···
Log in / Register

Does the Vezel not have a tire pressure monitoring system?

1Answers
LaNevaeh
09/02/2025, 03:21:07 AM

The Vezel does not come with a tire pressure monitoring system. Tire pressure monitoring involves recording the rotational speed of the tires or using electronic sensors installed in the tires to automatically monitor various tire conditions in real-time, providing effective safety assurance while driving. The Vezel's body dimensions are: length 4328mm, width 1772mm, height 1605mm, with a wheelbase of 2610mm. It has a fuel tank capacity of 50 liters and a luggage compartment capacity ranging from 437 to 1456 liters. The Vezel is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 96kW at 6600rpm and a maximum torque of 155Nm, paired with a 6-speed manual transmission.

Was this review help?
119
Share
More Q&A

How Often Should Nissan Tiida Spark Plugs Be Replaced?

Nissan Tiida spark plugs should be replaced every 40,000 kilometers. Spark plugs are a crucial component of a gasoline engine's ignition system. They introduce high-voltage electricity into the combustion chamber, causing it to jump the electrode gap and produce a spark, thereby igniting the combustible air-fuel mixture in the cylinder. If a spark plug is damaged, it can directly lead to issues such as electrical leakage in the vehicle's ignition system, increased fuel consumption, reduced power output, and most notably, difficulty in ignition, which affects the vehicle's normal operation. Severe spark plug erosion—indicated by pitting, damage, or melted electrodes—signifies that the spark plug is worn out and should be replaced. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, and remove the high-voltage ignition wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris like leaves or dust and ensure everything is cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage ignition wires in the correct firing order, then secure the cover.
104
Share

What is the Ramp Speed Limit?

Generally, vehicles are required to maintain a speed below 40km/h when driving on highway ramps. Below are relevant guidelines on how vehicles should navigate highway ramps: 1. Before entering a highway ramp, drivers should reduce speed in advance and pay attention to speed limit signs posted alongside the ramp. Overtaking on ramps is prohibited. 2. When approaching the ramp junction, do not immediately merge into the main lane. Instead, first enter the acceleration lane to increase speed to the required limit, then safely parallel merge into the main traffic lane. 3. Prior to exiting the main lane onto a ramp, reduce speed early, observe ramp indicator signs, and avoid crossing over the guide lines to prevent missing the ramp exit. If a ramp exit is missed, U-turns are not permitted; proceed to the next exit to leave the highway.
116
Share

How to Replace the Battery When the Geely Car Key Runs Out of Power?

The method to replace the battery when the Geely car key runs out of power is: 1. Press the button on one side to remove the mechanical key; 2. Look for the "OPEN" mark on the remote key shell, insert a flat-head screwdriver into the groove below "OPEN"; 3. Turn the screwdriver to pry open the remote key shell and replace the new battery. Geely models include: Boyue, Vision, Binyue, Haoyue, Xingyue, etc. Taking the 2021 Boyue as an example, its body dimensions are: length 4519mm, width 1831mm, height 1694mm, wheelbase 2670mm, and fuel tank capacity 58l.
119
Share

How many points are deducted for crossing the line during a turn?

During a right-angle turn, if any wheel crosses the road edge line, 100 points will be deducted. Below is additional information: Introduction to Right-Angle Turns: A right-angle turn is an assessment point in Subject 2 of the driver's test. It evaluates the driver's ability to correctly maneuver the steering and accurately judge the inner and outer wheel differentials when driving through sharp turns. Below is an introduction to Subject 2 of the driving test: Field driving (Subject 2) involves actual vehicle operation and is graded only as pass or fail. It consists of nine mandatory test items (all without poles), including reversing into a garage, narrow road U-turns, parallel parking, hill starts and stops, right-angle turns, curve driving, emergency braking, tunnels, and toll booth card retrieval. All nine items must be passed to successfully complete Subject 2.
119
Share

What are the differences between Lexus ES and LS?

The differences between Lexus ES and Lexus LS are as follows: Different levels: Lexus ES is classified as a mid-size luxury car; Lexus LS is classified as a full-size luxury car. Different engines: Lexus ES is equipped with a 2.0L L4 engine; Lexus LS is equipped with a 3.5L V6 engine. Different maximum horsepower: Lexus ES has a maximum horsepower of 173ps; Lexus LS has a maximum horsepower of 299ps. Different maximum torque: Lexus ES has a maximum torque of 208nm; Lexus LS has a maximum torque of 350nm. Different wheelbases: Lexus ES has a wheelbase of 2870mm; Lexus LS has a wheelbase of 3125mm.
117
Share

What is the working principle of the engine oil pressure sensor?

The working principle of the engine oil pressure sensor is: 1. The amplified pressure signal is connected to the oil pressure gauge through the signal line, changing the current ratio between the two coils inside the oil pressure gauge, thereby indicating the engine's oil pressure; 2. The pressure signal, after voltage and current amplification, is also compared with the alarm voltage set in the alarm circuit. When it falls below the alarm voltage, the alarm circuit outputs an alarm signal and lights up the warning light through the alarm line. The solutions for excessively high engine oil pressure are: 1. Adjust the clearance between the shaft neck and bearing of the pressure lubrication part; 2. Clean the oil pipes and oil passages, and maintain the filter; 3. Select the appropriate oil grade; 4. Replace the oil with the appropriate viscosity; 5. Check and adjust the pressure relief valve on the oil pump test bench to ensure the oil pressure meets the specified requirements.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.