···
Log in / Register

Does the Wrangler Automatic Convertible Version Leak Water?

5 Answers
LeRowan
07/29/25 8:07am
The Wrangler automatic convertible version does not leak water. Taking the 2020 automatic convertible Wrangler as an example, it belongs to the mid-size SUV category with body dimensions of 4882mm in length, 1894mm in width, 1848mm in height, a wheelbase of 3008mm, and a fuel tank capacity of 81.4 liters. The 2020 automatic convertible Wrangler features a multi-link solid axle front suspension and a multi-link solid axle rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 266PS, a maximum power of 195.4kW, and a maximum torque of 400Nm, paired with an 8-speed automatic transmission.
Was this review help?
13
0
Share
McJameson
08/13/25 3:51am
I experienced a leaking issue with my Jeep Wrangler's automatic convertible top. Once during heavy rain while driving home, water slowly seeped through the gaps in the roof, slightly wetting the seats. It was quite frustrating at the time, but I later learned that soft-top designs on convertibles are prone to leaks as they age, especially when the sealing rubber strips harden or crack over time. Now I always check the sealing condition before using it and try to avoid parking in open areas during rain. Regular cleaning of the convertible top is recommended to prevent dust from clogging the drainage holes, which could lead to worse water accumulation. If the leakage becomes severe, it's best to visit a professional shop to replace the sealing strips or adjust the hinge components - DIY attempts often just delay proper repairs. In short, driving this type of vehicle requires extra attention for preventive maintenance!
Was this review help?
8
5
Share
Expand All
HarrisonMarie
10/05/25 4:24am
As someone who frequently drives a convertible, I do think the automatic Wrangler may have leakage issues, as the soft-top material tends to deteriorate after prolonged exposure to wind and rain. Once while washing my car, I noticed water seeping in from the edges due to poorly designed drainage channels that can't handle heavy rainfall. My advice is to reinforce the waterproof seals immediately after purchase and always park in shaded areas to avoid accelerated damage from direct sunlight. If you notice any signs of leakage, address it promptly—delaying repairs could lead to more serious problems like electrical issues or moldy interiors. Additionally, conduct a simple test before each rainy season: use a garden hose to simulate rainfall and check for dripping spots. While leakage might seem like a minor issue, proper maintenance ensures a worry-free driving experience overall.
Was this review help?
17
3
Share
Expand All
VanBrooke
11/18/25 5:54am
Having used a convertible for several years, leaks are quite common on the automatic version of the Wrangler. I must say, checking during seasonal transitions is key: inspect whether the roof seals are intact, and replace them if they've aged. Water seepage is mostly due to hardened rubber or loose seams. If left unmaintained for long, it might leak onto the carpet or electrical systems. When parking, avoid putting pressure on the roof, and use a soft brush for cleaning to prevent scratches. If you notice a leak, don’t panic—usually, it’s caused by worn seals or clogged drainage holes. It’s recommended to have a mechanic inspect it every six months to address minor issues quickly. For DIY fixes, try using a waterproof spray first to see if it helps.
Was this review help?
20
2
Share
Expand All
McKarter
11/18/25 5:56am
Attention to new owners of the Wrangler automatic convertible: leakage issues are quite common. I once drove it on a long trip during heavy rain, and water seeped in slightly from the edges of the roof, which was unpleasant. Later, I learned some tips: regular maintenance is key—keep the sealing strips well-lubricated; dry the edges thoroughly after car washes; minimize driving in the rain or use a car cover. For repairs, visit a specialized shop to tighten the roof mechanism, which may involve replacing parts like sealing rubber or adjusting hinges. In the long run, adding extra waterproof layers or parking in a garage can prevent leaks. While not severe, leaks affect comfort—addressing them early saves hassle.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

What are the reasons for the Magotan not accelerating?

Car stepping on the accelerator but not accelerating may be due to the following reasons: Carbon deposit issue: Carbon deposit can be considered a common problem in cars. As the car is used, the interior may accumulate sludge or other dirt due to incomplete combustion, which can adhere to components and cause the engine to stall during operation. Road condition reasons: Apart from internal components, the reason for the car's inability to accelerate may also be related to road conditions. For example, driving on congested roads with frequent acceleration and deceleration can affect the car's components, preventing them from rotating promptly and resulting in the inability to accelerate and weak starting conditions.
11
4
Share

What brand is the Qashqai engine?

The brand of the Qashqai engine is Nissan MR20DE. The Qashqai is a compact SUV under Dongfeng Nissan, with body dimensions of: length 4401 mm, width 1837 mm, height 1593 mm, a wheelbase of 2646 mm, and a fuel tank capacity of 57 liters. The Qashqai is equipped with a 2.0L direct-injection naturally aspirated engine and a CVT continuously variable transmission, delivering a maximum power of 111 kW and a maximum torque of 194 Nm. Its front suspension type uses a MacPherson independent suspension, while the rear suspension type employs a multi-link independent suspension, with a front-wheel-drive configuration.
3
2
Share

What is the fuel tank capacity of the Volvo XC60?

Volvo XC60 has a fuel tank capacity of 70 liters. The fuel tank capacity refers to the size of the fuel tank, which measures the vehicle's ability to carry fuel and determines the driving range. In addition to storing fuel, the fuel tank in the hydraulic system also serves functions such as dissipating heat, separating air bubbles from the oil, and settling impurities. The Volvo XC60 is a mid-size SUV with a 5-door, 5-seat body structure. Its dimensions are 4688mm in length, 1902mm in width, and 1658mm in height, with a wheelbase of 2865mm. It features a double-wishbone independent front suspension and a multi-link independent rear suspension.
17
2
Share

In which provinces is ethanol gasoline used?

Ethanol gasoline is currently used in Liaoning, Jilin, Heilongjiang, Henan, Anhui, Guangxi, Jiangsu, Hubei, Hebei, Shandong, Tianjin, and Guangdong. The rational use of ethanol gasoline can provide more power for vehicles while also reducing emissions and minimizing carbon deposits. When using ethanol gasoline for the first time, it is recommended to thoroughly clean the fuel tank and fuel system, and also check for any sediment or water accumulation at the bottom of the tank. Ethanol gasoline is hydrophilic, and if the water content in the fuel exceeds the standard, it not only affects the normal operation of the engine but also shortens its service life.
7
2
Share

Does Not Turning Off the Engine While Refueling Damage the Car?

Generally, not turning off the engine while refueling does not harm the car, but it poses certain safety hazards. The vehicle's electrical equipment remains operational, and the engine runs at high temperatures. If there is any electrical leakage, it may easily trigger a fire. When refueling your car, always remember to turn off the engine and power. Only restart the engine and drive after refueling is completed and the fuel tank cap is securely closed. While the engine is running, the car's exhaust continuously emits fumes, often accompanied by sparks, which can also threaten the safety of the gas station. When refueling, as the concentration of fuel vapor increases to a certain level, any spark generated by the running engine could ignite and cause an explosion.
2
4
Share

What is the diagnostic method for oxygen sensor failure?

The diagnostic method for oxygen sensor failure is: 1. Warm up the engine to normal operating temperature; 2. Connect the negative probe of the multimeter's voltage range to the E1 terminal in the fault detection socket or the negative terminal of the battery, and connect the positive probe to the OX1 or OX2 terminal in the fault detection socket or the output wire on the oxygen sensor harness connector; 3. Keep the engine running at 2500 rpm and check if the voltmeter needle swings between 0 and 1V, recording the number of swings within 10 seconds; 4. Check if the oxygen sensor is damaged; 5. Inspect the appearance color of the oxygen sensor.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.