Does the Volkswagen Dry Dual Clutch Transmission Need an Oil Change?

1 Answers
VanRowan
07/30/25 6:55am
Volkswagen's dry dual-clutch transmission requires a transmission oil change. Here are more details about Volkswagen's dry dual-clutch transmission: 1. Volkswagen has two types of transmission oil: one is mechanical gear oil, also known as gear oil; the other is transmission lubricating oil, also known as gearbox oil. The transmission lubricating oil does not need to be changed, but regardless of the type of transmission, an oil change is necessary. 2. Volkswagen's DSG dual-clutch automatic transmission is essentially a manual transmission with a dual-clutch system and shifting mechanism: the automatic transmission oil in the sealed transmission not only serves a lubricating function but also powers the DSG's shifting valve body and the AT transmission's torque converter through oil pressure. Dirty or deteriorated transmission oil can lead to unstable oil pressure, and prolonged driving under such conditions can cause damage to the transmission.
Was this review help?
7
0
Share
More Forum Discussions

What Causes the Engine Noise in Buick Excelle?

The causes of engine noise in Buick Excelle are: 1. Excessive oil viscosity; 2. Loose belt; 3. High water temperature; 4. Clogged throttle or fuel injector. Taking the 2021 Buick Excelle as an example, its body dimensions are: length 4609mm, width 1798mm, height 1486mm, with a wheelbase of 2640mm. The 2021 Buick Excelle is equipped with a 1.3L turbocharged engine, delivering a maximum horsepower of 163ps and a maximum power of 120kw, paired with a 6-speed automatic manual transmission. It adopts a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
10
5
Share

What does the faucet symbol on the car dashboard mean?

The faucet symbol on the car dashboard indicates an engine malfunction. The reasons for its illumination are: 1. Fuel quality issues: The fuel added to the car has a specific grade, and failure to add it as required can cause engine wear; 2. Poor combustion of the air-fuel mixture: This can lead to engine carbon buildup or knocking problems, which are detected by the engine's oxygen sensor; 3. False faults: Occur due to impacts while driving, tampering with certain engine connectors, or temporary signal interruptions in the ECU; 4. Sensor problems: When the water temperature, crankshaft position, air flow, intake temperature, or oxygen sensors are damaged, have poor contact, or experience signal interruptions, the car's ECU cannot accurately obtain engine data; 5. Maintenance issues: Failure to perform regular maintenance and poor driving habits can increase the burden on the engine operation.
6
1
Share

What does Dongfeng Honda Civic 220 mean?

Dongfeng Honda Civic 220 refers to the engine's maximum torque of 220Nm, which is equipped with a 1.5T four-cylinder turbocharged engine. The Dongfeng Honda Civic has a body size of 4517mm in length, 1799mm in width, and 1434mm in height, with a wheelbase of 2700mm, a minimum ground clearance of 104mm, a fuel tank capacity of 47L, and a body structure of a 5-door, 5-seat hatchback. The maximum power of the Dongfeng Honda Civic is 130kW, matched with a CVT continuously variable transmission. It adopts a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
20
0
Share

What to Do If the Civic's Underbody Guard Plate Falls Off?

It is recommended to install a new guard plate. Relevant details are as follows: 1. Tires: The ninth-generation Civic is equipped with Michelin 205/50R17 Pilot Sport 3 tires, which replace the previous Pilot Exalto and Pilot Sport 2 series. These tires use more environmentally friendly rubber materials overall, incorporating silicon particles that help reduce tire heat during driving. They also feature a special tread pattern to improve drainage performance, ensuring better grip and traction while reducing the risk of skidding. 2. Space: The space performance is quite good, with ample legroom in both the front and rear seats. The front seats offer generous headroom, while the rear seats have somewhat limited headroom. The central floor hump in the rear is not very pronounced, enhancing practicality, and the storage compartments are quite functional. The trunk space has also been improved compared to older models.
8
2
Share

Press the Clutch First or Release the Handbrake First?

When driving a manual transmission car, you should first press the clutch to engage the gear, and then release the handbrake before starting the car. It is important to note that, whether it is an automatic or manual transmission model, the handbrake must always be released last. Below are the relevant explanations: 1. Engage the gear first and then release the handbrake: The main reason is that once the gear is engaged, the power transmission path in the transmission is connected, generating significant torque. If the brakes are not properly applied, the car may suddenly lurch forward, which is very dangerous. The handbrake serves as a double safety measure. 2. Not releasing the handbrake after engaging the gear: All the power output by the engine will be absorbed by the torque converter, causing its temperature to rise sharply. Prolonged operation under these conditions can lead to the torque converter overheating and burning out.
13
3
Share

Where is the radiator fan relay located in a Nissan Sylphy?

Nissan Sylphy's fan relay is located inside the engine compartment fuse box, which can be seen after opening the hood. Below is information about electromagnetic relays: 1. An electromagnetic relay is an electrical relay that operates using the attraction force generated between the electromagnet core and armature within the input circuit. 2. A solid-state relay is a type of relay where electronic components perform their functions without mechanical moving parts, providing input and output isolation. 3. A temperature relay is a relay that activates when the ambient temperature reaches a set value. 4. A reed relay utilizes the action of reeds sealed inside a tube, which serve dual functions as contact springs and armature magnetic circuits, to open, close, or switch circuits.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.