Does the Volvo S60 support wireless CarPlay?

How often should small cars be inspected in 2021?

Small and micro non-operational passenger vehicles must be inspected once every 2 years within the first 6 years; once every year after exceeding 6 years; and once every 6 months after exceeding 15 years. Below are the relevant details: 1. Vehicle Inspection: Vehicle inspection refers to a mandatory test for every vehicle that has obtained an official license plate and registration certificate. It is equivalent to an annual physical examination for the vehicle according to the "Technical Conditions for Motor Vehicle Operation Safety." Vehicle inspections can promptly eliminate potential safety hazards, encourage better vehicle maintenance, and reduce the occurrence of traffic accidents. 2. Notes: Vehicle inspections must be conducted in advance, and un-inspected motor vehicles cannot be driven on the road normally.

13

2

Share

Where is the Parking Light Switch Located?

The parking light is located on the instrument panel, represented by a 'P' inside a circle. The parking light switch is integrated with the instrument panel lights, license plate lights, and taillights, commonly referred to as the small light switch. When this switch is turned on, the parking lights, instrument panel lights, license plate lights, and taillights will illuminate. To turn them off, simply press the small light switch. Below are the applicable scenarios for parking lights: 1. When temporarily parked in dark environments to prevent pedestrians, bicycles, and other vehicles from colliding with the car; 2. Turning on the parking lights effectively serves as a safety warning and contour marker; 3. The parking lights are particularly effective when temporarily parked and leaving the vehicle on narrow provincial, county, or rural roads at night.

4

5

Share

What is the Rated Towing Mass?

Towing mass refers to the combined weight of the trailer and the cargo it carries. The rated towing mass is a theoretical value, also known as the "nominal towing capacity." It represents the total mass of the vehicle and the towed object, which includes the mass of the vehicle itself plus the mass of the towed object. The towing force should be applied to this total mass. Therefore, when calculating the towing mass tonnage, the mass of the towed object should not be considered merely as the nominal towing capacity. Additional information: Below are some key points regarding the rated towing mass: 1. Total vehicle mass for license purposes: This refers to the vehicle's curb weight + the rated passenger capacity (number of passengers in the cabin × average weight of 65 kg per person). 2. Curb weight: The mass of the vehicle itself. 3. Rated cargo capacity: The standard mass of cargo the vehicle is designed to carry. 4. Rated towing mass: The total mass a semi-trailer can tow, including the mass of the towed vehicle and cargo. This is the sum of the mass of the tractor (excluding the driver and fuel), the mass of the towed vehicle, and the mass of the cargo.

1

4

Share

What are the test items for an automatic transmission driver's license?

Here is an introduction to the test items for an automatic transmission driver's license: 1. The automatic transmission driver's license is referred to as C2, and the test subjects are the same as those for C1. It requires passing three subjects and four tests. 2. Subject 1 test content includes: road traffic, traffic signals, traffic safety violations and accident handling, application and use of motor vehicle driver's licenses, motor vehicle registration regulations, and other road traffic safety laws, regulations, and rules. 3. Subject 2 test content includes: small cars, small automatic transmission cars, small automatic transmission passenger cars for the disabled, and low-speed trucks; test items include reversing into a garage, stopping and starting on a slope, parallel parking, curve driving, and right-angle turns. 4. Subject 3 road driving skills test content includes: large buses, tractors, city buses, medium-sized buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, and small automatic transmission passenger cars for the disabled; test items include preparation before driving, starting, driving straight, shifting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting other vehicles, overtaking, making U-turns, and night driving. 5. Subject 3 safe and civilized driving knowledge test content includes: requirements for safe and civilized driving, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and knowledge of handling after traffic accidents.

20

0

Share

Is the Wanliyang CVT25 a steel belt or a chain?

The Wanliyang CVT25 structure adopts a steel belt for transmission. Below is the relevant introduction: 1. CVT: CVT refers to a type of automotive transmission, also known as a continuously variable transmission. The difference between a CVT and a stepped transmission is that its gear ratio is not a series of discrete points but a continuous range of values, thereby achieving good fuel economy, power performance, and smooth driving, while also reducing emissions and costs. 2. Working principle: In a CVT transmission system, traditional gears are replaced by a pair of pulleys and a steel belt. Each pulley is actually a V-shaped structure composed of two conical discs. The engine shaft is connected to the small pulley, which drives the large pulley through the steel belt. The secret lies in the special pulley: the construction of the CVT transmission pulley is quite unique, divided into movable left and right halves that can move closer together or further apart.

2

3

Share

What are the tips for reverse parking?

Here are the tips for reverse parking: 1. Adjust the left and right rearview mirrors: The rearview mirrors should be adjusted to a suitable angle for yourself, which can help observe the ground markings. 2. Check the rearview mirrors: Reverse parking requires checking the rearview mirrors, and you may need to learn how to do it correctly. 3. Measure the distance between the car body and the side line: The requirement for reverse parking is that the distance between the car and the starting line or roadside line should be about 1.5 meters. 4. Control the speed: There are specific speed requirements for reverse parking, and you must never drive too fast. Additional information: Here are some precautions to note when reversing: 1. Be aware of blind spots: Almost all vehicles have blind spots, and even convertibles cannot avoid them. Most accidents caused during reversing are due to blind spots, especially those involving hitting or running over children, which are almost entirely caused by blind spots. 2. Do not rely too much on electronic aids during reversing: Vehicles have blind spots, and electronic aids like parking sensors also have blind spots. If you rely solely on these aids during reversing without actually observing the surroundings with your eyes, it can be very dangerous. These aids are only supplementary and cannot be fully relied upon. Always observe more during reversing and double-check for any unusual situations.

2

5

Share

Does the Volvo S60 support wireless CarPlay?

How often should small cars be inspected in 2021?

Where is the Parking Light Switch Located?

What is the Rated Towing Mass?

What are the test items for an automatic transmission driver's license?

Is the Wanliyang CVT25 a steel belt or a chain?

What are the tips for reverse parking?

Is the distance between the left and right lines of the reversing image the width of the car body?

What is the process for obtaining a used car export license?

Is it okay for someone to unplug the ETC when borrowing a car?

Is the turn signal up for left or right?