···
Log in / Register

Does the Baojun 730 All Have 7 Seats?

6Answers
JoannaDella
07/28/2025, 11:18:26 AM

Not all Baojun 730 models have seven seats; some have five seats. Here are the specific details about the Baojun 730: 1. Front and Rear Suspension: The Baojun 730 uses a MacPherson independent suspension at the front and a torsion beam non-independent suspension at the rear. 2. Engine: The Baojun 730 is an MPV model, equipped with two types of engines: a 1.5-liter naturally aspirated engine and a 1.5-liter turbocharged engine. The naturally aspirated engine has a maximum power output of 77 kW and a maximum torque of 135 Nm, achieving peak power at 5,600 rpm and peak torque between 3,600 and 5,200 rpm. This engine features DVVT technology and uses an aluminum cylinder head with a cast iron cylinder block. The turbocharged engine delivers a maximum power of 108 kW and a maximum torque of 250 Nm, reaching peak power at 5,200 rpm and peak torque between 2,200 and 3,400 rpm. This engine also incorporates DVVT technology and utilizes an aluminum cylinder head with a cast iron cylinder block.

Was this review help?
115
Share
McStella
08/11/2025, 03:42:17 PM

I've been driving the Baojun 730 for many years. It's basically designed with 7 seats, typically in a 2+2+3 layout. The two independent seats in the second row are comfortable, and the three seats in the third row aren't too cramped, making it very convenient for family trips. The space is quite spacious, with ventilation and storage designs in both the front and rear rows, so even with seven people, it doesn't feel stuffy. Of course, it's important to confirm the specific model, as special versions like the commercial edition might be simplified to 5 seats, but the mainstream models maintain the 7-seat configuration. This car offers great value for money, with good fuel consumption control, making it agile in the city and easy to park. The advantage of an MPV is that the seats can be folded down, increasing the trunk space, which is practical for carrying large luggage. It's quite suitable for daily commuting or weekend outings. Remember to regularly check the seat screws and rails to avoid loosening, which could affect safety.

Was this review help?
19
Share
Expand All
MakaylaMarie
09/29/2025, 01:06:19 AM

My family car is the Baojun 730, which I've been driving for five years. It has seven seats, with independent second-row seats making it easy for elders to get in and out, while the third row keeps the kids comfortable without complaints. This is the standard configuration with unchanged seating capacity, unless you opt for the customized version which is rare. The space is cleverly designed with wear-resistant seat materials that prevent fatigue on long trips. For families, it's cost-effective and fuel-efficient, with evenly distributed airflow from the rear AC vents. When purchasing, check the manual to confirm specifications to avoid mistaking it for an SUV or sedan. I often take the whole family on trips; the adjustable seat angles and foldable third row double the cargo space, making it highly practical. I recommend potential buyers to test drive and experience it firsthand before deciding, rather than just guessing based on specs.

Was this review help?
8
Share
Expand All
LauraAnn
11/12/2025, 02:02:10 AM

The Baojun 730 model is equipped with a 7-seat structure in almost all versions, commonly featuring a 2+3+2 layout with reasonably set seat spacing. It boasts high space utilization, comfortably accommodating seven passengers without feeling cramped. Before purchasing, verify the model to avoid abnormal modifications. This type of MPV design emphasizes versatility, with foldable third-row seats for emergencies and seatbelt buckles ensuring secure fastening. It is economical and suitable for budget-conscious users. The seats offer flexible adjustment, and daily maintenance is straightforward.

Was this review help?
13
Share
Expand All
StManuel
01/02/2026, 03:44:35 AM

I've checked the information on the Baojun 730. It is positioned as a 7-seater, which is consistent across mainstream models. The seating arrangement features three rows in the front, middle, and rear, providing good ventilation and a spacious feel when fully occupied. During the test drive, the seats felt supportive and comfortable, making it suitable for family use. Some used or older models may vary, but all new vehicles come with seven seats. The spacious interior supports group travel. The entry-level models offer sufficient features and are fuel-efficient. Beginners are advised to review the specific configuration table.

Was this review help?
19
Share
Expand All
BrielleFitz
03/30/2026, 04:34:26 AM

The Baojun 730, as an MPV, typically comes with a standard 7-seat configuration, providing ample space. The second row features independent seats for easy movement, while the third row is slightly compact but still comfortable for passengers. It offers great value at an affordable price, making it ideal for small businesses or large families. The seat materials are durable with low wear, keeping maintenance costs under control. The fixed number of seats helps avoid overloading risks. Market feedback highlights its high stability and long-term reliability. Opt for the latest model to ensure full and uniform configurations. Test drive to experience seat comfort before placing an order.

Was this review help?
11
Share
Expand All
More Q&A

Can the 10th Generation Civic Be Shut Down Remotely?

The 10th generation Civic can be remotely shut down using the remote control system. If the engine idles for an extended period while ignited, it will automatically shut down. Below is an introduction to the remote shutdown feature of the 10th generation Civic: 1. When the engine is operating in remote start mode, the wipers, lighting, and audio system remain off, but the vehicle's security system stays active. 2. The engine typically idles for about 10 minutes. If the car key is not detected for a prolonged period, the engine will automatically shut off. 3. If no operation is performed on the remotely started engine for a certain period, the engine will automatically shut down.
111
Share

How to Drift with a Remote Control Car?

After accelerating in a straight line, quickly turn to one side, then after one second, turn in the opposite direction until the desired angle is reached. The arrow indicates "↑+→ (turn the car's front)". Press forward + turn on the spot to make the car spin for a while until it starts to skid. The arrow indicates "↑+→+shift, release →shift". The key is to make the tires skid first. Since it's remote-controlled, your hands need to be skilled and agile. Another method is "↑+← release ↑, ←". When approaching a curve, start pressing the opposite direction key to adjust balance. Then, at the moment when it's almost balanced, release and press up again to achieve a small acceleration.
117
Share

What are the reasons for a car's steering wheel becoming heavier?

There may be two reasons for a car's steering wheel becoming heavier: 1. The tire pressure of the vehicle is too low, causing the contact area between the vehicle and the ground to gradually increase during driving, thereby increasing the friction of the tires, which in turn makes the steering wheel feel heavy and is not conducive to driving safety. 2. There is a fault in the vehicle's toe-in, as toe-in directly affects the return of the steering wheels to the center. Once there is a fault, the steering wheel will also become heavier. During daily use of the vehicle, drivers should be aware of the following steering wheel techniques: 1. During turns, try to avoid turning the steering wheel to its limit, as this can help protect the steering wheel to some extent. 2. During routine vehicle maintenance, owners must regularly check the tie rods to minimize the occurrence of steering wheel shaking or becoming heavier.
111
Share

What are the effects of overfilling engine oil during car maintenance?

Overfilling engine oil during car maintenance can have several effects: 1. It increases fuel consumption and affects engine power. When too much oil is added, the oil level becomes too high, causing a significant portion of the crankshaft to be submerged in the oil. This creates resistance when the crankshaft rotates, greatly increasing rotational drag. 2. It accelerates the formation of carbon deposits and damages certain car components. As the crankshaft churns the oil, a large amount of oil is splashed onto the pistons and cylinder walls, entering the combustion chamber and burning. Carbon deposits have long-term effects on engine power and fuel consumption. 3. It can cause oil leakage from the crankshaft oil seal and shorten the oil's shelf life. The excessive churning of oil increases pressure inside the crankcase, which acts on the crankshaft oil seal, accelerating its aging and deformation, ultimately leading to oil leakage. It also speeds up the oxidation and deterioration of the oil, reducing its shelf life. 4. It worsens exhaust emissions, severely affecting the lifespan of the catalytic converter and potentially causing direct damage to it.
109
Share

Is ACC Constant Power?

ACC is not constant power. The ACC position can supply power to some electrical components in the car without starting the engine. Here is an introduction to the four positions on the car ignition switch: 1. LOCK position: The lock position. If the key is turned to the LOCK position, the entire vehicle will lose power, and the steering wheel will be locked. At this time, the key can also be removed. 2. ACC position: The ACC position is the accessory power position. When the key is turned to this position, the accessory circuit will be activated. 3. ON position: The ON position is the power-on position. When the key is in this position, all vehicle circuits will be activated, and the system will begin necessary preparations and self-checks. During normal driving, the key remains in this position. 4. START position: The START position is the engine start position. When the key is turned to this position, the starter circuit is activated, causing the engine to run and start.
103
Share

What is the strongest adhesive for car spoilers?

If you are worried that the car spoiler is not strong enough, you can use some glass adhesive. Glass adhesive has very strong adhesion, which can firmly attach items to the car. Before use, you can heat the glass adhesive with a hair dryer to slightly increase its adhesive strength, making the spoiler stick more firmly. More details are as follows: 1. Meaning of car spoiler: A car spoiler can also be called a car spoiler or car air deflector, which is part of the car aerodynamic kit. Installing a spoiler on a car can reduce the lift at the rear of the vehicle. If the lift at the rear is greater than that at the front, it can cause excessive steering, reduce rear wheel grip, and worsen the car's stability at high speeds. 2. Trend: Currently, installing a car spoiler has become a way for car owners to show their fashion and individuality, and it can improve the driving stability of the vehicle. Depending on the material, car spoilers can be divided into fiberglass spoilers, aluminum alloy spoilers, and carbon fiber spoilers. However, after installing a car spoiler, it may increase the car's fuel consumption during driving and increase resistance at low speeds.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.