···
Log in / Register

Does the latest Audi A6 consume engine oil?

4 Answers
BrodyFitz
07/29/25 12:02am

Audi A6L equipped with the third-generation EA888 engine hardly consumes engine oil, while other A6 models may exhibit oil consumption issues after reaching certain mileage. In fact, oil consumption in German cars is relatively common because their engines operate at higher temperatures, leading to increased oil consumption. Here are some additional details: 1. All car engines have an oil pan: The oil pan is used to store engine oil. 2. During engine operation, temperatures are relatively high: At this time, some of the oil in the engine's oil pan will vaporize. These vapors enter the crankcase forced ventilation system. There is a component in this system called the oil-gas separator, which separates exhaust gases from the vapors produced by oil volatilization.

Was this review help?
12
5
Share
LeMolly
08/12/25 3:15am

As a long-term Audi user who has driven various Audi models for years, including the latest A6, I can confirm that since the 2022 model year, Audi has improved its engine design, essentially resolving the chronic oil consumption issue. The previous EA888 engines did frequently consume oil, but with updated piston rings and seals, the oil consumption rate has significantly decreased. I recommend owners check the dipstick every 5,000 kilometers, with top-ups needed far less often. If abnormal oil loss is noticed, it might indicate rare component defects or driving habits, and a dealership check-up is advised. Overall, the new A6 is much more reliable than older models, with oil consumption now meeting factory standards. However, maintaining regular service habits is crucial for extending engine life and preventing minor issues from escalating into major safety concerns.

Was this review help?
10
0
Share
Expand All
LeJackson
10/01/25 6:45am

I just got a new Audi A6, and after driving it for a few months, the oil consumption is minimal. Unlike the older models that burned oil frequently, now the oil level only drops slightly every 10,000 kilometers, and I only need to top up half a liter. The Audi manual states that normal consumption is acceptable within 1 liter per 2,000 kilometers, and if it exceeds that, I should seek maintenance. While driving, I pay attention to gentle acceleration and avoid constantly revving the engine at high speeds to reduce consumption. The new car's engine has an optimized oil system, resulting in lower failure rates. Anyway, just keep a simple eye on it, don’t worry too much, and enjoy the driving experience—any issues can be covered under warranty.

Was this review help?
4
5
Share
Expand All
Cassidy
11/14/25 8:33am

When discussing oil consumption in the new A6, insights from owner communities indicate significant improvement. Audi has enhanced cooling and lubrication designs in latest engine versions like the EA888 Gen3, keeping oil consumption within reasonable limits. It's barely noticeable during daily driving, though slight increases may occur during track-style driving or long highway trips. I often remind friends to adhere to regular maintenance and use specified oil grades to further minimize risks. Excessive oil consumption typically stems from piston wear or carbon buildup, but with today's optimized technology, owners can use their vehicles with confidence.

Was this review help?
7
4
Share
Expand All
More Forum Discussions

What is the model of the Focus transmission?

The model of the Focus transmission is 4f27e. The following are the functions of the transmission: 1. Change the transmission ratio to meet the traction needs under different driving conditions. 2. Achieve reverse driving. 3. Interrupt the power transmission to the drive wheels when the engine starts, idles, the car shifts gears, or needs to stop for power output. The following are relevant data: The 2020 Focus has a body structure of a 4-door, 5-seater sedan, with a body length of 4378mm, width of 1810mm, height of 1468mm, a wheelbase of 2705mm, a fuel tank capacity of 53L, and a curb weight of 1242kg.
1
0
Share

What is the Volkswagen Tiguan?

Tiguan TSI is the Volkswagen Tiguan L-TSI model. Here is the relevant information: 1. Advantages of the Volkswagen Tiguan: The turbocharged engine delivers strong power, excellent handling performance, and ample interior space. The Tiguan inherits Volkswagen's family design features, presenting an overall look that is bold and full. The front face is robust, and the side profile features smooth lines. 2. In terms of appearance, the Volkswagen Tiguan L is the same as the five-seat version, with only minor adjustments in details or tail badges. The front grille design incorporates a large amount of chrome trim to horizontally stretch the visual effect. The front headlight clusters on both sides are connected to the grille, giving the entire front end a sense of grandeur and stability.
18
0
Share

Where is the electronic parking brake located in a Mercedes-Benz with a column shifter?

In Mercedes-Benz vehicles equipped with a column shifter, the electronic parking brake is also located on the center console between the driver and front passenger seats. Here is more information about the electronic parking brake: 1. The structure of the electronic parking brake differs from that of a mechanical handbrake. The electronic parking brake does not have a handbrake lever or cables. Vehicles equipped with an electronic parking brake will have an electronic parking brake button on the center console, along with two parking brake motors on the rear wheels. 2. Many models from Mercedes-Benz use a column shifter, which is a very practical design. If a column shifter is used, it frees up space on the center console between the driver and front passenger seats, allowing for the design of storage compartments.
5
5
Share

What is the installation method for automotive eccentric bolts?

Eccentric bolt installation method: First, align the protruding part of the copper piece outward, with the shorter side tightly against the inside of the eccentric bolt, then tighten it. Detailed explanations about the functions of eccentric bolts are as follows: 1. Eccentric bolts are commonly used in automobiles, and their installation does not increase the stress on the lower bolts. 2. Eccentric bolts are primarily used to adjust the camber angle of the wheels and the height difference between the left and right wheels. 3. Eccentric bolts mainly adjust the four-wheel alignment, utilizing the physical principles of inclined circular rotation and friction to secure mechanical components. 4. If the wheel camber angle exceeds the standard usage range, adjustment using eccentric bolts is necessary to ensure normal wheel data, effectively avoiding tire wear.
2
2
Share

Are sports cars automatic or manual transmission?

Both types exist, but most sports cars are manual transmission vehicles. Sports cars use manual transmissions primarily to achieve more direct control and driving pleasure. Relevant information about manual transmission vehicles is as follows: 1. Manual transmission vehicles have mature gearbox technology, high reliability, and lower maintenance costs compared to AT automatic transmissions. Being fully manual without electronic assistance, they are purely mechanical structures with low failure rates. The same model with manual transmission is heavier than the automatic version, making the vehicle more stable. 2. Manual transmission vehicles can upshift earlier as needed and can coast, making them particularly suitable for urban driving and more fuel-efficient. 3. When necessary, the engine can be used to control speed, and driving trajectory can be better managed in corners.
8
3
Share

How to Adjust the Headlights of the Outlander?

Mitsubishi Outlander vehicle lights are primarily adjusted according to the actual driving needs by selecting the corresponding gear. The method to adjust the Outlander headlights is as follows: 1. Enter the driver's cabin to locate the vehicle light control lever. 2. The default "OFF" gear is for turning off the vehicle lights. 3. The middle gear is for the position lights (parking lights). 4. Rotating the left knob to the upper gear activates the low beam headlights. 5. The middle knob serves as the control switch for the fog lights. 6. Pushing the light lever upwards activates the right turn signal, while pushing it downwards activates the left turn signal. 7. Pushing the light lever forward keeps the high beam headlights on continuously, and pulling it backward activates the high beam headlights for a single flash.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.