seconds before moving the steering wheel. Master pulling over within 30 cm. Subject 3 Exam Tips: Stay calm and avoid nervousness: Avoid focusing solely on the road ahead due to nervousness, which may cause you to forget to observe the surroundings. Many candidates make mistakes during turns or evasions under such tension. Therefore, during the Subject 3 test, avoid fixating on the road ahead and always observe the surroundings and rearview mirrors to prevent accidents. Familiarize yourself with the vehicle's gears: Do not overlook the basics of gear operation. Avoid instinctively looking at the gearshift when nervous, as this will result in immediate disqualification by the examiner, regardless of other performance aspects. Thus, be familiar with the gears during the Subject 3 test. Master clutch control: Especially during gear shifts, be proficient in operating the clutch pedal. React quickly to situations to leave a calm impression on the examiner, making it easier to pass the test.

5

0

Share

What engine does the Mitsubishi Grandis use?

Mitsubishi Grandis is equipped with a 2.4-liter naturally aspirated engine across the entire lineup, and the power of this engine is quite decent. Here are the specific details about the Mitsubishi Grandis: 1. The 2.4-liter naturally aspirated engine of the Mitsubishi Grandis delivers 163 horsepower and a maximum torque of 216 Nm. The engine reaches its maximum power at 6000 rpm and its maximum torque at 4000 rpm. This engine features MIVEC technology and multi-point fuel injection, and it uses an aluminum alloy cylinder head and block. The engine is paired with a 4AT transmission. 2. The Mitsubishi Grandis offers a spacious interior, as it is an MPV model. The dimensions of the Mitsubishi Grandis are 4780 mm in length, 1835 mm in width, and 1680 mm in height, with a wheelbase of 2830 mm.

19

2

Share

Where is the VIN on the vehicle license?

The VIN is located in the "Vehicle Identification Number" column on the vehicle license. The Vehicle Identification Number, abbreviated as VIN, is a unique set of 17 alphanumeric characters used to identify a vehicle's manufacturer, engine, chassis number, and other specifications. Below is additional information about the VIN: 1. The reason the VIN is printed on the vehicle license is that the VIN serves as an explanation and description of the vehicle license. It acts as the vehicle's ID card, indicating the brand and model of the car, and is the manufacturer's unique identifier for the vehicle, serving as the sole proof for vehicle information recognition. 2. Just as buying a house comes with a property deed, purchasing a vehicle comes with a motor vehicle registration certificate, which is the legal proof of vehicle ownership. It is kept by the vehicle owner and is not carried in the vehicle. It records the vehicle's details, functioning as the vehicle's household registration. 3. Therefore, as proof of property, the motor vehicle registration certificate also includes the Vehicle Identification Number. Of course, the VIN is also present on the vehicle frame, but it is usually only visible when the vehicle is in a bare-body state. This makes it impractical to view the actual VIN on a normally used vehicle.

19

4

Share

How does the Hyundai Mistra automatically lock?

Do You Need to Turn on AC When Using Car Heater?

What Causes a Car to Fail the Exhaust Emission Test?

How to Claim Compensation for New Car Quality Issues?

How Long Should the Interval Between Subject 2 and Subject 3 Be?

What engine does the Mitsubishi Grandis use?

Where is the VIN on the vehicle license?

What Causes CVT Transmission Failure?

How to Open the Engine Hood?

When to Use the S Gear in a Car?

How much does the Volkswagen Magotan weigh?