Does the BMW 3 Series Need Transmission Fluid Replacement?

What is the issue with the Haval H6 transmission failure?

Haval H6 transmission failure is caused by improper operation or lack of timely maintenance. If the transmission malfunctions, it is necessary to promptly visit a 4S shop for repairs. The Haval H6 is a compact SUV under the Haval brand. The Haval H6 is equipped with two engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. As the flagship model of the Haval brand, the Haval H6 is positioned as an urban intelligent SUV and was launched at the Great Wall Motors Tianjin new factory. It offers Mitsubishi 2.0L gasoline-powered models and Green Power 2.0T diesel models, available in three versions: Urban, Elite, and Premium.

19

5

Share

What is the wading depth of the Q5L?

The maximum wading depth of the Audi Q5L is 600mm. The wading depth of the Audi Q5L is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Audi Q5L is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause serious damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, the auto start-stop function must be turned off to prevent the engine from automatically restarting after stalling in the water, which could cause serious damage due to water ingress. Based on the situation of the vehicle ahead, assess the underwater road conditions and choose a suitable entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. For roads prone to waterlogging, observe warning water level markers, trees, or other reference points such as the wheels and doors of other vehicles to judge the water depth before deciding whether to proceed. Understand your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not enter the water recklessly; choose an alternative route instead.

7

3

Share

Can car air conditioning be directly charged with refrigerant without vacuuming?

Car air conditioning cannot be directly charged with refrigerant without vacuuming. If the vacuum is not thoroughly performed, the air conditioning will not work effectively. Moisture in the air can freeze and block the expansion valve during cooling, and the high-pressure gauge needle will continuously fluctuate. Hazards of charging refrigerant without vacuuming in car air conditioning: It can cause the compressor's exhaust temperature to be higher than the refrigerant gas temperature; when air enters the system, the condensation pressure will gradually increase; the gas layer formed on the inner surface of the condenser's heat transfer tubes will increase thermal resistance, thereby reducing the condenser's heat dissipation capacity; water reacting with the refrigerant can produce acidic substances, leading to corrosion of pipes and equipment; water and refrigerant are immiscible, resulting in ice blockage at the expansion valve's throttle orifice. Correct method for charging refrigerant in car air conditioning: Prepare a complete and qualified refrigerant charging tool; connect the car air conditioning system to the charging tool adapter; perform vacuuming; inject liquid refrigerant from the high-pressure side to complete the refrigerant charging process.

10

2

Share

What does the A on the car dashboard mean?

There are two scenarios when the letter A appears on the car dashboard: one represents mileage counting, and the other indicates that the auto start-stop function is deactivated. Typically, a car's odometer can display two separate mileage counts - one showing the total distance traveled, and another for individual trip counting, which can be toggled using the black button on the dashboard. When switched to A, it can be used to calculate the distance traveled on a full tank of fuel (reset after refueling), track maintenance intervals, or display the distance between two locations. To reset, simply press and hold the black button. If the auto start-stop is turned off, the dashboard will display a circled A with OFF underneath (some models show a circled A with a slash through it).

7

3

Share

What current should be used to charge a car battery?

When charging a car battery, use a current that is one-tenth of the battery's capacity, and the voltage should be between 14 volts and 15 volts. Typically, the battery of a household car is 12 volts, but in reality, it might be slightly higher. The no-load voltage is around 13 volts, and the load voltage should not be lower than 11 volts. If the voltage is too low, it can cause difficulty in starting the car. The battery is a crucial component in a car, as its function is to store electrical energy. Without this component, the car cannot operate normally. The battery can be charged by the alternator while the car is running. If the car is parked for an extended period, it can easily lead to battery discharge, making it difficult to start the car. Therefore, during long-term parking, the car should be started at least once a week for more than 5 minutes to charge the battery.

13

2

Share

Where Are the Clutch and Accelerator Pedals Located?

Clutch pedal is positioned at the far left, while the accelerator pedal is at the far right. Below are relevant introductions about clutch and accelerator: 1. Clutch: The vehicle's clutch is located inside the flywheel housing between the engine and transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, with its output shaft serving as the transmission's input shaft. 2. Accelerator: In gasoline engines, the accelerator does not control fuel injection volume but rather regulates the throttle valve opening degree. A smaller opening reduces the air-fuel mixture entering the cylinder, resulting in lower engine power output, and vice versa.

18

2

Share

Does the BMW 3 Series Need Transmission Fluid Replacement?

What is the issue with the Haval H6 transmission failure?

What is the wading depth of the Q5L?

Can car air conditioning be directly charged with refrigerant without vacuuming?

What does the A on the car dashboard mean?

What current should be used to charge a car battery?

Where Are the Clutch and Accelerator Pedals Located?

Can the rear seat of the Vision X1 accommodate passengers?

Does the car battery charge at idle speed?

How long should you drive before getting a car service?

Will the car's misfire trigger the malfunction indicator light?