How does Maserati look?

Can You Change Engine Oil Without Replacing the Oil Filter?

You cannot change engine oil without replacing the oil filter, and the reason is: if you don't replace the filter, the dirt in the oil filter will re-enter the oil circuit and affect the normal operation of the engine. The precautions for changing engine oil are: 1. Choose the right oil for your vehicle; 2. Change the oil as much as possible when the engine is warm, and drain the oil completely; 3. The oil filter must be replaced when changing the oil; 4. The amount of oil added should be appropriate, based on the oil dipstick; 5. After adding the oil, start the engine and check whether there is any leakage in each component. The steps for changing engine oil are: 1. Lift the vehicle with a jack, find the drain bolt and unscrew it to drain the oil; 2. After unscrewing the oil filter, place a container underneath; 3. Replace with a new oil filter and add new oil.

14

5

Share

How to Open and Replace the Battery in a Kia K5 Key Fob?

The method to open and replace the battery in a Kia K5 key fob is as follows: 1. Remove the key part; 2. Use a one-yuan coin to twist open the key fob along the groove; 3. Replace the old battery with a new one. Taking the 2020 Kia K5 as an example, it is a mid-size sedan with body dimensions of 4855mm in length, 1835mm in width, and 1475mm in height, and a fuel tank capacity of 70 liters. The 2020 Kia K5 is equipped with a 2.0L inline 4-cylinder naturally aspirated engine, delivering a maximum horsepower of 156PS, a maximum power of 115kW, a maximum torque of 189Nm, and is paired with a 6-speed automatic manual transmission.

20

2

Share

How many days can a new car be driven without a temporary license plate?

A new car cannot be driven without a temporary license plate. Driving without a license plate may result in the vehicle being impounded and fines. Relevant regulations: According to the relevant provisions of the Road Traffic Safety Law, if a motor vehicle is driven without displaying a license plate, the traffic management department of the public security organ shall detain the vehicle, notify the party to provide the corresponding license plate, and impose a fine and deduct 12 points in accordance with Article 90. Procedure for obtaining a temporary license plate: The owner only needs to bring their ID card, car purchase invoice, compulsory insurance policy (copy), the original vehicle factory certificate and a copy, then go to the vehicle management office window to apply for a temporary license plate, fill out the application form, submit the relevant materials, and after review, receive the temporary driving license.

7

0

Share

Is it necessary to depress the clutch when stalling the engine?

It is necessary to depress the clutch to avoid damage to mechanical components caused by excessive transmission load. Below is a detailed introduction about the automotive clutch: 1. Overview: The automotive clutch is located within the flywheel housing between the engine and the transmission, with the output shaft of the clutch serving as the input shaft of the transmission. During vehicle operation, the driver can depress or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine with the transmission, thereby cutting off or transmitting the engine's power input to the transmission. 2. Principle: The driving and driven parts of the clutch utilize friction between contact surfaces, or use liquid as a transmission medium, or employ magnetic transmission (electromagnetic clutch) to transmit torque, allowing temporary separation and gradual engagement between the two parts while permitting mutual rotation during the transmission process.

14

2

Share

How to Set Up Automatic Locking for the Vezel?

The method to set up automatic locking for the Vezel is as follows: 1. Put the car in P (Park) gear; 2. Turn the key to the ON position; 3. Close all four doors; 4. Press and hold the lock button for 6 seconds until the hazard indicators on the dashboard flash twice, indicating the setup is complete. The Vezel is a compact SUV. Taking the 2020 Vezel as an example, its body dimensions are: length 4328 mm, width 1772 mm, height 1605 mm, with a wheelbase of 2610 mm. The 2020 Vezel is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 96 kW and a maximum torque of 155 Nm, paired with a 6-speed manual transmission.

2

4

Share

When was the last batch of China III vehicles produced in 2014?

The last batch of China III vehicles was produced in July 2014. Introduction to China III Standard: The so-called China III standard refers to China's third-stage vehicle emission standard. The national third-stage emission standard is equivalent to the Euro 3 emission standard, meaning the content of tailpipe pollutants is comparable to Euro 3 levels. Currently, the maximum scrapping period for China III vehicles remains 15 years. Vehicle Scrapping Mileage: China's new vehicle scrapping regulations clearly stipulate that private cars must reach a mileage of 600,000 kilometers before being eligible for scrapping. However, many China III vehicles have not even reached 600,000 kilometers. Truck Scrapping Period: The mandatory scrapping period for light and heavy trucks is 10 years, but it can be extended up to 5 years. Therefore, the mandatory scrapping period for China III trucks is neither 8 years nor 10 years, but should be 15 years.

6

5

Share

How does Maserati look?

Can You Change Engine Oil Without Replacing the Oil Filter?

How to Open and Replace the Battery in a Kia K5 Key Fob?

How many days can a new car be driven without a temporary license plate?

Is it necessary to depress the clutch when stalling the engine?

How to Set Up Automatic Locking for the Vezel?

When was the last batch of China III vehicles produced in 2014?

Where is the keyhole of the Tiida car located?

Why can't I shift gears when starting with the clutch depressed after stalling?

How to Steer the Wheel for Right-side Parking?

Does frozen windshield washer fluid have any impact?