···
Log in / Register

Fuel consumption of Changan CS55 owners?

6Answers
JuneFitz
09/04/2025, 04:28:55 AM

Changan CS55 fuel consumption is as follows: Combined cycle fuel consumption: 8.4L/100km; Urban cycle fuel consumption: 9.3L/100km; Suburban cycle fuel consumption: 7.3L/100km. Here are the specific reasons for high fuel consumption: 1. Insufficient tire pressure: Please pay attention to tire condition regularly, maintaining proper tire pressure not only saves fuel but also extends service life. 2. Vehicle malfunction: Leading to reduced efficiency, such as insufficient cylinder pressure, ignition failure, or fuel system issues. Please return to the dealership for inspection and repair. 3. Brake dragging: You can perform a slow neutral coasting test yourself to confirm there's no brake dragging. 4. Urban driving: Stop-and-go traffic and traffic lights in urban areas can result in fuel consumption several times higher than highway driving. 5. Short-distance use: If your workplace is very close to home, the engine may not reach normal operating temperature before arriving at the destination. Since cold engines are less efficient, most fuel is consumed heating the engine and coolant, making high fuel consumption unavoidable. This usage pattern can also lead to engine carbon buildup.

Was this review help?
116
Share
FelicityRose
09/16/2025, 10:29:04 PM

As an owner of the Changan CS55, I've been driving it for almost a year now, mostly in the city. The average fuel consumption is around 8.5L/100km, but it can spike up to 10L when stuck in traffic. On the highway, it's much more comfortable, usually just over 7L. Driving habits are crucial—aggressive acceleration or sudden braking immediately increases fuel consumption. Using the AC in summer adds about 0.5L to the fuel consumption, which hurts the wallet a bit. I've also noticed that regular maintenance helps save fuel. Every time I change the oil and check the tire pressure, the car runs smoother and fuel consumption becomes more stable. Overall, as an SUV, the CS55's fuel consumption isn't particularly high or low—it's above average in its class. It's suitable for city commuting and can handle long trips well. The key is to drive gently and maintain it diligently, which can easily save hundreds of dollars in fuel costs over a year.

Was this review help?
19
Share
Expand All
SanTessa
10/30/2025, 11:00:40 PM

I've been driving for over 20 years and have tried many cars. The CS55's fuel consumption performance is quite realistic. In urban areas, it usually fluctuates around 9L, while on highways it easily achieves 7-8L, with a combined average of 8.5L being common. The main factors affecting fuel consumption are road conditions and load. In city traffic jams, it can go up to 10L, while on highways with no load, it can drop to 7L. Driving style is also crucial—smooth acceleration and less sudden braking can save about 1L in fuel consumption. Running the AC and audio system at full blast might increase consumption by half a liter, which is no big deal. Fellow car owners often mention that cleaning the air filter and spark plugs during maintenance helps keep fuel consumption more stable. As an SUV, the CS55's fuel performance is decent. If you buy this car, you should accept these consumption fluctuations, but with careful daily driving, it's not much of a worry.

Was this review help?
19
Share
Expand All
Thomas
12/13/2025, 10:08:18 PM

I've been driving the CS55 for two years now, using it daily to take my kids to school. The average fuel consumption is around 8.5L, reaching up to 10L in city traffic jams, while on highways it easily drops to 7L. For family use, when carrying more passengers or luggage in the back seat, fuel consumption increases by 0.5-1L, so I try to travel light to save fuel. Using air conditioning in summer or heating in winter also raises consumption slightly, but overall it stays within budget. By avoiding sudden acceleration and maintaining the tires and engine regularly, I've been able to keep fuel consumption stable.

Was this review help?
4
Share
Expand All
MacCecilia
02/02/2026, 11:08:39 PM

Having interacted with many CS55 owners, the common fuel consumption is around 8-10L in urban areas and 7-8L on highways, with a comprehensive average of approximately 8.5L with slight variations. Issues often stem from driving habits and maintenance, such as sudden braking and acceleration leading to a sharp increase in fuel consumption, or clogged filters causing the engine to consume more fuel. It is recommended to regularly change the engine oil, check tire pressure and electrical circuits, which can optimize fuel consumption by about 1L. Among car enthusiasts, many also use apps to record trips to save money and promptly inspect and repair when fuel consumption is high.

Was this review help?
15
Share
Expand All
ErinMarie
04/28/2026, 03:46:36 PM

With over a decade of driving experience, my CS55 maintains a stable combined fuel consumption of 8.5L. Urban commuting averages around 9L, while smooth highway driving drops it to just over 7L. Driving habits play the key role - steady driving shows obvious fuel savings; consumption rises slightly on mountainous roads or rainy days. Regular maintenance like air filter changes and proper tire inflation can reduce long-term consumption by half a liter. Vehicle age and fuel quality also significantly impact efficiency - newer cars consume less, and premium fuel enhances engine performance. Overall consumption is reasonable, keeping daily expenses manageable.

Was this review help?
6
Share
Expand All
More Q&A

What is car gear dragging?

Car gear dragging occurs due to: 1. Aging of the gear shifting mechanism; 2. Aging of the synchronizer; 3. Poor driving habits that cause long-term damage to the vehicle. The symptoms of car gear dragging include: 1. The engine sound becomes muffled; 2. Slow response and lack of speed when accelerating; 3. The car jerks forward and backward when releasing the accelerator. Car gear dragging refers to the mismatch between the gear position and the actual driving conditions, which can be divided into: 1. Low gear high drag: Forces the engine to operate at excessively high RPM, putting undue pressure on engine components; 2. High gear low drag: The engine RPM is too low, resulting in weak power output and a tendency to stall.
119
Share

What is the difference between water and antifreeze?

The differences between water and antifreeze are: 1. Different freezing points: The freezing point of water is 32 degrees; the freezing point of antifreeze is -40 degrees. 2. Different boiling points: The boiling point of water is 100 degrees Celsius; the boiling point of antifreeze is 108 degrees Celsius. 3. Different functions: Water can cause rust in the engine's water passages and lead to scale buildup; antifreeze prevents the coolant from freezing and cracking the radiator when parking in cold winter. Antifreeze is a coolant containing special additives, mainly used in liquid-cooled engine cooling systems, with excellent properties such as preventing freezing in winter, preventing boiling in summer, and preventing scale and corrosion all year round. The boiling point of water is 100 degrees Celsius. When the temperature reaches 100 degrees Celsius, water evaporates into steam and cannot serve as a coolant.
111
Share

What are the causes of transmission failure?

The causes of transmission failure include: 1. Excessive transmission oil temperature, leading to stubborn dirt and impurities forming blockages, causing solenoid valves to operate poorly and fail to regulate oil pressure; 2. Wear or severe wear of internal transmission components, or damage to gear side surfaces; 3. Hardening and aging of transmission rubber sealing materials, resulting in leaks and reduced hydraulic pressure. The functions of a transmission are: 1. To change the transmission ratio and expand the range of torque and speed variation of the driving wheels; 2. To enable the vehicle to reverse while maintaining the engine's rotation direction; 3. To use neutral gear to interrupt power transmission, allowing the engine to start, idle, and facilitate gear shifting or power output.
116
Share

Can front fog lights be installed on a car?

Front fog lights cannot be installed on a car. From a legal perspective, private vehicle modifications are not allowed. If you want to modify fog lights, it is recommended to go to a 4S shop or a certified modification shop with a warranty, and choose original fog lights that match the vehicle model. During installation, pay attention to circuit safety issues such as switches, relays, fuse strips, and aftermarket lighting. Fog lights are yellow with a longer wavelength, which allows them to illuminate over a greater distance, providing better visibility in adverse weather conditions. The benefit of fog lights is this. Whether or not to install them is up to the owner. When purchasing a car, it is advisable to buy one with LED lights, which can not only directly replace fog lights but also indirectly enhance the car's grade.
110
Share

Does the Borgward BX6 have a China VI version?

Borgward BX6 does not have a China VI version. The Borgward BX6 is a compact SUV under the Borgward brand, with body dimensions of 4601mm in length, 1877mm in width, and 1656mm in height, a wheelbase of 2685mm, a fuel tank capacity of 60 liters, and a curb weight of 1655 kilograms. The Borgward BX6 is equipped with a 2.0T 224 horsepower L4 engine, with a maximum power of 165 kilowatts, a maximum power speed of 5500 revolutions per minute, and a maximum torque of 300 Newton meters. It is paired with a 6-speed automatic transmission, featuring MacPherson independent suspension at the front and multi-link independent suspension at the rear.
107
Share

Do Front and Rear Brake Pads Need to Be Replaced Together?

Front and rear brake pads do not need to be replaced together as they have different replacement cycles. Compared to front brake pads, rear brake pads generally have a longer service life. Under normal driving conditions, front brake pads typically need replacement every 30,000 to 50,000 kilometers, while rear brake pads can last about 60,000 to 100,000 kilometers before requiring replacement. The replacement interval for brake pads is not only directly related to their service life but also depends on the vehicle's driving conditions and individual driving habits. New brake pads are approximately 1.5 cm thick, and when they wear down to only one-third of their original thickness (about 5 mm), they should be replaced promptly. When replacing brake pads, both pads on the same axle must be changed simultaneously to ensure balanced braking performance on both sides.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.