Does the Reiz belong to FAW Toyota or GAC Toyota?

2 Answers
LaAmir
09/02/25 5:45am
Reiz belongs to FAW Toyota and is a mid-size car. Taking the 2013 Reiz Jingrui Edition as an example, its body dimensions are: length 4750mm, width 1795mm, height 1450mm, wheelbase 2850mm, front and rear track 1545mm, and fuel tank capacity 70l. The 2013 Reiz Jingrui Edition is equipped with a 2.5L naturally aspirated engine, with a maximum power of 142 kilowatts, maximum power speed of 6200 rpm, maximum torque speed of 4400 rpm, and is matched with a 6-speed automatic transmission. Its front suspension uses a double-wishbone suspension, and the rear suspension uses a multi-link independent suspension.
Was this review help?
10
1
Share
BriannaLee
09/14/25 7:53am
Speaking of the Toyota Reiz, I've driven it a few times, and it completely belongs to FAW Toyota's lineup. FAW Toyota mainly produces sporty sedans like the Reiz, manufactured at the Tianjin plant, while GAC Toyota handles more family-oriented models such as the Camry and Highlander. The Reiz is based on the design of the Toyota Mark X. After its domestic production began in 2005, it was always led by FAW. The driving experience is super stable, with its rear-wheel-drive layout providing quick acceleration. Unfortunately, it was discontinued in 2017. Now, when helping friends choose a car, I remind them: if you're looking for anything related to the Reiz, you can only check at FAW Toyota 4S stores or the used car market. GAC has nothing to do with it, so don't waste time going to the wrong place.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

What Causes the Noise from the Car Belt?

It may be due to the belt slipping on the generator, causing intense friction and vibration between the belt and the pulley, which produces a noise at a certain frequency. Relevant explanations are as follows: 1. Cause: The main reason for belt slipping is belt looseness or aging. Factors that can lead to belt looseness include improper adjustment of the belt tensioner or insufficient tensioner elasticity. In this case, the tension of the belt tensioner should be adjusted first. If there is no improvement, the tensioner should be replaced. 2. Replacement: Belt aging mainly refers to the belt gradually hardening and losing elasticity over prolonged use, resulting in reduced friction with the pulley. In this situation, the only solution is to replace the belt.
5
0
Share

What are the symptoms of a damaged car chassis?

Symptoms of a damaged car chassis: There may be scratches or damage on the surface of the chassis, oil leakage, or unexplained abnormal noises. In severe cases, it may cause the vehicle to deviate from its intended direction. During the design phase, car chassis are built with a certain level of impact resistance. The most vulnerable parts of a car's chassis are various pipelines, such as brake hydraulic pipes and fuel pipes. However, these pipelines are hidden and protected in the grooves of the chassis steel plates and do not protrude above the chassis's horizontal plane. Methods to prevent chassis damage: 1. Apply chassis armor, which can be sprayed on exposed areas of the vehicle chassis, wheel hubs, fuel tank, lower body panels, and trunk. It quickly dries to form a strong, elastic protective layer. 2. Install an engine guard. Engine guards are custom-designed protective devices for various car models, primarily to prevent mud from covering the engine and to protect the engine from damage caused by impacts from uneven road surfaces during driving.
14
2
Share

What causes the rattling noise in the sunroof of the new Magotan?

The causes of rattling noise in the sunroof of the new Magotan: 1. Loose sunroof screws can lead to rattling noises in the headliner and sunroof, and even pose a risk of the sunroof falling off. It is necessary to locate the sunroof screws and tighten them. 2. Dust particles in the sunroof track. Repeated opening and closing of the sunroof inevitably leads to dust accumulation in the track gaps. When dust accumulates to a certain extent, friction occurs during sunroof operation, causing rattling noises. The dust can be removed with a towel, and regular maintenance is recommended. The Magotan originates from the Future B6, which is closely related to the Passat B6, and is the first B-segment sedan produced and sold by FAW-Volkswagen since its establishment. The new Magotan was designed by the team behind the Volkswagen Phaeton, incorporating design elements from the Phaeton. Both the exterior and interior reflect Volkswagen's understated yet luxurious design language for high-end vehicles, presenting an overall effect that is elegant and grand, embodying the luxury of German premium sedans.
15
4
Share

Will the Dashboard Display Low Engine Oil?

Under normal circumstances, the dashboard will not display low engine oil. When the engine lacks oil, the following symptoms may occur: 1. Poor lubrication in splash-lubricated areas inside the engine; 2. If the oil level drops to the point of causing excessively low oil pressure, it will lead to inadequate lubrication on the engine's friction surfaces, resulting in abnormal vibrations, reduced power, and in severe cases, engine bearing failure; 3. Engine bearing failure refers to the burning of the crankshaft bearings and bearing bushings due to poor lubrication, manifesting as abnormal engine vibrations until the engine stalls, after which the engine will not restart; 4. When oil pressure drops too low due to insufficient oil, it can also cause malfunctions in the engine's variable timing solenoid valve, leading to imprecise control of the engine's intake and exhaust valves, resulting in operational abnormalities, reduced power, and increased fuel consumption.
5
4
Share

Can an A3 driver's license be upgraded to an A1 driver's license?

An A3 driver's license can be upgraded to an A1 license. You only need to already possess an A3, B1, or B2 driver's license and meet certain conditions to upgrade to an A1. According to Article 14 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" and the "New Regulations on Streamlining Administration and Delegating Power, Improving Regulation, and Upgrading Services," applicants who wish to add the large passenger vehicle driving category must meet one of the following conditions: Have held a city bus or medium-sized passenger vehicle driving license for at least two years. Have held a large truck driving license for at least three years. Have held a tractor driving license for at least one year. In addition to meeting one of the above conditions, applicants must not have accumulated 12 penalty points in any of the last three scoring cycles before applying. The following circumstances disqualify applicants from upgrading to an A1 license: According to Article 16 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the following individuals are not eligible to apply for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, or large trucks: Those who have caused a fatal traffic accident and bear equal or greater responsibility. Those who have driven under the influence of alcohol. Those whose driver's licenses have been revoked or canceled within the past ten years. Conditions for upgrading to an A1 license: Height: At least 155 cm. Vision: Uncorrected or corrected visual acuity of at least 5.0 on the logarithmic visual acuity chart. Color vision: No red-green color blindness. Hearing: Able to distinguish the direction of sound sources with each ear at a distance of 50 cm from a tuning fork. Upper limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact, with normal limb and finger movement functions. Lower limbs: Both lower limbs must be intact with normal movement functions, and the length difference must not exceed 5 cm. Torso and neck: No movement dysfunction. Age: Between 22 and 60 years old.
10
2
Share

What is the method for adding refrigerant to a car air conditioner?

There are two methods for adding refrigerant to a car air conditioner. One is high-pressure side charging, which is suitable for charging after leak detection and vacuuming. Note that the compressor must not be turned on during this method, the engine must be off, and the refrigerant tank must be inverted. The other method is low-pressure side charging, where gas is added. This method is characterized by slow charging speed and is typically used for replenishing refrigerant. Situations when a car air conditioner needs refrigerant: 1. When the air conditioner is operating normally, continuous bubbles in the sight glass indicate insufficient refrigerant, which needs to be added; 2. When the air conditioner is operating normally, no bubbles in the sight glass, and no temporary bubbles appear when the air conditioner is turned off, it means there is too much refrigerant, which needs to be released; 3. When the air conditioner is operating normally, no bubbles in the sight glass, but temporary bubbles appear when turned off, it indicates the refrigerant level is normal; 4. If the sight glass cannot be found, open the car hood and check if there are oil stains on the air conditioning system joints. If there are, it likely indicates a lack of refrigerant.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.