Does the Lavida have a wagon version?

1 Answers
LydiaMarie
07/29/25 5:08pm
The Lavida does have a wagon version, which is referred to as the hatchback model. The Lavida wagon is equipped with two types of engines: a 1.2-liter turbocharged engine and a 1.4-liter turbocharged engine. The 1.2-liter turbocharged engine delivers a maximum power of 85 kW and a peak torque of 200 Nm, with the maximum power achieved at 5,000 rpm and the peak torque available between 2,000 to 3,500 rpm. The 1.4-liter turbocharged engine produces a maximum power of 110 kW and a peak torque of 250 Nm, with the maximum power achieved at 5,000 rpm and the peak torque available between 1,750 to 3,000 rpm. The Lavida is a sedan produced by Shanghai Volkswagen and was launched in June 2008. While retaining the design language of the A-segment car market, the Lavida embodies a completely new design concept.
Was this review help?
3
3
Share
More Forum Discussions

What Causes Car AC Pipe Freezing and No Cooling?

Car AC expansion valve freezing and no cooling is a refrigerant system icing phenomenon. The specific causes may include the following: The expansion valve's adjustment is too small, resulting in excessively low low-pressure. Insufficient refrigerant in the system causes low evaporation pressure. Clogged interior circulation filter. Malfunctioning thermostat (or temperature sensor) prevents compressor shutdown. Failure of the variable displacement compressor's energy control valve (pressure regulator) keeps the compressor operating at full capacity, causing excessively low pressure and evaporator frosting. Moisture in the refrigerant freezes at low temperatures, forming ice plugs that block capillary tubes. Once capillary tubes are blocked, the refrigeration system cannot cool.
20
2
Share

How to Use the Cruise Control in the Lingpai?

The method to use the cruise control in the Lingpai is: When the vehicle speed reaches above 40 km/h, press the CRUISE button. After pressing, a green CRUISE indicator light will illuminate on the dashboard, indicating that the cruise control has been activated. The dimensions of the Lingpai are: length 4756mm, width 1804mm, height 1509mm, wheelbase 2730mm, and fuel tank capacity 40L. The Lingpai is equipped with a 1.5L naturally aspirated engine, with a maximum power of 80kW and a maximum torque of 134Nm, paired with an eCVT continuously variable transmission.
17
4
Share

What happens if the clutch is released too quickly during gear shifting?

Releasing the clutch too quickly during gear shifting can cause the car to stall. Here are some tips on clutch usage: When shifting from a lower gear to a higher gear: In this situation, there's no need to release the clutch slowly. However, it's important to shift only when the vehicle speed reaches the appropriate shifting speed. At this point, releasing the clutch during upshifting won't negatively affect the car, and since the speed has already increased, the vehicle won't stall. When shifting from a higher gear to a lower gear: You should release the clutch slowly when downshifting. If the clutch is released too quickly, you'll feel noticeable jerking. Therefore, after shifting, slowly release the clutch to give the car a transition period.
8
0
Share

What is the reason for the reversing light not working and the reversing camera not displaying?

Reversing light not working and reversing camera not displaying is due to a damaged reversing light fuse. Here is a detailed introduction to reversing lights: Function: Reversing lights are installed at the rear of the vehicle to illuminate the road behind during reversing and to alert vehicles and pedestrians behind. Installation instructions: Vehicles less than 6 meters in length are required to have one reversing light installed, with an option to install an additional one. Typically, the left fog light and right reversing light are used because the driver's seat is on the left, making it easier to observe vehicles ahead with the fog light on the left; while the reversing light on the right facilitates the driver in reversing and parking on the right side of the road at night.
19
4
Share

What is the purpose of the line on the rearview mirror?

The line on the rearview mirror is used for identifying distance and position. The function of the rearview mirror is to reflect the conditions behind, beside, and below the vehicle, allowing the driver to indirectly observe these areas, thereby expanding the driver's field of vision and enhancing safety during reversing and driving. The adjustment method for the rearview mirror is as follows: 1. Left-side exterior rearview mirror: Adjust the horizon reflection in the mirror to the center, and adjust the reflection of the left side of the vehicle to occupy one-fourth of the right side of the mirror. 2. Right-side exterior rearview mirror: Adjust the horizon reflection in the mirror to two-thirds of the mirror's height, and adjust the reflection of the right side of the vehicle to occupy one-fourth of the left side of the mirror.
17
2
Share

Does the Polo have a sedan version?

polo has a sedan version. The characteristics of a sedan are: high in the middle and low at both ends, symmetrical from the side view, with a long body size that makes parking inconvenient. The Polo is a compact car under SAIC Volkswagen, with body dimensions of: length 4053mm, width 1740mm, height 1449mm, wheelbase 2564mm, and a fuel tank capacity of 42.5L. The Polo is equipped with a 1.5L naturally aspirated engine, with a maximum power speed of 6000rpm and a maximum torque speed of 3900rpm. Its front suspension uses a MacPherson independent suspension, and the rear suspension uses a torsion beam non-independent suspension.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.