Does Turning the Steering Wheel While Braking in Place Damage the Car?

2 Answers
LaJohnny
07/24/25 7:06am
Turning the steering wheel while braking in place does not damage the car. Below are some related introductions about car maintenance: 1. First maintenance: Some manufacturers will set the first maintenance based on time or mileage. The exact first maintenance time should be referred to the vehicle's user manual or warranty manual. The first maintenance is very important and free, so be sure to remember to do it to avoid missing it and affecting the car's three-guarantee issues. 2. Maintenance items: The main maintenance items for a car include replacing engine oil, oil filter, transmission fluid, spark plugs, air conditioning filter, air filter, brake fluid, etc. However, not every maintenance requires replacement; it depends on the service life. In addition, maintenance also involves inspection and upkeep of dozens of items across multiple systems such as the engine, transmission, air conditioning system, steering system, braking system, suspension, body, and tires.
Was this review help?
14
2
Share
CodyLee
08/11/25 2:48am
Regarding the issue of turning the steering wheel while stationary with the brakes applied, I believe it does cause some damage to the car, but not catastrophic. The tires are forcibly rubbed in a fixed position, which can easily lead to uneven wear. Over time, the tread may flatten or even crack, shortening the tire's lifespan. For the steering system, especially in vehicles with power steering, the power steering pump bears additional pressure when turning the wheel while stationary, and the increased oil temperature may lead to premature aging. I've seen many cars on the road develop abnormal steering or increased noise due to this habit. To protect your beloved car, I recommend letting the wheels move slightly before turning the steering wheel when parking, keeping the car in slight motion while operating. This way, you neither harm the car nor compromise comfort. Developing good habits will result in lower maintenance costs and a more worry-free driving experience.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

Why does the Pajero V73 not move when shifting gears?

Pajero V73 not moving when shifting gears, it is recommended to check the clutch. Introduction to Pajero: The Pajero SPORT model is a famous vehicle developed and produced by Mitsubishi Motors Corporation of Japan in 1998, with significant improvements made in 2002. It was the first model allowed to be produced overseas under the PAJERO SPORT trademark. Due to its unique off-road driving performance, it is highly popular among car enthusiasts and holds a significant share in the off-road vehicle markets of Europe and America. It is equipped with advanced features, including a 2.972-liter V6 24-valve engine that meets the latest emission regulations, achieving Euro III standards. It comes with a 5-speed manual transmission or a 4-speed intelligent electronically controlled automatic transmission, allowing easy selection between four-wheel drive (or two-wheel drive). The front suspension adopts a double-wishbone independent suspension system, providing excellent off-road performance, placing its technical level among the top in the world's off-road vehicle models. Solution: It is recommended to warm up the car, especially in colder northern cities where the engine noise may be louder during startup. Generally, warming up for about 20 seconds is sufficient, depending on the RPM. Alternatively, you can first power on for self-inspection before starting the engine.
8
0
Share

What is the fuel tank capacity of the Audi A3?

The fuel tank capacity of the Audi A3 is 55 liters. The vehicle body adopts lightweight design and aluminum materials, and is powered by multiple engines including the 1.4TFSI and 1.8TFSI. The front suspension of the Audi A3 chassis is MacPherson type, and the rear axle features a torsion and crank structure with separately arranged springs and shock absorbers. The dimensions of the Audi A3 are 4292mm in length, 1765mm in width, and 1423mm in height, with a wheelbase of 2578mm. Among vehicles in the same class, the 2022 Audi A3 Sportback 35TFSI Progressive Sport model has a fuel tank capacity of 51L, and the 2022 Audi A3L Limousine 35TFSI Progressive Sport model also has a fuel tank capacity of 51L. During the actual refueling process, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This space ensures that the fuel inside the tank can expand when the temperature rises without overflowing the tank's safety space. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the calibrated tank capacity. If the owner wants to know the remaining fuel level, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the pointer is close to E, it indicates low fuel, and when it is near F, it means the fuel level is sufficient.
14
3
Share

What to Do When BYD Tang Tire Pressure Signal is Abnormal?

BYD Tang tire pressure monitoring signal reset method is: 1. Adjust the underinflated tire pressure to the standard value. 2. Drive at a constant speed of 40km/h for about 10 minutes, and the tire pressure monitoring system will rematch. 3. After successful matching, the tire pressure light will automatically turn off and reset. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: Usually, an alarm will sound when the pressure is below 1.8bar or above 3.0bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the original data, and the tire pressure monitoring indicator light will remain on. At this time, simply perform a tire pressure reset. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged due to impact while driving, the tire pressure fault light will also turn on. For sensor damage issues, only a new replacement part can be used.
11
4
Share

Where is the battery located in an Audi A6?

In older models of the Audi A6, the battery is located under the rear seats. In the latest A6 models, the battery is in the trunk at the rear of the car. There is a handle on the floor panel; pulling it up reveals the battery and the spare tire. Audi A6 battery maintenance methods: 1. Avoid parking the car in an open parking lot for extended periods. If long-term parking is necessary, remove the battery to prevent it from freezing and getting damaged. 2. In winter, the car engine may be harder to start. Each attempt to start the engine should not exceed 5 seconds, with an interval of at least 15 seconds between attempts. If the engine still doesn't start after several attempts, check other aspects such as the circuit, ignition coil, or fuel system. Avoid continuous multiple attempts to start the engine, as this can cause the battery to over-discharge and burn out. 3. The car battery should be charged regularly. If left unused for a long time, the battery will gradually discharge on its own until it becomes unusable. Therefore, start the car periodically to charge the battery. 4. Clean the battery terminals regularly and apply specialized grease to protect the wiring harness. Frequently inspect the battery's accessories and connecting wires. 5. Avoid using car electronics after the engine is turned off. Using the battery alone when the engine is not generating electricity can cause damage to it.
13
1
Share

What Causes Low-Speed Brake Vibration?

Low-speed brake vibration is primarily caused by wear and tear on the brake discs and friction pads. The specific reasons for low-speed brake shaking are as follows: 1. There may be metal debris, sand, or other foreign objects between the brake pads and brake discs, which create noise when rubbing against each other during braking. To address this issue, you can try firmly pressing the brakes in a safe area. As long as it doesn't affect normal braking performance, there's no need to worry. 2. Newly replaced or modified brake pads may initially have a harder material composition than the brake discs, making them more prone to noise. This situation also doesn't require concern, as the noise will gradually diminish with normal use over time. 3. If regular maintenance is neglected for an extended period, causing the brake system to malfunction, it may directly rub against the protective metal plates on the brake pads. This can produce particularly sharp metal friction sounds or even sparks, necessitating immediate replacement in such cases. 4. There are various reasons for low-speed gear vehicle occurrences, depending on the vehicle model and condition. First, let's rule out the semi-engaged clutch state in manual transmissions, which can be resolved by applying more throttle or promptly depressing the clutch pedal—this is a normal phenomenon. 5. Additionally, issues with the vehicle itself, such as excessive carbon buildup causing the low-speed engine to run unevenly and produce vibrations, or long-overdue spark plug replacements leading to excessive oil sludge, misfires, and abnormal ignition, can also result in shaking.
6
2
Share

Should the 2020 Buick Regal use 92 or 95 octane fuel?

For the 2020 Buick Regal, the 1.5T model is recommended to use 92 octane gasoline, while the 2.0T model should use 95 octane gasoline. These fuel grades are officially recommended in the vehicle's user manual. In addition to checking the appropriate gasoline grade in the user manual, the 2020 Buick Regal also indicates the recommended fuel grade on the fuel filler cap. Typically, the fuel grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. If the compression ratio is even higher, 98 octane gasoline is recommended. However, with the application of new technologies, the compression ratio alone cannot determine the appropriate fuel grade, as high compression ratios can also be tuned to use lower octane fuel. Other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the 2020 Buick Regal occasionally uses the wrong gasoline grade, simply switch back to the correct grade after the current tank is used up. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles that require low-octane fuel, using a higher octane fuel will not cause damage, but the increased octane number can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles that require high-octane fuel, using a lower octane fuel can cause engine knocking. Because the octane number is significantly lower, the fuel's ignition point decreases, causing premature ignition during the compression stroke. If the fuel ignites before the spark plug fires, resistance occurs during the upward stroke. This resistance makes the engine run very unstably. If the knocking is mild, it may only increase noise without obvious damage to the engine. However, if the knocking is severe, it indicates serious engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.